US10146694B1
Implementations are provided herein for having at least two data streams associated with each file in a file system. The first, a cache overlay layer, can store additional state information on a per block basis that details whether each individual block of file data within the cache overlay layer is clean, dirty, or indicates that a write back to the storage layer is in progress. The second, a storage layer, can be a use case defined repository that can transform data using data augmentation methods or store unmodified raw data in local storage. File system operations directed to the cache overlay layer can be processed asynchronously from file system operations directed to the storage layer.
US10146692B2
Preventing a prefetch memory operation from causing a transaction to abort by receiving by a local processor a prefetch request from a remote processor. Determining whether the prefetch request conflicts with a transaction of the local processor. Responding to at least one of i) a determination that the local processor has no transaction, and ii) a determination that the prefetch request does not conflict with a transaction of the local processor, by providing a requested prefetch data. Responding to a determination that the prefetch request conflicts with a transaction of the local processor by determining an evaluation of the prefetch request. Performing at least one of i) an abort of the prefetch request, ii) a quiesce the prefetch request, iii) a delay in the processing of the prefetch request for a delay period, and iv) an execution of the prefetch request based on the evaluation the prefetch request.
US10146671B2
Methods, computer program products, and systems are presented. There can be provided inputting a set of test transactions into a shadow production system, wherein providing of a set of test transactions includes modifying of a set of transactions of a production system, and obtaining a result of the inputting.
US10146668B1
A code coverage tool applies predefined rules applicable to user input to determine a test scenario from predefined test cases to best achieve a code coverage goal. For example, the code coverage goal may specify a target percentage of code coverage for areas, functions, conditions, or statement of interest to the user. The user input may select built-in rules or user supplied rules, and the user input may specify areas or functions that are mapped to the test cases. The built-in rules prioritize selected test cases for execution at run time to provide code coverage maximization with minimum utilization of resources. The user input may also specify a type of coverage, a test case priority, and a test case type.
US10146660B2
A method, system, and computer readable storage medium for providing data to a user interface for performance monitoring are disclosed, in which an a data definition is acquired, where the data definition is generated in response to a definition of the user interface. Data is acquired from data sources based on the data definition. The acquired data is processed based on the data definition, and the processed data is cached.
US10146655B2
A method for determining an integrity of an execution of a code fragment is provided. The method includes identifying a reference signature for the code fragment within an abstracted representation of a program code comprising the code fragment. Further, the method includes executing the code fragment and determining a signature of the executed code fragment. The method includes comparing the signature with the reference signature.
US10146652B2
One embodiment provides a method for storing data in a data storage system. The method comprises copying a data set into a buffer in a data storage center in response to receiving a write command for the data set; updating a content map; and sending to a second data storage center a parity write command for the data set. The method continues with copying the data set into a buffer in the second data storage center; updating a second content map; and sending to the first data storage center an acknowledgement indicating the parity write command is complete. Then in response to receiving the acknowledgement, updating the first content map; moving the data set to a storage unit in first data storage center; and acknowledging the data set is protected. Finally, releasing the data set from the first buffer; and updating the first map content.
US10146648B1
Replication of a storage object to a remote storage array is seamlessly maintained by i) while write operations directed to the storage object are being collected into a set of write cycles that are stored in a master storage array, also collecting the write operations directed to the storage volume into a set of write cycles stored in a slave storage array, and ii) in response to detecting a failure of the master storage array, and while the host computer continues to access the storage object using a copy of the storage object located in the slave storage array, transmitting the write cycles stored in the slave storage array to the remote storage array, so that the remote storage array can apply the write operations in the write cycles it receives from the slave storage array on the copy of the storage object contained in the remote storage array.
US10146647B2
Various systems, methods, and apparatuses for operating a wireless charging device in an electric vehicle are disclosed. One method includes detecting a system fault indicative of one or more faults in the wireless charging device in the electric vehicle or in the transmitter. The method further includes determining a fault severity level from a plurality of fault severity levels based on a type of the system fault detected. A total number of types of system faults can be greater than a total number of the plurality of fault severity levels. The method further includes performing one or more system fault response operation based on the determined fault severity level. Each of the plurality of fault severity levels can be associated with a different set of system fault response operations.
US10146645B2
A method includes sending a data retrieval request regarding a data segment of a data object to redundant array of independent disk (RAID) memory and to dispersed storage network (DSN) memory. The method further includes receiving a first read response from a first one of the RAID memory and the DSN memory. The method further comprises recovering the data segment from the first read response. The method further includes determining whether to wait for a second read response from a second one of the RAID memory and the DSN memory. When the computing device determines to wait, the method further includes receiving the second response within a given time frame. The method further includes recovering a copy of the data segment from the second read response. When the data segment substantially matches the copy of the data segment, the method further includes utilizing either the data segment or the copy of the data segment.
US10146643B2
A computer-implemented method for recovering data and concurrently rebuilding indexes for the recovered data in a database for a system configured to store fewer than all indexes in backup files may include copying data from one or more database files and storing the copied data to one or more backup files. A recovery manager executing on a processor may read the copied data from the one or more backup files and write the copied data to the one or more database files, wherein the data is recovered to the one or more database files. In response to the reading, an index manager executing on the processor may initiate a rebuilding of one or more indexes for the copied data at substantially the same time as the reading of the copied data.
