摘要:
A hoist motor (12) for an elevator (14) is continuously driven from an irregular power supply (16). A regenerative drive (10) delivers power between the power supply (16) and the hoist motor (12). A controller (11) measures a power supply voltage in response to a detected change in the power supply voltage and controls the regenerative drive (10) to adjust a nominal motion profile of the elevator (14) in proportion with an adjustment ratio of the measured power supply voltage to a normal power supply voltage.
摘要:
A hoist motor (12) for an elevator (14) is continuously driven from an irregular power supply (16). A regenerative drive (10) delivers power between the power supply (16) and the hoist motor (12). A controller (11) measures a power supply voltage in response to a detected change in the power supply voltage and controls the regenerative drive (10) to adjust a nominal motion profile of the elevator (14) in proportion with an adjustment ratio of the measured power supply voltage to a normal power supply voltage.
摘要:
In a pulse width modulation-controlled, switched bridge, DC converter, the phase angle (44, 45) of the AC mains (4) is provided without sensing the voltage thereof, by a phase-locked loop (47) having one input (75) derived (126) from the in-phase voltage command Vde* (61) and another finit (77) approximating the line frequency; the phase-locked loop is initialized at a phase angle &thgr;init(76) equal to the arctangent (124) of the in-phase Vdest, and quadrature Vqest representation of estimated line voltages ere, ese, ete (119-121) derived during an initialization cycle from reconstruction of the fundamental component of the AC main currents at a phase angle (93) changing with said frequency. Reconstruction includes providing the discrete Fourier transform (DFT, 81) of signals indicative of currents (37) in the AC mains and the inverse DFT (122) of the resultant Fourier coefficients eia, eib.
摘要:
An encoder failure in an elevator drive system is detected and managed. A velocity of the elevator drive system is provided by an encoder signal (60) and compared with a minimum velocity threshold (62). An encoder fault timer is incremented when the velocity is less than the minimum velocity threshold (64). The elevator drive system is disabled when the encoder fault timer reaches a fault threshold time (66).
摘要:
An encoder failure in an elevator drive system is detected and managed. A velocity of the elevator drive system is provided by an encoder signal (60) and compared with a minimum velocity threshold (62). An encoder fault timer is incremented when the velocity is less than the minimum velocity threshold (64). The elevator drive system is disabled when the encoder fault timer reaches a fault threshold time (66).
摘要:
A three-phase regenerative drive (20) is operated based upon power from a single-phase AC source (12) and power from a DC source (14). The single-phase AC input power and the DC input power are converted to DC voltage on a DC bus (24) by a three-phase converter (22). DC power is provided from the DC bus (24) to a three-phase inverter having outputs connected to a motor (34). A controller (44) controls operation of the three-phase converter (22) based upon contribution factors of the AC and DC sources (12, 14) during motoring and regeneration. The controller (44) also controls an AC component of current from the DC source to reduce ripple current on the DC bus (24).
摘要:
A system continuously drives a motor during normal and power failure operating conditions. A regenerative drive delivers power to the motor from a main power supply during the normal operating condition and from a backup power supply during the power failure operating condition. A controller operates the regenerative drive to provide available power on the regenerative drive to the backup power supply during the normal operating condition.
摘要:
A system (10) continuously drives an elevator hoist motor (14) during normal and power failure operating conditions. A regenerative drive (30, 34, 36) delivers power to the hoist motor (14) from a main power supply (17) during the normal operating condition and from a backup power supply (24) during the power failure operating condition. A controller (12) operates the regenerative drive (30, 34, 36) to provide available power on the regenerative drive (30, 34, 36) to the backup power supply (24) during the normal operating condition.
摘要:
A powering arrangement (32, 34) for a device (30, 22) that normally operates on three phase power has the capability of operating based upon single phase power. One disclosed technique includes estimating a direct component based upon a measured voltage across the leads coupled with the single phase power supply. The quadrature component is estimated based upon a numerical derivative of the direct component. The direct component is also provided to a current regulator in a feed forward control manner, which minimizes error.
摘要:
A system continuously drives a motor during normal and power failure operating conditions. A regenerative drive delivers power to the motor from a main power supply during the normal operating condition and from a backup power supply during the power failure operating condition. A controller operates the regenerative drive to provide available power on the regenerative drive to the backup power supply during the normal operating condition.