摘要:
A battery capacity predicting method predicts a remaining capacity of a battery unit including a plurality of battery cells connected in series in an apparatus which uses the battery unit. The battery capacity predicting method includes the steps of comparing output voltages of each of the battery cells, and predicting the remaining capacity of the battery unit based on at least one of a minimum voltage and a maximum voltage out of the compared output voltages of the battery cells.
摘要:
A battery unit includes a plurality of cells connected in parallel with one another, and a switch connected in series with at least one of the cells. The battery unit further includes a control circuit for controlling the on or off state of the switch, and a voltage detection terminal at which a voltage produced by a cell, to which the switch is connected, is developed. The switch can be turned off even with the battery unit connected to a load. A cell in series with which the switch is connected is disconnected from the load. In this state, the state of the cell can be detected through the voltage detection terminal. Even when a resistor is substituted for the switch, the same advantage can be provided. Moreover, the battery unit is freely detachably attached to a main unit of an information processing apparatus. The battery unit then supplies power to the main unit. A power supply control circuit for requesting notification of the state of each cell in the battery unit is incorporated in the main unit. The states of the cells can therefore be detected mutually independently.
摘要:
A protection circuit is used for a battery unit which has a plurality of cell parts coupled in parallel, and first and second power supplying terminals, where each of the cell parts includes a plurality of battery cells coupled in series, and first and second terminals respectively coupled to the first and second power supplying terminals. The protection circuit includes a plurality of switching elements making an electrical connection to the first terminal of a corresponding one of the cell parts and the first power supplying terminal, and disconnecting the electrical connection in response to an active signal, and a voltage monitoring circuit outputting the active signal to the switching elements when a voltage of at least one battery cell within one cell part falls outside a predetermined range, independently with respect to each of the cell parts.
摘要:
A control system for charging enabling efficient charging of rechargeable batteries in an electronic apparatus which charges its rechargeable batteries by using a charger circuit when driving the apparatus by using an external power source, including first detecting unit for detecting a differential value between a maximum permissible charging current allowed by the rechargeable batteries and a charging current flowing to the rechargeable batteries; second detecting unit for detecting a maximum usable current by detecting a differential value between a maximum supplyable current allowed by the external power source and the current consumption of the apparatus; third detecting unit for detecting a differential value between a maximum useable current and the charging current flowing to the rechargeable batteries; and control unit for controlling the system in accordance with the differential values detected by the first and third detecting units so that the charger circuit generates the maximum charging current within the range where the charging current flowing to the rechargeable batteries does not exceed either of the maximum permissible charging current and the maximum useable current.
摘要:
A control system for charging enabling efficient charging of rechargeable batteries in an electronic apparatus which charges its rechargeable batteries by using a charger circuit when driving the apparatus by using an external power source, including first detecting unit for detecting a differential value between a maximum permissible charging current allowed by the rechargeable batteries and a charging current flowing to the rechargeable batteries; second detecting unit for detecting a maximum usable current by detecting a differential value between a maximum supplyable current allowed by the external power source and the current consumption of the apparatus; third detecting unit for detecting a differential value between a maximum useable current and the charging current flowing to the rechargeable batteries; and control unit for controlling the system in accordance with the differential values detected by the first and third detecting units so that the charger circuit generates the maximum charging current within the range where the charging current flowing to the rechargeable batteries does not exceed either of the maximum permissible charging current and the maximum useable current.
摘要:
A control system for charging enabling efficient charging of rechargeable batteries in an electronic apparatus which charges its rechargeable batteries by using a charger circuit when driving the apparatus by using an external power source, including first detecting unit for detecting a differential value between a maximum permissible charging current allowed by the rechargeable batteries and a charging current flowing to the rechargeable batteries; second detecting unit for detecting a maximum usable current by detecting a differential value between a maximum supplyable current allowed by the external power source and the current consumption of the apparatus; third detecting unit for detecting a differential value between a maximum useable current and the charging current flowing to the rechargeable batteries; and control unit for controlling the system in accordance with the differential values detected by the first and third detecting units so that the charger circuit generates the maximum charging current within the range where the charging current flowing to the rechargeable batteries does not exceed either of the permissible charging current and the maximum useable current.
摘要:
An electronic apparatus system includes a battery pack housing batteries and a battery pack connection section connecting the battery pack to the electronic apparatus, the electronic apparatus operable with one of electric power from an external power supply and electric power from the battery pack. A pseudo battery pack includes a power holding unit holding electric power to be supplied to the electronic apparatus, wherein if the external power supply is used and the external power supply fails to supply the electric power, the pseudo battery pack is mounted on the battery pack connection section.
摘要:
A power supply circuit charging a secondary battery by a DC-DC converter using a switching element and an inductance element includes a current adjustment circuit. The current adjustment circuit adjusts a charging current of the secondary battery by turning on/off the switching element according to a voltage difference of a lower one of a reference voltage and a first control voltage corresponding to a temperature of the secondary battery from a current detection voltage corresponding to the charging current of the secondary battery.
摘要:
A DC-DC conversion circuit is configured by including a plurality of control signal generation circuits, a plurality of soft-start control circuits, and a start control circuit. The plurality of control signal generation circuits correspond to the plurality of control signals, and generate a corresponding control signal of the plurality of control signals based on a corresponding output value of a plurality of output values. The plurality of soft-start control circuits correspond to the plurality of control signals, and control a variation of the corresponding control signal at a start time of the DC-DC conversion circuit. The start control circuit instructs the corresponding soft-start control circuit to start operation in accordance with a change of the control signal taking part in an output control at the start time of the DC-DC conversion circuit.
摘要:
A control circuit for a power supply device, a power supply device, and the like are provided in which the power supply device has a plurality of DC/DC converters provided for generating voltage while the mutual relationship of potential between the voltage outputs is maintained. The control circuit 20 in the power supply device 10 which outputs different direct current voltages (VCC, VBGP, and VBGN) includes a voltage setting unit 22 for determining the setting level of a second direct current voltage VBGP which has a potential relationship with the setting level of the first direct current voltage VCC which is one of a plurality of the different direct current voltages.