摘要:
A layered tape having pockets therein is used as part of a communication cable to improve alien crosstalk attenuation. In one embodiment, a single layered tape has an embossed layer bonded to a matrix tape layer having non-continuous conductive traces, with the resulting layered tape reducing alien crosstalk between cables. Pockets resulting from the embossing are filled with a gas such as dry air to decrease the dielectric constant through the effective thickness of the tape. A layered tape may alternatively be provided as a separate tape from a matrix tape, such that coupling between conductive pairs of the cable and the matrix tape is reduced. Decreasing the dielectric constant of materials between adjacent cables also decreases alien crosstalk coupling between the cables.
摘要:
An intelligent physical layer management system is provided that includes active electronic hardware, firmware, mechanical assemblies, cables, and software that guide, monitor, and report on the process of connecting and disconnecting patch cords plugs in an interconnect patching environment. RFID tag integrated chips are used to identify which switch port a patch cord is plugged into. The system is capable of monitoring patch cord connections to detect insertions or removals of patch cords or plugs. In addition, the system can map the patch field in interconnect configurations.
摘要:
An intelligent network patch field management system is provided that includes active electronic hardware, firmware, mechanical assemblies, cables, and software that guide, monitor, and report on the process of connecting and disconnecting patch cords plugs in an interconnect or cross-connect patching environment. RFID tag integrated chips are used in some embodiments of the system to allow for detection of patch cord insertion and removal at switch ports. RFID tags may also be used to detect users and control access to the network based on the users' levels of authorization. Network access can also be controlled at the outlet jack level. The system is capable of monitoring patch cord connections to detect insertions or removals of patch cords or plugs. In addition, the system can map entire networks.
摘要:
A system for managing and documenting a local area communications network is provided which deploys power sourcing equipment and powered devices by the use of active electronic modules, having an Ethernet controller and Power over Ethernet forwarding capabilities, as integral, managed components within the cable plant, to enhance management, documentation, security and emergency 911 aspects of the network as well as extending the physical reach of the network.
摘要:
Intelligent patch panels support patch cord management in communications networks. Modular patch panels can be connected to one another for the purposes of sharing power and also for the purposes of monitoring patch cord connections and reporting the status of patch cord connections to a network management system. Each port of an intelligent patch panel may be provided with out-of-band contacts to allow for monitoring and reporting of patch cord connectivity information. According to one embodiment, out-of-band contacts send identification information regarding their associated patch panel ports along a ninth wire of a patch cord.
摘要:
A method and apparatus are provided for monitoring and reporting cable connectivity such as patch panel port-level connectivity on a real-time basis. For patch panel systems, the approach is based upon a distributed architecture that may be modularly scalable and may reduce, if not eliminate, the need for a centralized signal processor and complex cabling between patch panels and the centralized signal processor. Each patch panel may determine port level connectivity independently. Polling delays and polling-related overhead processing may be reduced or eliminated by supporting real-time monitoring of port connectivity at the port level. The approach provides improved real-time reporting of patch panel connectivity with reduced cabling complexity, increased reliability, and decreased maintenance costs. In addition, the approach is compatible with (i.e., may communicate with and be controlled by) a multipurpose network management system (NMS). In addition, a compatible revision system is provided.
摘要:
An AC common mode backchannel signaling system is used to provide outlet ID information in a communication network. Wire pairs of a communication network are used to support the AC common mode backchannel signaling system, while also supporting Ethernet communications as well as Power Over Ethernet (PoE). Query and receiving AC circuitry is provided in an intelligent patch panel, and outlet ID receiving and response AC circuitry is provided in communication outlets. These two sets of AC circuitry use the AC common mode backchannel signaling system to communicate with one another, without disrupting PoE or Ethernet signaling on the wire pairs of the network.
摘要:
A network documentation and revision system is presented that includes first and second devices connected by a patch cord. The first device has provisioning and signal ports with corresponding contact assemblies. The second device has a switch port without a contact assembly. The patch cord has signal and control wires, a first connector that connects the signal wires into a signal port and the control wire to a corresponding contact assembly, and a second connector that connects the signal wires to the switch port and terminates the control wire. The second connector contains an indicator controlled by control circuitry, detection circuitry detecting whether the second connector is plugged into the second device, and ID circuitry providing an ID number through the first connector. Installation or removal of the patch cord is guided by indicators on the patch cord and first device without retrofit contacts being added to the second device.
摘要:
An active jack, which is a powered device, is installed as the network connection at a workstation which provides the capability to determine the physical location of a destination device, such as a VoIP phone, in real time. Uninterruptible power supplies may be used to provide power to network components, for example during an emergency. Power-and-data deployments are shown for powering network components and destination devices.
摘要:
An active jack, which is a powered device, is installed as the network connection at a workstation which provides the capability to determine the physical location of a destination device, such as a VOIP phone, in real time. Uninterruptible power supplies may be used to provide power to network components, for example during an emergency. Power-and-data deployments are shown for powering network components and destination devices.