US10146634B1
Systems and methods for backing up and restoring virtual machines in a cluster environment. An instrumentation interface enables configuration data to be stored with save sets during backup and enables the configuration of the destination to be adjusted based on the stored configuration during a restore.
US10146631B1
An incremental backup of a database includes issuing a request to a copy service requesting a snapshot of a volume having the database, and identifying a writer of the database that should participate in creating the snapshot. From the snapshot, changes to the database since a last backup of the database and log files associated with the database that include data not yet committed to the database, are transmitted to a backup storage unit.
US10146630B1
Embodiments are directed to a method of performing incremental block based backups for volume and sub-file level backups by providing a change block tracking driver component, maintaining a context of the change block tracking driver as a driver context using a single bitmap that represents the volume being tracked, and maintaining the bitmap as the only element to track changes across the volume backups and multiple application backups involving different sub-file level backups.
US10146627B2
Embodiments of the inventive concept include computer-implemented method for shadowing one or more boot images of a mobile device. The technique can include duplicating boot images to shadow partitions in a user area of a non-volatile memory device such as a flash memory. The technique can include detecting boot image corruption, and causing a mobile device to boot from the shadow partitions. The technique can include dynamically shadowing and releasing blocks used by the shadow partitions. The technique can include boot failure recovery and bad image preservation through firmware flash translation layer (FTL) logical to physical mapping updates. Boot image corruption failures can be recovered from and/or debugged using the shadow partitions.
US10146612B1
A server that monitors errors experienced by disk drives is disclosed. The server comprises an application stored in a memory; when executed by a processor sends a request to disk drives for a count of errors experienced by the disk drives. The application sends the request at a pre-defined time period. The application sends requests at multiple time periods. The application records the count of errors experienced by the disk drives, wherein the application records previous errors that have occurred on the disk drives over multiple time periods. The application determines an acceleration of errors experienced by the disk drives, wherein an acceleration of errors is a rate of change of the count of errors per the pre-defined time period. The application determines the acceleration of errors experienced by the disk drives. The application initiates corrective actions for at least one of the disk drives.
US10146607B2
The techniques described herein provides troubleshooting, monitoring, reporting and dynamic adjustments and virtualization to management of application delivery. A system can be completely external to an application delivery data path, or can be highly compatible for integration to the application delivery path. Entities can be billed on a per user, per application, per usage, or any combination of consumption-based billing.
US10146606B2
An information handling system includes a network interface device coupled to a network, a memory including first code to instantiate an operating system including an exception handler and second code to instantiate an exception handler interface and a UNDI module, and a processor to execute the first code and the second code. The network interface device is responsive to a Universal Network Device Interface (UNDI) command. The operating system detects an exception and invokes the exception handler to write a stack frame associated with the exception to the memory in response to detecting the exception. The exception handler interface determines that the stack frame has been written in the memory and directs the UNDI module to provide the UNDI command to the network interface device to communicate the stack frame to the network.
US10146605B2
A system for bug discovery using event reports comprises an interface and a processor. The interface is configured to receive symptom data extracted from event reports from a user system. The symptom data is stored in a symptom database. The symptom data comprises one or more symptoms each with a corresponding symptom occurrence time. The processor is configured to compose one or more SQL queries using one or more bug definitions and determine an existence of one or more bugs of the user system based at least in part on a result of querying the symptom database using the one or more SQL queries.
US10146603B2
A method of tracking repeated performance problems in a machine is disclosed. The method comprises storing the faults in a computer memory, and assigning a classification value to the machine based on the frequency and number of the faults. Based on the classification value of the cash handing device it is determined whether the cash handing device needs to be serviced. The faults can be related to one of the hardware, the cash reject rate, image handling, crash rate, user claim rate, and check handling accuracy of the machine.
US10146602B2
A host data processing system provides a virtual operating environment for a guest data processing system. A transaction is initiated for translation of a guest system memory address to a host system physical address in response to a transaction request from a device overseen by a guest system. For a stalled transaction incurring an error, the following are performed: (i) storing identification information relating to that transaction including data identifying the requesting device; (ii) providing translation error condition information to the overseeing guest system; and (iii) deferring handling of the stalled transaction until a subsequent command is received from that guest system. Initiation of a closure process for a guest system initiates cancellation of certain stalled transactions.
US10146598B1
Technology for configuring a software job is described. An aspect of the technology involves receiving a software job including a plurality of events, each event including a request for processing, assigning the events to respective executors by matching the events with executor profiles, so that for each event the assigned executor is designated to perform the processing for the event, and selecting automatically an alternative executor to perform the processing for an event when the executor originally designated to perform the processing does not complete the processing.
US10146593B2
Various embodiments are generally directed to decentralized load balancing in a host cluster utilized to coordinate performance of processing tasks in a workload, such as via service agents and/or host instances included in the host cluster, for instance. Some embodiments are particularly directed to a set of service agents on one or more host instances that utilize a shared cache to coordinate among themselves to automatically balance a workload without a centralized controller or a centralized load balancer. In one or more embodiments, a set of service agents may automatically and cooperatively balance a workload among themselves using the shared cache.
US10146592B2
The technology disclosed relates to managing resource allocation to task sequences in a stream processing framework. In particular, it relates to operating a computing grid that includes machine resources, with heterogeneous containers defined over whole machines and some containers including multiple machines. It also includes initially allocating multiple machines to a first container, initially allocating first set of stateful task sequences to the first container, running the first set of stateful task sequences as multiplexed units of work under control of a container-scheduler, where each unit of work for a first task sequence runs to completion on first machine resources in the first container, unless it overruns a time-out, before a next unit of work for a second task sequence runs multiplexed on the first machine resources. It further includes automatically modifying a number of machine resources and/or a number assigned task sequences to a container.
