摘要:
A toner for electrophotography is provided including a binder resin, a colorant, a charge control agent, and a release agent, wherein a glass transition temperature (Tg) is over 55° C., a molecular weight distribution (MWD) is in the range of about 4.5 to 5.5 when a weight average molecular weight is in the range of about 45,000 to 55,000, and a compression elastic modulus is about 750 MPa or higher at room temperature. Mechanical properties of toner can be obtained at room temperature by controlling rheological properties of toner. The developing properties and fixing properties of toner for electrophotography can be improved by lowering viscosity at a high temperature, and thus image quality can be stabilized.
摘要:
A toner for electrophotography is provided including a binder resin, a colorant, a charge control agent, and a release agent, wherein a glass transition temperature (Tg) is over 55° C., a molecular weight distribution (MWD) is in the range of about 4.5 to 5.5 when a weight average molecular weight is in the range of about 45,000 to 55,000, and a compression elastic modulus is about 750 MPa or higher at room temperature. Mechanical properties of toner can be obtained at room temperature by controlling rheological properties of toner. The developing properties and fixing properties of toner for electrophotography can be improved by lowering viscosity at a high temperature, and thus image quality can be stabilized.
摘要:
A toner for electrophotography includes a polyester-based resin, a colorant, a charge controlling agent, and a releasing agent, wherein the toner does not substantially comprise of an organic tin, and generates about 100 ppm or less of volatile organic compounds at a temperature of about 150 to about 200° C.
摘要:
A toner for electrophotography is provided that includes a binder resin, a colorant, a charge control agent, and a releasing agent, wherein the toner has a complex viscosity (η) of about 4.0×101 Pa·s to about 1.6×103 Pa·s at a temperature ranging from about 40° C. lower than a toner fixing temperature to about 10° C. higher than the toner fixing temperature and has a specified activation energy of 15 to 85 KJ/mol. By defining viscosity dependency in a linear modulus region of a toner and comprehensively defining thermal and rheological properties with respect to fixing conditions, a fixing phenomenon can be generalized and the quality of a toner can be evaluated.
摘要:
A toner for electrophotography is provided that includes a binder resin, a colorant, a charge control agent, and a releasing agent, wherein the toner has a complex viscosity (η) of about 4.0×101 Pa·s to about 1.6×103 Pa·s at a temperature ranging from about 40° C. lower than a toner fixing temperature to about 10° C. higher than the toner fixing temperature and has a specified activation energy of 15 to 85 KJ/mol. By defining viscosity dependency in a linear modulus region of a toner and comprehensively defining thermal and rheological properties with respect to fixing conditions, a fixing phenomenon can be generalized and the quality of a toner can be evaluated.
摘要:
An electrophotographic toner includes a binder resin, a colorant, and a releasing agent, wherein the electrophotographic toner has a complex viscosity (η) of 4e2 Pa·s to 8e3 Pa·s at a temperature range of 120 to 160° C. and an angular velocity range of 1.6 to 10 rad/s, a rate of change of the complex viscosity of 165 to 185 Pa·s/° C. at 1.6 rad/s, and 70 to 80 Pa·s/° C. at 10 rad/s within the temperature range, a stress relaxation of 1.0 e3 to 4.5 e4 Pa at a relaxation time of 0.05 to 0.3 seconds under a temperature range of 120 to 160° C., and a rate of change of the stress relaxation (ΔG/ΔT) of 785 to 1000 Pa/° C. at 0.05 seconds and 190 to 215 Pa/° C. at 0.3 seconds within the temperature range above.
摘要:
An electrophotographic toner includes a binder resin, a colorant, and a releasing agent, wherein the electrophotographic toner has a complex viscosity (η) of 4e2 Pa·s to 8e3 Pa·s at a temperature range of 120 to 160° C. and an angular velocity range of 1.6 to 10 rad/s, a rate of change of the complex viscosity of 165 to 185 Pa·s/° C. at 1.6 rad/s, and 70 to 80 Pa·s/° C. at 10 rad/s within the temperature range, a stress relaxation of 1.0 e3 to 4.5 e4 Pa at a relaxation time of 0.05 to 0.3 seconds under a temperature range of 120 to 160° C., and a rate of change of the stress relaxation (ΔG/ΔT) of 785 to 1000 Pa/° C. at 0.05 seconds and 190 to 215 Pa/° C. at 0.3 seconds within the temperature range above.
摘要:
A toner for electrophotography is provided including a binder resin, a coloring agent, a charge controlling agent, and a releasing agent, wherein when the temperature of the toner is in the range from a temperature 40° C. lower than a fixing temperature of the toner to a temperature 10° C. lower than the fixing temperature of the toner, the D Log η*/DT absolute value is 0.02 or more, when the temperature of the toner is in the range from a temperature 10° C. lower than the fixing temperature of the toner to a temperature 10° C. higher than the fixing temperature of the toner, the D Log η*/DT absolute value is 0.005 or less, and the complex viscosity (η*) of the toner at a fixing temperature and an angular velocity of a fixing heat roller is in the range from about 5.0×101 Pa·s to 1.0×102 Pa·s. The toner has excellent fixing properties so that the quality of an image can be stabilized, and cause less contamination.
摘要翻译:提供了一种用于电子照相的调色剂,其包括粘合剂树脂,着色剂,电荷控制剂和脱模剂,其中当调色剂的温度低于低于所述调色剂的定影温度40℃ 调色剂比调色剂的定影温度低10℃,当调色剂的温度在10℃以下时,D Log eta * / DT绝对值为0.02以上 调色剂的定影温度比调色剂的定影温度高10℃,D Log eta * / DT绝对值为0.005以下,并且调色剂在固定时的复数粘度(eta *) 定影加热辊的温度和角速度在约5.0×10 -1 Pa〜1.0×10 -2 Pa的范围内。 调色剂具有优异的定影性能,使得图像的质量可以稳定,并且引起较少的污染。
摘要:
A variable tension type belt fusing unit includes a main roller, a pair of belt driving rollers which is disposed near the outer circumferential surface of the main roller and is pressurized towards the main roller, and a fusing belt having a nip portion and a non-tension portion. At least one of the pair of belt driving rollers is independently and temporarily driven to apply or release a tension to the nip portion. In a driving method of the variable tension type belt fusing unit, the tension is applied to the nip portion of the fusing belt when the variable tension type belt fusing unit is prepared for an operation, the fusing belt travels while maintaining the tension during the operation of the variable tension type belt fusing unit, and the tension is released when the operation is completed.
摘要:
A variable tension type belt fusing unit includes a main roller, a pair of belt driving rollers which is disposed near the outer circumferential surface of the main roller and is pressurized towards the main roller, and a fusing belt having a nip portion and a non-tension portion. At least one of the pair of belt driving rollers is independently and temporarily driven to apply or release a tension to the nip portion. In a driving method of the variable tension type belt fusing unit, the tension is applied to the nip portion of the fusing belt when the variable tension type belt fusing unit is prepared for an operation, the fusing belt travels while maintaining the tension during the operation of the variable tension type belt fusing unit, and the tension is released when the operation is completed.