摘要:
A method of assembling an electromagnetic gas valve having a first body, a second body, a unit comprising a valve disc and stem assembly coupled to a moveable insulating structure having a projecting member, an electromagnet assembly comprising a magnet fixed within the second body and a coil wound on a moving part with a cavity adapted to receive the projecting member, the first body having a gas inlet, a gas outlet and a through hole disposed between the gas inlet and outlet. In one implementation the insulating structure is coupled to the electromagnetic assembly by introducing a fluid under pressure into the gas outlet or gas inlet to act upon the unit to cause the projecting member to move in a direction towards the inside of the second body and into the cavity of the moving part of the electromagnet assembly.
摘要:
A system or apparatus that in one implementation includes an electromagnetic valve having an actuator rod with a first coil and a second coil positioned at different longitudinal locations on the actuator rod and being situated electrically parallel to one another in an electrical circuit. The electromagnetic valve is constructed to induce a first voltage in the second coil when the electromagnetic valve is in the open position and to induce in the second coil a second voltage lower than the first voltage when the electromagnetic valve is in the closed position. A switch changeable between a first position and a second position is located in the electrical circuit. When the switch is in the first position the electrical circuit is configured to allow current from a power source to be delivered to the second coil. When the switch is in the second position the electrical circuit is configured to not allow current from a power source to be delivered to the second coil. A control device situated in series with the second coil in the electrical circuit is adapted to detect the open or closed position of the first electromagnetic valve based on the induced voltage of the second coil. The control device is adapted to act upon the switch to change it between the first and second positions. In one implementation, upon detecting that the electromagnetic valve is in the closed position, the control device is configured to act upon the switch to cause it to assume the first position.
摘要:
The rotary gas tap (1) with an electromagnetic safety valve (3), is of the conical regulation member (7) type, and the electromagnetic actuator (3a), being of a smaller power and size, is built entirely into a pipe housing (2a) in the body of the tap. The valve actuator (3a) is of the type where the seal member (9) is lifted by means of a DC voltage. The cylindrical magnetic frame (14) penetrating into the coil (15) is guided inside it, and a magnetic capsule (16) surrounding the coil is of a diameter Dh of around 14 mm, adjusted to that of the housing (8) in the body of the tap (2a). The stroke “R” of the seal member (9) corresponds to a gap (G) greater than 2.5 mm, reaching a sizeable passage opening “A” in the valve (9,10) necessary for a maximum inlet flow (Q) in the tap. At the same time the electromagnetic actuator (3a) is of low power, by means of a low reluctance in the magnetic circuit (13-16), although the diameter “Da” of the cylindrical frame is restricted to less than 4 mm.