US10146579B2
A technique for enabling real-time CPU-bound in-kernel workloads to run infinite loops while keeping read-copy update (RCU) grace periods finite. In an embodiment, a per-CPU indicator may be set to indicate that a CPU running the CPU-bound in-kernel workload has not reported an RCU quiescent state within a defined time. A function may be invoked from within the workload that causes an RCU quiescent state to be reported on behalf of the CPU if the per-CPU indicator is set. If the RCU quiescent state is not reported within a longer defined time, the CPU may be rescheduled.
US10146574B1
A method, of scheduling storage commands for processing on a virtual machine (VM) operating on a computing device includes (a) intercepting, by a front end storage scheduler module running on the VM, a set of storage commands each of which is directed at one of a plurality of virtual disks assigned to the VM, the plurality of virtual disks sharing underlying storage, (b) queueing the intercepted storage commands for each virtual disk into a respective front-end queue for each virtual disk, and (c) selectively dequeueing storage commands from the front-end queues onto their respective virtual disks in a manner that prioritizes certain virtual disks over others, wherein the selectively dequeueing is performed in a different order than the queueing. An apparatus, system, and computer program product for performing a similar method are also provided.
US10146566B2
Disclosed are techniques for providing a platform that allows a user to remotely establish a connection with a virtual machine operating on a server farm In a typical scenario, when a user requests for a connection to access third party plug-in applications, the application program interface may interact with the session broker process to identify sessions or suitable servers to which the user can be connected. The user may access the third party plug-in applications through the identified sessions or suitable servers.
US10146560B2
Embodiments of the present application provides methods and apparatus capable of recording operation/display events on a mobile device used to fulfill a service request entered via a user interface of the mobile device. A recorded sequence of operation/display events is used to build a script file, which is associated with the service request. When the same or similar service request is received again, the script file associated with the service request is retrieved for execution by the mobile device to automatically brings up a series of operation/display events so that a user of the mobile device does not need to manually navigate through the sequence of operation/display events again in order to fulfill the service request.
US10146556B2
A system, method, and computer-readable medium are disclosed for a boot mapping system. More specifically, in certain embodiments, BIOS of an information handling system includes a boot mapping system which allows the information handling system to boot up regardless of a boot order change in a network mode of operation or a BIOS boot order change. Additionally, in certain embodiments, the boot mapping system further includes a service location protocol (SLP) which locates operating system images based on the type of network protocol selected for deployment.
US10146555B2
Systems and methods for utilizing a defect map to configure an automata processor in order to avoid defects when configuring the automata processor. A system includes automata processor having a state machine lattice. The system also includes a non-volatile memory having a defect map stored thereon and indicating logical defects found on the automata processor. By including the defect map, a compiler accesses the defect map to map out defects in the automata processor during configuring to avoid such defects.
US10146551B2
Systems and methods for initializing and reconfiguring replacement motherboards are described. In some embodiments, an Information Handling System (IHS) may include: a motherboard, a processor mounted on the motherboard, and a Basic Input/Output System (BIOS) mounted on the motherboard and coupled to the processor, the BIOS having program instructions stored thereon that, upon execution by the processor, cause the IHS to: determine, while operating in a service mode, whether prefill data is available in a memory device distinct from any component mounted on the motherboard, where the prefill data is usable by the BIOS to automatically fill out at least a portion of a service menu provided by the BIOS; validate the prefill data; and in response to the validated, prefill data having changed since a previous booting of the IHS, store updated prefill data in the memory device.
US10146545B2
Embodiments related to fetching instructions and alternate versions achieving the same functionality as the instructions from an instruction cache included in a microprocessor are provided. In one example, a method is provided, comprising, at an example microprocessor, fetching an instruction from an instruction cache. The example method also includes hashing an address for the instruction to determine whether an alternate version of the instruction which achieves the same functionality as the instruction exists. The example method further includes, if hashing results in a determination that such an alternate version exists, aborting fetching of the instruction and retrieving and executing the alternate version.
US10146542B2
Methods and apparatuses relating to converting encoding formats are described. In one embodiment, a hardware processor includes a decode circuit to decode an instruction comprising a state operand, a source vector operand, a destination vector operand, and a control operand, and an execution circuit to execute the instruction to convert elements from the source vector operand in a first encoding format to a second encoding format, store the elements in the second encoding format in the destination vector operand, store a total length of the elements in the second encoding format in the state operand, and set a stream completion indication in the control operand when the elements from the source vector operand are a last elements in a data stream.
US10146531B2
Methods and apparatuses are provided for code refactoring. The method includes acquiring a code and identifying, using processing circuitry and based on a Markov decision process model, a refactoring sequence. The refactoring sequence includes a plurality of refactoring steps to be applied to the code. Further, the method includes refactoring, by the processing circuitry, the code according to the refactoring sequence.
US10146524B1
Techniques are disclosed for reducing the time needed to deploy updated versions of an application using a deployment pipeline. To do so, a deployment manager may collect statistics reflecting how often any given stage of the deployment pipeline is completed successfully in deploying updates to the application. In cases where a current stage has a sufficient approval percentage, the deployment pipeline may begin deploying an updated version of the application into an environment specified for a subsequent stage of the deployment pipeline, before the current stage of the pipeline is complete. Provided the current stage completes successfully, the subsequent stage can be initiated by activating the pre-deployed versions of the application.
