One of the critical design parameters occurs when a digital signal is converted into an analog signal. As the supply voltage drops to less than 2 times of threshold voltage to reduce leakage and save power, generating a relative large swing with a resistor-ladder DAC becomes more difficult. For a 5 bit DAC, 32 sub-arrays are used to select the appropriate voltage from the series coupled resistor network. Each sub-array uses p-channel transistors where the sub-array extracting the lowest voltage 700 mV only has a 100 mV of gate to source voltage. To compensate for the reduced gate to source voltage, the sub-arrays are partitioned into four groups. In each group, the p-channel width is increased from 2 um to 5 um, as the tap voltage drops from 1.2 V to 0.7 V. This allows the p-channel transistor with a small gate to source voltage to have a larger width thereby improving performance.