摘要:
A method of continuously casting thin strip dynamically controlling roll casting surface configuration by controlling the temperature of water flowing through the longitudinal water flow passages in a cylindrical tube thickness of no more than 80 millimeters of counter rotated casting rolls, and varying the speed of the casting rolls with attenuation of the ends of the casting rolls with a casting roll drive system responsive to electrical signals received from sensors during a casting campaign.
摘要:
A thin cast steel strip and method of making thereof with improved resistance to microcracking, where the steel strip is produced by continuous casting and contains a carbon content between about 0.010% and about 0.065% by weight, less than 5.0% by weight chromium, at least 70 ppm of total oxygen and between 20 and 70 ppm of free oxygen, and manganese to sulfur ratio greater than about 250. The carbon content in the cast strip may be below about 0.035%, less than 0.005% by weight titanium, and the average manganese to silicon ratio in the strip produced may be greater than 3.5. The carbon content may be less than 0.035%, the casting speed less than 76.68 meters per minute, and the tundish temperature of the molten metal is maintained below 1612° C. (2933.7° F.).
摘要:
A method for making alloy strip by continuous casting with tensile strength of at least 900 MPa and total elongation of at least 30%, strip with tensile strength of at least 1200 MPa and total elongation of at least 20%, or strip with tensile strength of at least 1500 MPa and total elongation of at least 15%. Molten metal is introduced forming a casting pool supported on the casting rolls and counter-rotating the A heat flux is provided with a peak heat flux >20 Mw/m2. The strip is cooled at 1000-3000 K/sec. A roll biasing force >40 kN/meter of casting roll length is applied to form thin metal strip. The strip is then conveyed through a first enclosure with an atmosphere having an oxygen content of
摘要:
A method of continuously casting thin strip dynamically controlling roll casting surface configuation by controlling the temperature of water flowing through the longitudinal water flow passages in a cyclindrical tube thickness of no more than 80 millimeters of counter rotated casting rolls, and varying the speed of the casting rolls with attenuation of the ends of the casting rolls with a casting roll drive system responsive to electrical signals received from sensors during a casting campaign.
摘要:
A thin cast steel strip and method of making thereof with improved resistance to microcracking, where the steel strip is produced by continuous casting and contains a carbon content between about 0.010% and about 0.065% by weight, less than 5.0% by weight chromium, at least 70 ppm of total oxygen and between 20 and 70 ppm of free oxygen, and manganese to sulfur ratio greater than about 250. The carbon content in the cast strip may be below about 0.035%, less than 0.005% by weight titanium, and the average manganese to silicon ratio in the strip produced may be greater than 3.5. The carbon content may be less than 0.035%, the casting speed less than 76.68 meters per minute, and the tundish temperature of the molten metal is maintained below 1612° C. (2933.7° F.).
摘要:
A method of controlling heat flux between the casting pool and the surfaces of the casting roll in a strip steel casting process includes controlling the concentration of nitrogen in the steel melt. The concentration of nitrogen may be controlled to achieve an operational heat transfer to the casting roll. The beat flux to the casting rolls may be controlled by maintaining the sum of partial pressures calculated from the nitrogen and hydrogen concentrations in the casting pool below 1.15 atmospheres. Decreasing the concentration of nitrogen can increase heat flux at the casting rolls.
摘要:
A method of controlling in a twin roll strip caster the thickness of as-cast strip by determining and operating at a target depth of the casting pool and a target speed of the casting rolls. The as-cast strip may be cast to a customer-specified thickness or may be subsequently rolled to a customer-specified thickness.
摘要:
Apparatus and method for continuously casting metal strip includes a pair of casting rolls having casting surfaces with a center portion, edge portions each having average surface roughness between 3 and 7 Ra, and intermediate portion between each edge portion and the center portion, the center portion average surface roughness between 1.2 and 4.0 times the edge portion surface roughness, and the intermediate portions average surface roughness between that of the edge and center portions. The surface roughness of the center portion is tapered across its width, and may be tapered across its width is in stepped zones. The center portion may have surface roughness varied across the surface to correspond to a desired variation in metal shell thickness across the cast strip. The center portion may be at least 60% of the casting roll width, and each edge portion may be up to 7% of the casting roll width.
摘要:
Apparatus and method for continuously casting metal strip includes a pair of casting rolls having casting surfaces with a center portion, edge portions each having average surface roughness between 3 and 7 Ra, and intermediate portion between each edge portion and the center portion, the center portion average surface roughness between 1.2 and 4.0 times the edge portion surface roughness, and the intermediate portions average surface roughness between that of the edge and center portions. The surface roughness of the center portion is tapered across its width, and may be tapered across its width is in stepped zones. The center portion may have surface roughness varied across the surface to correspond to a desired variation in metal shell thickness across the cast strip. The center portion may be at least 60% of the casting roll width, and each edge portion may be up to 7% of the casting roll width.
摘要:
During continuously casting metal strip, delivering molten metal supported on the casting surfaces of the casting rolls, and counter rotating the casting rolls to form metal shells on the casting surfaces brought together at the nip to deliver cast strip downwardly with a controlled amount of mushy material between the metal shells, determining at a reference location downstream from the nip a target temperature for the cast strip corresponding to a desired amount of mushy material between the metal shells of the cast strip, sensing the temperature of the cast strip cast downstream from the nip at the reference location and producing a sensor signal corresponding to the sensed temperature, and causing an actuator to vary the gap at the nip between the casting rolls in response to the sensor signal received from the sensor and processed to determine the temperature difference between the sensed temperature and the target temperature.