US10146521B2
A device, system and method for updating the software modules of a vehicle is provided. The device includes an interface device local to a vehicle that communicates with a remote third party location or customer service center. A database of OEM vehicle software modules is accessed by the third party, customer service center and at least one software module particular to the vehicle is provided to the interface device. The interface device is configured to program, reprogram and/or update at least one vehicle software module of the particular vehicle with the software module via the reprogramming tool.
US10146506B2
This invention is multiply-accumulate circuit supporting a load of the accumulator. During multiply-accumulate operation a partial product generator forms partial produces from the product inputs. An adder tree sums the partial product and the accumulator value. The sum is stored back in the accumulator overwriting the prior value. During load operation an input gate forces one of the product inputs to all 0's. Thus the partial product generator generates partial products corresponding to a zero product. The adder tree adds this zero product to the external load value. The sum, which corresponds to the external load value is stored back in the accumulator overwriting the prior value. A multiplexer at the side input of the adder tree selects the accumulator value for normal operation or the external load value for load operation.
US10146491B2
A printing system includes one or more of information processing apparatuses, an image forming apparatus, a storage storing pieces of job information on print jobs, and circuitry. The circuitry is configured to execute: receiving the print target data from the information processing apparatus; receiving a history of pieces of job information corresponding to user identification information corresponding to the target data from the storage; estimating, based on the history, a type of a PDL to which the target data is converted; generating PDL data by converting the target data to the PDL of which the type is estimated; transmitting the PDL data to the image forming apparatus when the estimated PDL is available for the image forming apparatus; and selecting, when the estimated PDL is not available for the image forming apparatus, a PDL available for the image forming apparatus and re-converting the print target data to the selected PDL.
US10146489B2
A multifunction peripheral (100) is connected to a terminal device (200) via a communication link, receives image data transmitted from the terminal device (200) and forms an image based on the image data. Further, the multifunction peripheral (100) detects the state of connection of the communication link and thereby detects whether or not communication with the terminal device (200) is interrupted. If interruption of communication is detected while image data transmitted from the terminal device is being received, the multifunction peripheral suspends the unfinished state of reception of image data.
US10146484B2
An information processing apparatus capable of performing a software program including a first program layer with an instruction set to be interpreted and performed by a processor and a second program layer with an instruction set compiled in advance by a unit other than the processor comprises a unit configured to transmit parameter information used for image processing from the first program layer to the second program layer, a unit configured to perform the image processing in the second program layer according to the parameter information, a display control unit configured to display an indicator for allowing a user to recognize that the image processing is in progress, and a unit configured to issue an instruction to control display of the indicator from the second program layer to the first program layer, the display control unit controls the display according to the instruction.
US10146483B2
According to one embodiment, a memory system is connectable to a host including a first memory. The memory system includes a non-volatile second memory, a volatile third memory, and a controller. The controller uses the third memory as a work memory, and executes data transfer between the host and the second memory. The controller receives a first command to change a power mode from the host. The controller transfers first data to the first memory and transfers second data to the second memory in response to the receipt of the first command. The controller transmits a response of completion of data transfer. The first data and the second data are included in third data. The third data is data in the third memory.
US10146479B1
A mechanism for multiple coexisting configurations support in virtual tape applications. Specifically, the introduction of various additional computer processes facilitate the introduction or modification of user specific configurations on a virtual tape solution: (i) without requiring the shutdown and re-initialization of the virtual tape solution; and (ii) without compromising the performance of computing resources allocated towards the implementation of other user specific configurations already existing on the virtual tape solution.
US10146471B1
Offloaded data protection based on virtual machine snapshots is described. A system identifies a virtual machine associated with a backup application. The system identifies a storage identifier associated with a virtual machine storage management tool and the virtual machine. The system creates a snapshot of the virtual machine and an identifier of the snapshot by prompting a storage array, which is associated with the virtual machine storage management tool, with the storage identifier. The system mounts the snapshot to a proxy server. The system creates a backup based on the snapshot by prompting the backup application with the identifier of the snapshot.
US10146468B2
An addressless merge command includes an identifier of an item of data, and a reference value, but no address. A first part of the item is stored in a first place. A second part is stored in a second place. To move the first part so that the first and second parts are merged, the command is sent across a bus to a device. The device translates the identifier into a first address ADR1, and uses ADR1 to read the first part. Stored in or with the first part is a second address ADR2 indicating where the second part is stored. The device extracts ADR2, and uses ADR1 and ADR2 to issue bus commands. Each bus command causes a piece of the first part to be moved. When the entire first part has been moved, the device returns the reference value to indicate that the merge command has been completed.
US10146467B1
Archival load balancing is described. A selection of data stored on a source hard disk drive is received via a user interface. The selection of data stored on the source hard disk drive is associated with data migrated from the source hard disk drive to a backend storage device. Registry keys associated with the selection of data are copied from the source hard disk drive to a target server. Information in the registry keys on the target server is modified to be compatible with settings on the target server. The selection of data is copied from the source hard disk drive to a target hard disk drive on the target server. The selection of data stored on the target hard disk drive is associated with the data migrated to the back end storage device.
