Disclosed herein is a filter surface washer with 8 nozzles and 4 orifices for non-air-scouring of filter medium. The filter surface washer is conceptually original device for sand and dual media rapid filters by gravity. With this type of device, the surface of the filter bed should be washed effectively for a very short period of time. The filter surface washer is very effective for 1 m2 (null11.0 ft2) of filter area. For each surface washer are required 2.5-3 l/sec/m2 (3.5-4.3 gpm/ft2). The velocity of water jet in nozzle orifice should be 12-14 m/sec (39-46 ft/sec). The height of orifice of the nozzle (H0) from top of the filter surface should be 0.1-0.142 m. The values of velocity gradient will be 1000-1500 1/sec for diameter of nozzle's orifice d0null6 mm (nullnull), and for diameter of 4 orifices d0null0.003 m (nullnull), in lower part of the device. These values of velocity gradients should be realized when water level above the filter will be Hnull0.1-0.15 m, during the time of surface washing. On the upper layer of support gravel layers the velocity of water jet will be 0.25-0.275 m/sec (0.82-0.9 ft/sec) about 2-3 times lesser than permissible velocity. The time for surface washing alone is recommended 1-1.5 minutes, for concurrent wash 1-1.5 minutes, and next for backwashing alone 2-4 minute. Cleanliness of granular media will be guaranteed for a long period of time.