摘要:
A method and apparatus for adaptive handover includes receiving a time to trigger (TTT) for a first mobility state. A scaling factor is received for a second mobility state. The TTT for the second mobility state is determined by scaling the first mobility state with the scaling factor for the second mobility state.
摘要:
A method and an apparatus for performing a handover in an evolved universal terrestrial radio access network (E-UTRAN) are disclosed. A wireless transmit/receive unit (WTRU) sends a measurement report to a source evolved Node B (eNB), and receives a handover command from the source eNB. The WTRU initiates reception and processing of a primary broadcast channel (P-BCH) at the target cell after receiving the handover command. The WTRU then sends a random access preamble to the target eNB, receives a random access response from the target eNB, and sends a handover complete message to the target eNB. The reception and processing of the P-BCH may be initiated immediately after receiving the handover command or after sending the handover complete message. The WTRU may apply default configuration or source cell configuration in the target cell until a target cell SFN and/or P-BCH information are acquired.
摘要:
A method and an apparatus for performing a handover in an evolved universal terrestrial radio access network (E-UTRAN) are disclosed. A wireless transmit/receive unit (WTRU) sends a measurement report to a source evolved Node B (eNB), and receives a handover command from the source eNB. The WTRU initiates reception and processing of a primary broadcast channel (P-BCH) at the target cell after receiving the handover command. The WTRU then sends a random access preamble to the target eNB, receives a random access response from the target eNB, and sends a handover complete message to the target eNB. The reception and processing of the P-BCH may be initiated immediately after receiving the handover command or after sending the handover complete message. The WTRU may apply default configuration or source cell configuration in the target cell until a target cell SFN and/or P-BCH information are acquired.
摘要:
A method and apparatus are disclosed relating to ciphering and de-ciphering of packet units in wireless devices during retransmission in wireless communications. The packet units are re-segmented with the ciphering done on the re-segmented packet unit or on a radio link control protocol data unit (RLC PDU) with or without segmentation. Alternatively, the re-segmentation is done on the radio link control service data unit (RLC SDU) with or without segmentation. Alternatively, the ciphering process and multiplexing of the RLC PDU is done in the medium access control (MAC) layer of a MAC PU before undergoing a hybrid automatic repeat request (HARQ) process for retransmission. Further, the ciphering process in the RLC is done on a packet data convergence protocol packet data unit (PDCP PDU).
摘要:
Method and apparatus are disclosed for determining a physical uplink power level for transmissions on a physical uplink channel. In one embodiment, a random access channel (RACH) uplink message is transmitted. The RACH uplink message includes a RACH message power level and/or a downlink pathloss figure. A downlink message including a power offset value is received. The physical uplink power level is set for transmissions on the physical uplink channel based on the power offset value. In another embodiment, a RACH uplink message is transmitted and a downlink message including a relative power offset value is received. The physical uplink power level for transmissions on the physical uplink channel is then set based on the relative power off set value.
摘要:
Method and apparatus are disclosed for determining a physical uplink power level for transmissions on a physical uplink channel. In one embodiment, a random access channel (RACH) uplink message is transmitted. The RACH uplink message includes a RACH message power level and/or a downlink pathloss figure. A downlink message including a power offset value is received. The physical uplink power level is set for transmissions on the physical uplink channel based on the power offset value. In another embodiment, a RACH uplink message is transmitted and a downlink message including a relative power offset value is received. The physical uplink power level for transmissions on the physical uplink channel is then set based on the relative power off set value.
摘要:
Several medium access control methods are disclosed. One such method is a method for requesting an uplink resource allocation. In this method, a wireless transmit/receive unit (WTRU) receives a trigger and sends an uplink resource request to a Node B based on the trigger. The WTRU receives an uplink resource assignment and prepares for an uplink transmission using the resource assignment. The WTRU then sends an acknowledgement that the uplink resource allocation was received. A wireless transmit/receive unit according to one embodiment includes a trigger device and a processor. The trigger device is configured to receive a trigger. The processor is in communication with the trigger device, and is configured to send an uplink resource request upon receipt of the trigger, receive an uplink resource assignment, and send an acknowledgement upon receipt of the uplink resource assignment.
摘要:
A method and apparatus of performing packet data convergence protocol (PDCP) re-establishment includes determining a PDCP re-establishment trigger. An error event is detected based upon the PDCP re-establishment trigger, and PDCP re-establishment procedures are requested.
摘要:
A method and apparatus are described for implementing a reset procedure for radio link control (RLC) using radio resource control (RRC) signaling. A wireless transmit/receive unit (WTRU) receives a request for RLC reset. A processor at the WTRU comprises a RRC entity and a RLC entity. The RRC entity receives the request for a RLC reset in a radio resource control message. The RLC entity reassembles RLC service data units (SDUs) from any protocol data units (PDUs) that are received out of sequence at a receiving side of the RLC entity. The reassembled SDUs are delivered in sequence to a packet data convergence protocol entity (PDCP). At the receiving side of the RLC entity, any remaining PDUs that are not able to be reassembled are discarded. At a transmitting side of the RLC entity, all SDUs and PDUs stored in transmit buffers are discarded.
摘要:
Methods and apparatus support configuration and/or control of the radio link control (RLC) and packet data convergence protocol (PDCP) sub-layers by defining and utilizing radio resource control (RRC) parameters and procedures, and by including information elements (IEs) in RRC messages in both the uplink and downlink for RLC and PDCP configuration.