US10146465B1
Systems and methods for automatically provisioning and de-provisioning software defined storage (SDS) systems. Characteristics such as IPOS, capacity, and throughput of the SDS systems are monitored. Capacity or storage is added or removed from the SDS systems based on the relationships between the characteristics of the SDS systems with respect to upper and lower thresholds.
US10146464B2
A data processing system having a PUF and method for providing multiple enrollments, or instantiations, of the PUF are provided. A PUF segment includes a plurality of SRAM cells on an integrated circuit. A PUF response from the PUF segment is used to create a first activation code and a first PUF key. A second PUF key may be created from the PUF response. Initially, during a second enrollment, the PUF response is combined with the first activation code to reproduce a codeword. The first secret string is reconstructed by encoding the codeword. The codeword is combined with the first activation code to reproduce the PUF response. Inverse anti-aging is applied to the PUF response. Then a second secret string is generated using a random number generator (RNG). The second secret string is encoded to produce a new codeword. The new codeword is combined with the recovered PUF response to create a second activation code. The second activation coded is hashed with the second secret string to provide a second PUF key.
US10146460B1
A memory system includes an interface and storage circuitry. The interface is configured to communicate with a plurality of memory cells that store data by setting the memory cells to analog voltages representative of respective storage values. The storage circuitry is configured to receive data for storage, to measure a temperature at a time of programming the received data, and, to program the received data to the memory cells using a first programming scheme when the measured temperature falls within a predefined normal temperature range, and otherwise to program the received data to the memory cells using a second programming scheme having a lower net storage utilization than the first programming scheme.
US10146450B1
A technique is directed to managing a pool of slices provided by data storage equipment. The technique involves monitoring usage of the pool of slices provided by the data storage equipment, and generating an estimate based on the monitored usage of the pool of slices. The estimate identifies when a slice usage level of the pool of slices will reach a predefined usage level (e.g., the number of days remaining before the pool will become completely full, 90% full, 80% full, etc.). The technique further involves, in response to the estimate reaching a predefined threshold (e.g., when the number of days remaining is 5 days, 4 days, 3 days, etc.), performing a remedial activity to prevent full consumption of the pool of slices.
US10146443B2
A memory controller includes a scheduler that decides a processing order of a plurality of requests provided from an external device with reference to a timing parameter value for each of the requests; and a timing control circuit that adjusts the timing parameter value according to a corresponding address to access a memory device, the corresponding address being used to process a corresponding request of the plurality of requests.
US10146433B2
A method for initializing a NAND flash serving as a booting device includes the following steps. A NAND flash storing a boot table being identified by an identification (ID) of the NAND flash is provided. A current block of the NAND flash is searched to read the boot table. Configuration information of the boot table is read to initialize the NAND flash.
US10146426B2
In accordance with an example embodiment of the present invention, a method for proximity based input is provided, comprising: receiving information on presence of an object in close proximity to a touch screen surface, detecting a display element currently associated with the object, the display element being visualized to be displaced from the screen surface level in the z-direction substantially perpendicular to the screen surface, and adapting the display element on the basis of distance between object and the screen, wherein the display element is visualized to locate substantially at the touch screen surface level in response to detecting the object to touch the touch screen surface.
US10146424B2
A touch screen may emphasize the display of objects near the tip of a user input instrument located near the surface of the touch screen but not touching the touch screen. The objects may consist of words and the emphasis may consist of highlighting. The user input instrument may be a finger of a user or an electronic pen. As the user input instrument is moved, the objects emphasized may change. A user may select objects on a touch screen by entering into object-selection mode and moving the user input instrument along the surface of the touch screen. An initial touch of the user input instrument to the surface of the touch screen may select a nearest object or objects. As the user input instrument is moved along the surface, the selection of objects may change based upon the movement.
US10146423B1
A method for generating an adaptive user interface may include, generating a graphical user interface for presentation to a user at an automated banking machine that includes a touch screen display and a currency note dispenser. The automated banking machine may include a sensor that senses information indicating a physical disposition of the user relative to the automated banking machine. The method may include adjusting the placement of the menu options on the touch screen display based on the information regarding the physical disposition of the user relative to the automated banking machine.
US10146419B2
A visual design system implementable on a computing device, the device having a processor and a memory. The system includes a dynamic layout editor to edit a visual creation with absolute positioning including at least one page having a least two components during an editing session; a page analyzer to perform at least geometrical analysis on the at least two components and to divide the page into at least one section according to the analysis; a UI subsystem to generate and present each at least one section as a virtual container and to generate at least one section manipulator tool to enable a user to perform manipulation on the at least one section; and a change executor to regenerate the page based on the manipulation to the at least one section and at least according to dynamic layout rules.
US10146409B2
User interface (UI) manipulations may be performed by eliminating noticeable process boundaries associated with or generated by different applications. The techniques herein describe dynamically splitting manipulations across multiple pieces of content without regard to various types and/or states of the user interface manipulations and/or without regard to whether the multiple pieces of content are associated with different individual processes. In at least one example, the techniques described herein enable quick, responsive, and seamless UI manipulations with complex configurations of content on a UI and/or with multiple pieces of content associated with more than one application. Additionally, the techniques described herein further enable content on a UI to “stick” to the user input manipulation or move with the user input manipulation such that the content appears to stay directly in contact with the user input manipulation.
US10146406B2
A meta guiding mode can be implemented on a computing device to alter or disable touch inputs that the computing device otherwise recognizes as input.
