摘要:
A noise-cancelling headphone is provided that avoids an influence of the wind and prevents degradation in the sound quality of the reproduced sound output from a driver unit. The noise-cancelling headphone includes an ear piece including a housing unit having an interior and an exterior, a driver unit attached to the housing unit, and a microphone collecting external sounds at the exterior of the housing unit. The housing unit includes an accommodating portion accommodating the microphone and a sound collecting hole establishing the communication between the accommodating portion and the exterior of the housing unit. The accommodating portion is disposed in an upper portion of the housing unit of the noise-cancelling headphone when worn by the user. The sound collecting hole is open toward the upper side of the housing unit of the noise-cancelling headphone when worn by the user.
摘要:
A noise-cancelling headphone is provided that prevents degradation in the sound quality of the sound output from the driver unit caused by the sounds leaking through the vent hole for adjusting the sound quality. The noise-cancelling headphone includes a housing unit having an interior and an exterior, a driver unit attached to the housing unit, and a microphone collecting sound at the exterior of the housing unit. The housing unit includes an accommodating portion accommodating the microphone and a vent hole establishing communication between an air chamber behind the driver unit and the exterior of the housing unit. The housing unit is constructed such that emitted sounds from the vent hole are prevented from being collected by the microphone.
摘要:
A noise-cancelling headphone is provided that avoids an influence of the wind and prevents degradation in the sound quality of the reproduced sound output from a driver unit. The noise-cancelling headphone includes an ear piece including a housing unit having an interior and an exterior, a driver unit attached to the housing unit, and a microphone collecting external sounds at the exterior of the housing unit. The housing unit includes an accommodating portion accommodating the microphone and a sound collecting hole establishing the communication between the accommodating portion and the exterior of the housing unit. The accommodating portion is disposed in an upper portion of the housing unit of the noise-cancelling headphone when worn by the user. The sound collecting hole is open toward the upper side of the housing unit of the noise-cancelling headphone when worn by the user.
摘要:
A blowing device includes a blower and an air duct including an inlet, an outlet, and a body. The outlet faces a longitudinal portion of an oblong target structure toward which air is blown. The outlet allows air to be discharged in a direction that is substantially perpendicular to a longitudinal direction in which the longitudinal portion extends. The inlet has an opening and the outlet has an oblong opening, and the opening of the inlet and the opening of the outlet having different shapes. The body has a passage space formed therein. Plural restraining portions that restrain airflow are disposed at different positions in the passage space in the direction of airflow. A most downstream one of the restraining portions is formed so as to at least partially cover the passage space with an air-permeable member having plural air passage portions that are distributed the air-permeable member.
摘要:
Provided is a blower pipe with an inlet, an outlet, a passage part formed with a passage space to cause air to flow therein, and suppressing parts that are provided in different parts in a direction in which air in the passage space of the passage part is caused to flow and that suppress the flow of the air, wherein an outlet suppressing part constructed so that the passage space in the outlet is closed by a permeable member dotted with ventilation portions is provided in the outlet of the passage part as one of the suppressing parts, and wherein the permeability of an end region present at least at one end in the lateral direction orthogonal to the longitudinal direction among regions along the longitudinal direction of the opening shape of the outlet is set to a smaller value than the permeability of regions other than the end region.
摘要:
The fact that B and R are close to a U axis and to a V axis, respectively, is noted. On that basis, from an example of color adjustment parameters set in directions of colors, it is found out that, when inputted V is in a negative range, B has a small influence. Accordingly, a B component is omitted from calculation in order to reduce a calculation amount. Similarly, components having small influences are omitted when B is in a positive range, when U is in the positive range, and when U is in the negative range. Thereby, adjustment parameters AR, AG, and AB set in directions shown in the drawing can be defined. When inputted V is in the positive range, a V component can be adjusted by multiplying AR by the inputted V. Similar processing is performed when inputted V is in the negative range, when U is in the positive range, and when U is the negative range, respectively. With this taken into consideration by setting values of the adjustment parameters for respective RGB larger than 1 or smaller than 1, color transformation processing for adjusting darkness/lightness of colors can be performed, independently of brightness, so as to bring values of U and V close toward a color component to be increase in intensity. This allows reduction in load of color transformation processing.
摘要:
In an X-Y conversion chart, a threshold Th is defined as Y=0, that is, defined on the X axis, a range from −Th to +Th is defined as a range in which smoothing processing is performed, and a range outside −Th to +Th is defined as a range in which sharpening processing is performed. Among equations denoted by Y1 and Y2 expressed by two linear straight lines, intersections of both the equations Y1 and Y2 are set to the maximum value and the minimum value of an X-Y conversion equation in this case. The threshold is expressed by an intersection of Y2 and the X axis. This algorithm is formed by three factors of: a coefficient α indicating the strength of smoothing; a coefficient β indicating the strength of sharpening; and a threshold Th on the X axis for determining switching between the smoothing processing and the sharpening processing.
摘要:
With a pixel included in image data as a reference pixel, a pixel that shares the same pixel value as the reference pixel or a pixel similar to the reference pixel is judged as a shared pixel, and for the pixel judged as the shared pixel, color of the reference pixel is regarded as a color judgment result of the shared pixel, thus making it possible to reduce color calculation processing for the shared pixel. This makes it possible to provide a color judging apparatus operating at higher speed and the like. Thereby, it is possible to provide the color judging apparatus operable at high speed and the like by reducing the number of times of the color calculation processing executed for an input image.
摘要:
A charging device includes a discharge electrode that extends along a rotational axis direction of a member to be charged that rotates and has an arc-shaped outer peripheral surface, the discharge electrode being arranged to face the outer peripheral surface; a potential control plate arranged between the outer peripheral surface of the member to be charged and the discharge electrode and extending in the rotational axis direction of the member to be charged, the potential control plate being plastically deformed so as to independently maintain the shape of the potential control plate; and a support member that supports the potential control plate only at both end portions of the potential control plate in a long-side direction of the potential control plate.
摘要:
A light emitting device includes: a first semiconductor region; a second semiconductor region and third semiconductor region which are provided in the first semiconductor region; a first semiconductor light emitting element of which first electrode is electrically connected to a main surface of the second semiconductor region; a second semiconductor light emitting element of which third electrode is electrically connected to a main surface of the third semiconductor region; and a conductor which electrically connects the second electrode of the first semiconductor light emitting element and the third semiconductor region, and which electrically connects the second electrode and the third electrode through the third semiconductor region. In the light emitting device, the semiconductor light emitting elements are connected in series, and are directly connected to a power source.