摘要:
In the construction of a wireless network in a building, structure conditions such as the floor plan of the building and the shape of the floor, material conditions such as materials for structures, and the like have a great effect on radio wave propagation characteristics. This causes a problem that unless these pieces of information are taken into consideration, an accurate layout design of wireless base stations cannot be made. In the construction of a new wireless network in a building, a wireless network similar to structure conditions of a newly constructed building is extracted from structure conditions of past buildings in which a wireless network is constructed. The layout positions of wireless base stations used in the extracted wireless network are regarded as the layout positions of wireless base stations in the new wireless network.
摘要:
An information processor capable of ensuring time synchronization accuracy, ensuring EtherCAT command consistency, and easily developing the software based on a 2-port configuration even when a communication path error occurs includes: an arithmetic section; at least two communication sections each including a transmission section and a reception section; and a redundant communication control section that controls a communication path between the arithmetic section and the communication section. The redundant communication control section includes: a communication path state determination section that determines a network path state; and a redundant path switching section that switches connection between the arithmetic section and at least two communication sections.
摘要:
A multistage relay communication system 100 includes a trunk network 1 and branch networks 2 (2a, 2b), each of which includes one or more communication apparatuses 4. The communication apparatus 4 can switch between a trunk mode to operate in the trunk network 1 and a branch mode to operate in the branch network 2. In the trunk network 1, the communication apparatus 4 carries out fixing of a communication path and redundancy of data based on a path table in order to achieve real-timeness and a data arrival rate. Meanwhile, in the branch network 2, when a communication failure occurs, the communication apparatus 4 autonomously searches for a communication path and constructs a path table, in order to at least secure a data arrival rate even if real-timeness is impaired within an allowable range.
摘要:
A communication control unit and a communication control system are provided in which control devices can synchronously operate. In a communication control system in which a communication control unit and multiple control devices having an actuator to operate a control target are connected via a network, the communication control unit provides a control command to the control devices, synchronizes times of the communication control unit and the control devices, obtains communication delays relative to the control devices, collects control start times of the control devices, obtains a time by subtracting the control start time from a predetermined time as a start time of the control device, calculates a time obtained by subtracting the communication delay from the start time for each control device, and transmits the control command to the control devices before the earliest time of the calculated times.
摘要:
A storage medium management part includes a stored data amount adjustment part that: stores a maximum data amount which the storage medium can store at the time of startup of a storage control device, and a stored data amount which is an initial stored amount, in a data amount storage part; upon receiving a write amount of a data in response to a write request, writes a new stored data amount calculated by adding the write amount to the already stored data amount, over the already stored data amount; calculates a free space by subtracting the stored data amount from the maximum data amount; determines a deletion amount of the data if the free space does not takes a value not less than a prescribed value; and writes a newly-calculated stored data amount calculated by subtracting the deletion amount from the stored data amount, over the stored data amount.
摘要:
A network system includes one or more terminals which transmit acquired data to a first network, a network interconnection device which is connected to the terminal via the first network and which receives the data from the terminal, and a management server which is connected to the network interconnection device via a second network and which receives the data from the network interconnection device; the terminal transmits the same data to the network interconnection device via the first network by a frequency corresponding to redundancy; the data contains the priority according to the contents of the data; and the network interconnection device acquires the communication quality of the second network and instructs the terminal to transmit the data according to redundancy determined based upon the acquired communication quality and the priority.
摘要:
A computer system, being a stack bus system in which a plurality of computer modules are stacked and connected to one another and being capable of automatically matching and allocating bus resources such as clocks and interrupts, is provided. In the computer system including one system module and n peripheral modules, each peripheral module includes an interrupt selector, a clock selector, an arbitration signal selector, a resource decision unit, and a position identification unit. The position identification unit cooperates with a position configuration unit present in the system module to identify a position of the module, which includes the position identification unit, in the computer system, and autonomously decides bus resources used by the module. By allowing the interrupt selector, the clock selector, and the arbitration signal selector to select and use the decided bus resources, each peripheral module can match and configure the bus resources in the computer system.
摘要:
The present invention is an inner touch panel in which a 1st and a 2nd planer member, each having an electrode disposed on one surface thereof, oppose each other with a fixed space therebetween. The electrodes face each other across the space, and a polarizing plate is stacked on the other surface of the 1st planer member. At least one of the 1st and the 2nd planer members is a film made of a siloxane crosslinking acrylic silicone resin. Here, in the case of having a thickness in the range of 0.1 mm and 0.4 mm, the film maintains, after heat treatment at 120° C. for 1000 hours, 96% or more of the visible light transmittance at a wavelength of 400 nm before the heat treatment.
摘要:
On a first substrate are formed a TFT provided to each pixel, an insulating film which covers the TFT, and a reflective layer which is provided on the insulating film so as to be insulated from the TFT and reflects light incident from a second substrate side. The reflective layer is covered with a passivation film on which a first electrode made of a transparent conductive material, such as ITO having the work function equivalent to a second electrode, is formed and connected to the TFT. The passivation film covering the reflective layer prevents the reflective surface of the reflective layer from deteriorating in reflection properties during a process for connecting the TFT and the first electrode. Further, the first and second electrodes having similar characteristics can symmetrically AC drive the liquid crystal layer.
摘要:
An information processor disclosed herein prevents adverse impacts on higher priority processing due to extremely frequent receive processing when inbound traffic from a network is over-traffic state (under a DoS attack). The information processor attached to a network collects information about traffic state and, if it is determined that over-traffic state is present, deactivates the communication processing function without passing an interrupt request due to communication to the data processing block. In this state, the information processor continues to collect information about traffic state and, when it is determined that over-traffic state has terminated, starts to transfer an interrupt request to the data processing block and makes the communication processing function recover.