US10146401B2
According to one of aspects, an electronic device includes a display and a controller. The display displays a first screen including a plurality of icons each corresponding to an application. When detecting a screen-adding operation for adding a new screen while an icon of the plurality of icons is selected in response to a selecting operation performed on the first screen, the controller creates a second screen including the selected icon.
US10146396B2
Mechanisms are provided for a graphical user interface tool for system-wide topology and performance monitoring with per-partition views. A graphical user interface application presents a consolidated view of physical and logical information based on the received performance data. The mechanisms provide real-time performance and utilization information in a visual format relative to the physical components in a topographical layout. The user may drill down to lower levels to view more detailed performance and utilization information.
US10146385B2
A touch substrate, a display device and a detection method of a touch electrode pattern are disclosed. The touch substrate including a plurality of touch electrodes sequentially arranged along a first direction, in which each touch electrode is extended along a second direction; each touch electrode has a head end, a middle end and a tail end; the middle end is close to a first edge of the touch substrate, and the head end and the tail end are close to a second edge of the touch substrate and are respectively connected with contact pads; and the contact pads connected with the head end and the tail end of the same touch electrode are different. The touch substrate can avoid the waste of module materials.
US10146382B2
An assembly has an array of first electrodes distributed across an active area of the touchscreen assembly such that the density of first electrodes increases in a first direction across the touchscreen. An array of second electrodes is distributed across an active area of the touchscreen assembly such that the density of second electrodes decreases in the first direction across the touchscreen.
US10146371B2
A method for touch detection includes identifying a high-pass filtered sequence from a plurality of sensor measurements, accumulating a number of samples from a first high-pass filtered sequence into an accumulated value, comparing the first accumulated value against a threshold of accumulated values, and, based upon a determination whether the accumulated value is greater than the threshold of accumulated values, identify whether the sensor has been approached.
US10146369B2
An electronic apparatus with a touch panel including a host controller, an interface unit, and a touch panel control unit is provided. The host controller is used to control an electronic apparatus implemented with the host controller. The touch panel control unit is coupled to the host controller through the interface unit. The host controller transmits an updating information to the touch panel control unit with a format of the interface unit, in which the updating data is used to update the touch panel control unit. The touch panel control unit decodes the updating data to accordingly update.
US10146363B2
An alternating current (AC) drive signal having a first frequency and a high logic level at a boosted supply voltage is applied to drive a capacitive sensing line of a capacitive touch panel. The boosted supply voltage is generated by boosting an input voltage. The voltage boosting is effectuate by a charge pump circuit operating synchronous to assertion of the AC drive signal with a charge transfer time that is adaptable to different capacitive load conditions.
US10146357B2
A method for a driver assistance system of a vehicle. The driver assistance system can control the vehicle at least partially automatic by an autopilot function. In the method, an activation state of the autopilot function is determined and a display device of the driver assistance system is activated depending on the activation state of the autopilot function.
US10146343B2
The purpose is to provide a terminal device that can be operated by a virtual operation key which is easy to use. The terminal device according to an aspect of the present invention comprises a display unit for displaying a virtual operation key, a touch panel for detecting contact by an inputting object on the virtual operation key, and a control unit for assessing whether a drag operation by the inputting object has been carried out on the basis of contact with the virtual operation key by the inputting object detected via the touch panel and controlling the display position of the virtual operation key, wherein the control unit modifies the display position of the virtual operation key in accordance with the contact position of the inputting object if the contact position of the inputting object exceeds a display area of the virtual operation key due to the drag operation.
US10146325B2
An apparatus and method for arranging a keypad in a wireless terminal, and more particularly, to an apparatus and method for arranging a keypad in a wireless terminal to conveniently perform a key input in the wireless terminal, the apparatus including: a display unit for displaying the keypad in at least one of a right and left side on a screen of the display unit in a horizontal mode of the wireless terminal; and a controller for controlling the display unit to display the keypad in the right and/or left side on the screen of the display unit in the horizontal mode of the wireless terminal.
US10146321B1
The systems described herein integrate virtual keyboard technology and gesture-based controllers into a single module or into a laptop or other mobile computing device in order to make laptops, personal computers, and other mobile computing devices more convenient, more versatile, and with less clutter or fewer peripheral devices than is typically the case with a traditional combination of a physical keyboard with a mouse, touchpad, or track ball. Users of the embodiments disclosed herein will be able to enter data or commands merely by typing or making hand gestures or hand movements, which will lead to greater flexibility, creativity, and productivity, while reducing user ennui and fatigue.
US10146320B2
An aircraft is provided that includes a passenger service unit for a passenger seated in a seat in its cabin. The aircraft includes a camera configured to acquire an image of the passenger, and a control module configured to at least receive the image of the passenger. The control module is configured to receive non-tactile gesture preference data and dominant hand data, and access a non-tactile gesture data store that includes a plurality of images of non-tactile hand signals or non-tactile hand gestures. Based on the foregoing, the control module is configured to generate non-tactile gesture data in accordance with and indicative of a non-tactile hand signal or a non-tactile gesture made by the passenger. And the control module is configured to control one or more cabin systems including in at least one instance the passenger service unit based on the non-tactile gesture data.
US10146315B2
An apparatus comprising: an input module configured to determine an input characteristic; a signal generator configured to generate a signal dependent on the input characteristic; and an output module configured to provide the signal to one or more separate apparatus, wherein the signal is configured to generate a tactile output.
