摘要:
When harvesting forage in the form of a large round bale, for instance, there are times in which a windrow of forage material lies outside the side boundaries of the bale-forming chamber. This may be due to the windrow being made wide by machinery having driven through it, or by wind, or because of the need to turn the forage harvesting equipment tightly. A wide pickup, notably wider than the width of the bale-forming chamber, provides a solution to this common problem. Dual augers at each end of the wide pickup provide the force to direct the forage into a narrower path, to enter the bale-forming chamber. The orientation and size of the augers permits the pickup header to reside in the same location it would if it was not wider than the baler. Tines or teeth of various rigidities and shapes are provided in the pickup for more effective pickup of the forage.
摘要:
When harvesting forage in the form of a large round bale, for instance, there are times in which a windrow of forage material lies outside the side boundaries of the bale-forming chamber. This may be due to the windrow being made wide by machinery having driven through it, or by wind, or because of the need to turn the forage harvesting equipment tightly. A wide pickup, notably wider than the width of the bale-forming chamber, provides a solution to this common problem. Dual augers at each end of the wide pickup provide the force to direct the forage into a narrower path, to enter the bale-forming chamber. The orientation and size of the augers permits the pickup header to reside in the same location it would if it was not wider than the baler. Tines or teeth of various rigidities and shapes are provided in the pickup for more effective pickup of the forage.
摘要:
A reverser which, in a preferred embodiment, has a hydraulic cylinder supported by a chopper baler frame. The opposite end of the hydraulic cylinder is attached to the reverser driver. When activated by hydraulics on a tractor, the hydraulics will extend the cylinder, causing the sprockets to be disengaged. Further extension of the cylinder will cause the reverser driver to engage the reverser sprocket and turn the rotor backwards slightly. After full extension, the cylinder will then be retracted. This process can be repeated a couple of times in order to remove the blockage. The reverser enables the operator to restore the baler to its working condition from the tractor seat. Being able to disengage the rotor from the rest of the machine enables the bale to be wrapped if a major blockage occurs. Also a controlled reversing motion is beneficial, so over-reversing does not occur.
摘要:
A reverser which, in a preferred embodiment, has a hydraulic cylinder supported by a chopper baler frame. The opposite end of the hydraulic cylinder is attached to the reverser driver. When activated by hydraulics on a tractor, the hydraulics will extend the cylinder, causing the sprockets to be disengaged. Further extension of the cylinder will cause the reverser driver to engage the reverser sprocket and turn the rotor backwards slightly. After full extension, the cylinder will then be retracted. This process can be repeated a couple of times in order to remove the blockage. The reverser enables the operator to restore the baler to its working condition from the tractor seat. Being able to disengage the rotor from the rest of the machine enables the bale to be wrapped if a major blockage occurs. Also a controlled reversing motion is beneficial, so over-reversing does not occur.
摘要:
A voltage recovery system and its method of operation provides voltage protection to a load connected to a distribution network of a utility power system or network by boosting the voltage on a distribution line, during a momentary voltage sag caused by a fault or other contingency. The method includes voltage protection from a voltage recovery system to a load connected to a distribution network of a utility power network. A voltage protection characteristic required by the load is selected. On the basis of electrical characteristics of the voltage recovery system and the distribution network, a determination is made as to whether the voltage recovery system is capable of providing the required first voltage protection characteristic. Determining whether the voltage recovery system is capable of providing the required voltage protection characteristic includes determining a fault current capability characteristic of the distribution network and the maximum voltage improvement characteristic that the voltage recovery system can provide. If the voltage protection characteristic is greater than the maximum voltage improvement characteristic, the fault current capability characteristic and the maximum voltage improvement characteristic are used to determine an impedance in the form of an inductor to be added to the distribution network.