A fabricated structure performed hole slurry anchoring lap construction method under the low-temperature environment comprises the steps that 1, after installation and welding of a connecting reinforcing steel bar, a reinforcing steel bar stirrup and a spiral stirrup at the slurry anchoring lap joint are completed according to the design, a self-limiting temperature electric heating strip is wound around the connecting reinforcing steel bar inside the spiral stirrup, then a fabricated concrete member is cast, and the self-limiting temperature electric heating strip is embedded into concrete; 2, after the member is installed on site, the surface of the concrete member is covered with a heat insulation material; 3, after the self-limiting electric heating strip is powered on for heating for 10 min, a grouting material is poured into the spiral stirrup, and electric heat of the self-limiting temperature electric heating strip is utilized for keeping the grouting material and the concrete member at the temperature being 45+/-5 DEG C for maintenance for 30 min-72 h to be hardened. According to the construction method, the self-limiting temperature electric heating strip is adopted for directly heating the grouting material, it is ensured that the grouting material is not frozen, heating is uniform, heat efficiency is high, and the influence of the environment temperature on the project quality is lowered; the construction is simple and safe and is not limited by the building height or the structural size.