摘要:
Disclosed is a tilt-swivel base for a CRT display terminal. The base allows the CRT terminal to be readily swiveled around a vertical axis and tilted forward or backward around a horizontal axis or positioned with a combination of both movements. The cradle of the base may be placed within a recess formed in a horizontal supporting surface and thereby confine the base within the recess. By having the recess front-to-back width approximately equal to the front-to-back width of the cradle and the side to side length greater than the side to side width of the cradle, the CRT display terminal and base can be moved from side to side within the recess while still confining it to a fixed front-to-back position. By providing the cradle with a convex front surface and a triangular back surface, the base and CRT display terminal may be swiveled up to the point that one of the two angled back edges of the cradle comes into full contact with the back edge of the recess. The cradle is attached to the rocker drum of the base by means of a shouldered bushing which is attached to the center of the rocker drum by a screw.
摘要:
A cathode ray tube display terminal includes a printed circuit logic board permanently mounted in a molded plastic enclosure assembly during "on the shelf" storage and shipment of the enclosure as a spare part and during normal operation of the CRT display terminal. The enclosure assembly includes a top portion and a lower portion which snap together. The printed circuit logic board is assembled between the upper and lower portions of the enclosure which are secured by a single screw. A snap-out section allows replacement of a read only memory on the logic board.
摘要:
Each electronically operated customer installable/replaceable unit module of a computer system is separately packaged to totally enclose the electronic/mechanical parts of each module within a box-like container or wrapper, the structure designed to maximize air flow through the system. This includes an electronics base module containing the basic logic circuits for the system, a power module containing all of the systems power supply circuits, and a pair of storage modules each containing the electronics and mechanical parts of a diskette device. The modules are loosely inserted into comparably shaped opened compartments of an enclosure base and bezel assembly constructed for toolless installation and removal of modules. An enclosure top cover which fits into the bezel contains finger-like protrusions in addition to embossing. When latched to the base and bezel assembly, the top cover correctly positions and holds the modules in place.