US10146311B2
Embodiments hereof relate a system that includes a processor and a haptic peripheral with a haptic output device. The processor is configured to receive an audio file, or a haptic file generated from the audio file, that includes a first channel having a first set of control parameters to generate a first haptic effect and a second channel having a second set of control parameters to generate a second haptic effect and to output a control signal that includes the first and second sets of control parameters for the haptic effect. The haptic output device is configured to receive the control signal from the processor and to output the haptic effect to the haptic peripheral. In an embodiment, the haptic output device is coupled to a bi-directional trigger and the control parameters move the trigger in opposing directions. In another embodiment, the control parameters generate different timelines of haptic effects to a user input element.
US10146303B2
A method to provide visual feedback for gazed-based user-interface navigation includes presenting, on a display, a first image representing a digital object available for user interaction, recognizing a user gaze axis, and computing a point of intersection of the user gaze axis through the first image. An offset distance between the point of intersection and a reference position of the first image then recognized, and a second image is presented on the display. The second image is presented displaced from the point of intersection by an amount dependent on the offset distance.
US10146299B2
A user device receives an image stream from the user side of the user device and an image stream from a target side of the user device. The user device acquires a coordinate system for the user, acquires its own coordinate system, and relates the two coordinate systems to a global coordinate system. The user device then determines whether the user has moved and/or whether the user device has moved. Movement of the user and/or the user device is used as input modalities to control the user's interactions in the augmented reality environment.
US10146298B2
Enhanced handheld screen-sensing pointing, in which a handheld device captures a camera image of one or more fiducials rendered by a display device, and a position or an angle of the one or more fiducials in the captured camera image is determined. A position on the display device that the handheld device is aimed towards is determined based at least on the determined position or angle of the one or more fiducials in the camera image, and an application is controlled based on the determined position on the display device.
US10146296B2
An integrated circuit is provided with an independent power framework for a first subsystem and another independent power framework for a processor subsystem that receives messages from the first subsystem.
US10146283B2
In one embodiment, a processor includes a plurality of domains each to operate at an independently controllable voltage and frequency, a plurality of linear regulators each to receive a first voltage from an off-chip source and controllable to provide a regulated voltage to at least one of the plurality of domains, and a plurality of selectors each coupled to one of the domains, where each selector is configured to provide a regulated voltage from one of the linear regulators or a bypass voltage to a corresponding domain. Other embodiments are described and claimed.
US10146269B2
Examples disclosed herein provide a computing device. One example computing device includes a base member, a support member connected to the base member via a shaft at a first end of the support member, and a display member connected at a second end of the support member opposite the first end. The computing device includes magnetic members disposed within the display member, wherein the magnetic members disposed within the display member is to magnetically couple with magnetic members disposed within the support member to operate the computing device in a first operation mode or a second operation mode. The computing device includes a mechanism disposed within the support member and connected to the base member via the shaft. The mechanism includes a feature to overcome the magnetic coupling between the magnetic members when the computing device is to change between the first and second operation modes.
US10146268B2
A hinge is disclosed. The hinge includes a first portion and a second portion. The hinge includes a first link having a first pivot and a second pivot. The first pivot is connected to the first portion. The first link is biased about the first pivot of the first link toward a first position. The hinge includes a second link having a first pivot and a second pivot. The first pivot connected to the second portion. The second pivot of the second link connected to the second pivot of the first link. The second link biased about the first pivot of the second link toward the first position. The second pivot of the first link and the second pivot of the second link defining a hinge pivot. Methods of transitioning a computing device are disclosed.
US10146264B2
A security apparatus for securing a portable electronic device to an immovable object includes a locking head having a base and a plurality of engagement portions extending from the base. The plurality of engagement portions is configured to be inserted into an aperture of the portable electronic device. The locking head also includes a linear portion positioned between the plurality of engagement portions and extending from the base. The linear portion is twistable about its length to move the plurality of engagement portions radially outward. The security apparatus further includes a security device attached to the locking head and configured to engage the immovable object.
US10146254B2
The present invention relates to devices used to shade the screens of cell phones and tablet computers from bright sunlight. More specifically the present invention relates to a shade element attached around the body of a cell phone or tablet computer for protecting the screen of the cell phone or tablet computer from bright sunlight when the device is held and used by a user.
US10146247B2
A reaction force output device is provided with: a drive unit that drives a drive member to output a force in a direction opposite to an operating direction to an operated element operated by an operator; and a control unit that determines whether or not a space is formed between the operated element and the drive member, and if it is determined that the space is formed, controls the drive unit to output a greater driving force than when it is determined that the space is not formed.
US10146240B1
A voltage regulator having a pre-regulator circuit is disclosed. A low dropout (LDO) voltage regulator includes an amplifier circuit, a current buffer circuit, and a pre-regulator circuit. The current buffer circuit includes a transistor having a gate terminal coupled to the amplifier output. The current buffer provides a current based at least in part on the output signal generated by the amplifier. The pre-regulator circuit is coupled to provide a dynamic supply voltage to the current buffer. They dynamic supply voltage depends at least in part on a fixed supply voltage provided thereto, as well as the output voltage provided by the LDO voltage regulator.
US10146236B2
A heating, ventilation, and air conditioning (HVAC) system includes a control unit, a central controller coupled to the control unit via a first two-conductor wireline structure, and a plurality of HVAC system components coupled to the central controller via a second two-conductor wireline structure. The central controller is configured to receive, via the first two-conductor wireline structure, control information corresponding to an enclosed space, generate control data, and transmit, via the first two-conductor wireline structure, the control data to at least one of the plurality of HVAC system components to regulate operations thereof.
