摘要:
When it is intended to realize a lens having a large NA with one lens, an adjustment precision between both surfaces of the lens is very strict. Accordingly an objective lens having an NA of 0.8 or more was usually realized by two lenses. However, a working distance is small, and collision of the objective lens with a disc is apt to occur. A coma corrector for compensating coma caused by decentering of both surfaces in realizing the high NA lens with one lens is added. However, in this case, astigmatism occurs when the objective lens decenters from the coma corrector relatively accompanied with a tracking operation. The objective lens and the coma corrector are fixed to a mirror barrel so as to be unified with each other, and driven by a two-dimensional lens actuator. With such a constitution, decentering of the objective lens and the coma corrector does not occur, and hence astigmatism does not occur.
摘要:
An optical disc drive using either one of a first disc (e.g., DVD) and a second disc (e.g., CD), is provided with a first laser diode that emits a shorter wavelength beam, a second laser diode that emits a longer wavelength beam, an objective lens, and a driving unit that holds and rotates the optical disc. The optical axis of the objective lens is inclined relative to a normal to the optical disc. The first laser diode is located at a first position so that the coma, which is caused when the first laser beam is converged on a data recording surface of the first disc, is minimized, and the second laser diode is located at a second position so that the coma, which is caused when the second laser beam is converged on a data recording surface of the second disc, is minimized.
摘要:
An objective lens converges a shorter wavelength laser beam on a DVD having a protective layer, which is 0.6 mm thick, and a longer wavelength laser beam on a CD having a protective layer, which is 1.2 mm thick. A common region is defined on the objective lens. The common region provides a numerical aperture appropriate for converging the longer wavelength laser beam on the CD. Coma of the objective lens in the first region is compensated better in a case where the longer wavelength laser beam is converged on the CD than a case where the shorter wavelength laser beam is converged on the DVD.
摘要:
A coma compensating element has two refraction surfaces. The refraction surfaces provide, as a whole, no aberration with respect to rays perpendicularly incident thereon, while the refraction surfaces provide coma with respect to rays obliquely incident thereon.
摘要:
To stably carry out recording and reproducing to and from a high density optical disk without using a double servo in the optical disk using a high NA objective lens. A detection of a spherical aberration and a detection of a coma aberration in a radial direction are simultaneously performed, and the coma aberration generated with the offset of an objective lens 109 is corrected in real time, thus enlarging an allowable offset amount of the objective lens. In order to simultaneously detect the spherical aberration and the coma aberration, focal shift and tracking shift signals in an inside region and outside region of reflected light flux are detected respectively, and the differential signals are set as spherical aberration and coma aberration signals.
摘要:
When reproducing a multilayer optical disk using a high-numerical-aperture objective, the period of time required before the disk is reproduced is reduced by discriminating recording layers. A spherical aberration signal is detected as a differential signal between focus position fluctuation signals respectively in a central section and in a peripheral section of a reproduced flux of light. A recording layer is discriminated using a quantity of correction of spherical aberration at a zero-crossing point of a level or a spherical aberration signal associated with the differential signal. After adding the spherical aberration for the correction of the discriminated layer, residual spherical aberration is corrected by feedback control using a residual spherical aberration signal.
摘要:
To stably carry out recording and reproducing to and from a high density optical disk without using a double servo in the optical disk using a high NA objective lens. A detection of a spherical aberration and a detection of a coma aberration in a radial direction are simultaneously performed, and the coma aberration generated with the offset of an objective lens 109 is corrected in real time, thus enlarging an allowable offset amount of the objective lens. In order to simultaneously detect the spherical aberration and the coma aberration, focal shift and tracking shift signals in an inside region and outside region of reflected light flux are detected respectively, and the differential signals are set as spherical aberration and coma aberration signals.
摘要:
To stably carry out recording and reproducing to and from a high density optical disk without using a double servo in the optical disk using a high NA objective lens. A detection of a spherical aberration and a detection of a coma aberration in a radial direction are simultaneously performed, and the coma aberration generated with the offset of an objective lens 109 is corrected in real time, thus enlarging an allowable offset amount of the objective lens. In order to simultaneously detect the spherical aberration and the coma aberration, focal shift and tracking shift signals in an inside region and outside region of reflected light flux are detected respectively, and the differential signals are set as spherical aberration and coma aberration signals.
摘要:
To reduce an effect of reflected light from a layer (or layers) other than a layer to be read upon focus position control when reading a multilayer optical disk in an optical disk drive. In an optical system where a focus error signal is generated by the knife edge method, a photodetector 53 that is divided into four parts is used. Each of two pairs of light detecting elements on the right or left side are formed by division of a detection plane of the photodetector such that the reflected light from a neighboring layer falls half-and-half on that pair of the light detecting elements. Signals from the photodetector are given with alternating polarities in such a way that any adjacent light detecting elements have mutually different polarities and are added up together to form the focus error signal.
摘要:
The optical disk medium permits an increase in recording density using a complex refractive index variation of an inorganic oxide film in a super-resolution medium using an inorganic oxide film. The reflectance of the disk increases due to the complex refractive index variation of the inorganic oxide film. Specifically, in the case where the inorganic oxide film is an oxide film comprising Co, a reflect addition film is provided. The effective spot diameter used for read-out is reduced, thereby increasing recording density. By using a material for which the complex refractive index varies sharply, the recording density can be approximately doubled.