摘要:
An active antenna element to transmit and/or receive RF (Radio Frequency) signals is positioned in relation to a backplane that reflects RF signals. One or more passive antenna elements can be disposed on a similar side of the backplane as the active antenna element. Settings of the one or more passive antenna elements are adjusted to produce an input/output beam pattern that varies depending on whether the at least one passive antenna element is reflective or transmissive. Based on this technique, an RF input output beam pattern of an antenna assembly including the backplane, active antenna element and passive antenna elements can be controlled for better reception and transmission of RF signals.
摘要:
An antenna apparatus, which can increase capacity in a cellular communication system or Wireless Local Area Network (WLAN), such as an 802.11 network, operates in conjunction with a mobile subscriber unit or client station. At least one antenna element is active and located within multiple passive antenna elements. The passive antenna elements are coupled to selectable impedance components for phase control of re-radiated RF signals. Various techniques for determining the phase of each antenna element are supported to enable the antenna apparatus to direct an antenna beam pattern toward a base station or access point with maximum gain, and, consequently, maximum signal-to-noise ratio. By directionally receiving and transmitting signals, multipath fading is greatly reduced as well as intercell interference.
摘要:
A wireless handset including an antenna array. The antenna array includes an active antenna element and two passive antenna elements. The active and passive antenna elements are arranged to form a triangle with a vertex. The vertex includes a vertex angle and the active antenna element is disposed at the vertex. The vertex angle is between 90 degrees and 180 degrees.
摘要:
An antenna apparatus, which can increase capacity in a cellular communication system or Wireless Local Area Network (WLAN), such as an 802.11 network, operates in conjunction with a mobile subscriber unit or client station. At least one antenna element is active and located within multiple passive antenna elements. The passive antenna elements are coupled to selectable impedance components for phase control of re-radiated RF signals. Various techniques for determining the phase of each antenna element are supported to enable the antenna apparatus to direct an antenna beam pattern toward a base station or access point with maximum gain, and, consequently, maximum signal-to-noise ratio. By directionally receiving and transmitting signals, multipath fading is greatly reduced as well as intercell interference.
摘要:
An antenna apparatus, which can increase capacity in a cellular communication system or Wireless Local Area Network (WLAN), such as an 802.11 network, operates in conjunction with a mobile subscriber unit or client station. At least one antenna element is active and located within multiple passive antenna elements. The passive antenna elements are coupled to selectable impedance components for phase control of re-radiated RF signals. Various techniques for determining the phase of each antenna element are supported to enable the antenna apparatus to direct an antenna beam pattern toward a base station or access point with maximum gain, and, consequently, maximum signal-to-noise ratio. By directionally receiving and transmitting signals, multipath fading is greatly reduced as well as intercell interference.
摘要:
An antenna assembly includes at least two active or main radiating omni-directional antenna elements arranged with at least one beam control or passive antenna element used as a reflector. The beam control antenna element(s) may have multiple reactance elements that can electrically terminate it to adjust the input or output beam pattern(s) produced by the combination of the active antenna elements and the beam control antenna element(s). More specifically, the beam control antenna element(s) may be coupled to different terminating reactances to change beam characteristics, such as the directivity and angular beamwidth. Processing may be employed to select which terminating reactance to use. Consequently, the radiator pattern of the antenna can be more easily directed towards a specific target receiver/transmitter, reduce signal-to-noise interference levels, and/or increase gain by using Radio Frequency (RF), Intermediate Frequency (IF), or baseband processing. A Multiple-Input, Multiple-Output (MIMO) processing technique may be employed to operate the antenna assembly with simultaneous beam patterns.
摘要:
An antenna array that uses at least two passive antennas and one active antenna disposed above a ground plane, but electrically isolated from the ground plane, and a respective resonant strip positioned beneath each passive antenna. The passive antenna elements are positioned about the active element, and each of the at least two passive antenna elements is individually set to a reflective or a transmissive mode to change the characteristics of an input/output beam pattern of the antenna apparatus.
摘要:
An antenna array having a central active element and a plurality of passive elements surrounding the active element is disclosed. A dielectric substrate or other slow wave structure is disposed radially outwardly from the passive elements for slowing the radio frequency waves so as to increase the antenna directivity by reducing the amount of energy radiated in the elevation direction.
摘要:
An active antenna element to transmit and/or receive RF (Radio Frequency) signals is positioned in relation to a backplane that reflects RF signals. One or more passive antenna elements can be disposed on a similar side of the backplane as the active antenna element. Settings of the one or more passive antenna elements are adjusted to produce an input/output beam pattern that varies depending on whether the at least one passive antenna element is reflective or transmissive. Based on this technique, an RF input output beam pattern of an antenna assembly including the backplane, active antenna element and passive antenna elements can be controlled for better reception and transmission of RF signals.
摘要:
An antenna assembly includes at least two active or main radiating omni-directional antenna elements arranged with at least one beam control or passive antenna element used as a reflector. The beam control antenna element(s) may have multiple reactance elements that can electrically terminate it to adjust the input or output beam pattern(s) produced by the combination of the active antenna elements and the beam control antenna element(s). More specifically, the beam control antenna element(s) may be coupled to different terminating reactances to change beam characteristics, such as the directivity and angular beamwidth. Processing may be employed to select which terminating reactance to use. Consequently, the radiator pattern of the antenna can be more easily directed towards a specific target receiver/transmitter, reduce signal-to-noise interference levels, and/or increase gain. A Multiple-Input, Multiple-Output (MIMO) processing technique may be employed to operate the antenna assembly with simultaneous beam patterns.