US10146234B2
A thermostatic valve, which includes a main body portion, a cavity formed as part of a main body portion, and an inner wall integrally formed with the main body portion adjacent the cavity. A circumferential flange is integrally formed with the inner wall, such that the circumferential flange surrounds a valve cavity. A valve member is attached to the inner wall disposed in the valve cavity, and a flow aperture is formed as part of the inner wall. Fluid flows through the flow aperture into the valve cavity, and when the pressure in the valve cavity is above a predetermined value, the valve member contacts the inner wall, preventing fluid from flowing through the flow aperture.
US10146232B2
A data collection module for capturing dispense event information from an associated fluid dispenser is provided. In some embodiments, the data collection module includes a detection instrument for detecting activation of a dispenser actuator of the fluid dispenser and for generating an output indicating activation of the dispenser actuator. In some embodiments, the data collection module includes digital electronic circuitry for communicating the data to an associated external network.
US10146230B2
A technique enables easy recapture of an unmanned aerial vehicle (UAV) that an optical device has lost sight of. A control device controls tracking of the unmanned aerial vehicle. When failing to capture the unmanned aerial vehicle during tracking of the unmanned aerial vehicle, the control device controls processing to transmit a lost signal and controls processing to search for the unmanned aerial vehicle by targeting an airspace containing a location at which the unmanned aerial vehicle was previously captured by the control device.
US10146222B2
Described embodiments include a self-propelled vehicle, method, and system. The self-propelled vehicle includes an autonomous driving system configured to dynamically determine maneuvers operating the vehicle along a route in an automated mode without continuous input from a human driver. The vehicle includes an input device configured to receive a real-time request for a specific dynamic maneuver by the vehicle operating along the route from the human driver. The vehicle includes a decision circuit configured to select a real-time dynamic maneuver by arbitrating between (i) the received real-time request for the specific dynamic maneuver from the human driver and (ii) a real-time determination relative to the specific dynamic maneuver received from the autonomous driving system. The vehicle includes an implementation circuit configured to output the selected real-time dynamic maneuver to an operations system of the vehicle.
US10146212B2
A machine tool feed drive design system is provided, which may include a component database, a detection module, a load condition estimation module and a calculation module. The component database may store the specification data of a plurality of feed drive components. The detection module may detect a plurality of operation signals from a machine tool during a period of time when the machine tool had been executing a machining process to a workpiece. The load condition estimation module may calculate a plurality of actual load conditions according to the operation signals and a device specification parameter of a feed drive of the machine tool. The calculation module may select at least one component combination from the feed drive components according to the actual load conditions and the specification data of the feed drive components to serve as an optimized feed drive specification.
US10146211B2
A variable magnetization machine controller including a hysteresis control component configured to receive an ideal magnetization state signal, output an actual magnetization signal based on the ideal magnetization state signal for control of a variable magnetization machine, and modify the actual magnetization state signal in accordance with an error value between the ideal magnetization state signal and the actual magnetization state signal.
US10146207B2
A numerical control apparatus includes an API interface section that accepts invocation of an API function, an API control section that executes the process of the API function based on the invocation of the API function, and processing period estimation means for estimating if the execution of the API function is completed in a predetermined period, and the API control section does not execute but terminates the process of the API function when the processing period estimation means estimates that the execution of the API function will not be completed in the predetermined period.
US10146205B2
A method which allows an operator to quickly form a clear picture with regard to the positioning accuracy of a machine part that is displaceable along an axis by means a drive controlled by a controller includes specifying with the controller nominal position values of the machine part in relation to a single axis, wherein the nominal position values are defined by a sine function; displacing the machine part with respect to the single axis in accordance with the nominal position values; determining with a measuring device actual position values of the machine part in relation to the single axis; and visualizing the actual position values of the machine part in relation to the single axis graphically in a circular representation.
US10146202B2
A method of performing automated operations on a workpiece by at least one autonomous device is provided. The method includes sensing, by a first of the at least one autonomous devices, a guidance pattern positioned on the workpiece along a first path. The method also includes traversing, by the first autonomous device, along the first path by following the sensed guidance pattern, to a first path location that is within a detection distance of a first precision target indicator positioned on the workpiece.
US10146201B2
A numerical control apparatus which enables a numerical control apparatus for a machine tool suitable for executing a particular machining program to selectively execute the machining program. The numerical control apparatus includes a storage that stores unique information; a receiving part that receives a machining program including incidental information; a determination part that checks the incidental information included in the machining program received by the receiving part with the unique information stored in the storage, and determines whether information matching the unique information is included in the incidental information; and a machine controller that executes the machining program received by the receiving part to control the machine tool only when it is determined that information matching the unique information is included in the incidental information.
US10146194B2
An augmented reality (AR) system, device, and method for reducing energy usage by monitoring and determining optimal control settings for conditions within a building. Sensors embedded in AR devices worn by workers performing job duties are utilized to detect and measure physical conditions such as visible light intensity and air temperature. Location, time/date, and worker occupancy data is also provided to the AR system. A time- and location-based data profile of environmental conditions within the building is created and regularly updated to track changes in environmental conditions over time. Algorithms running on a processor calculate and provide optimal control settings to building lighting and climate control systems. Optimal control settings take into account energy reduction goals, worker comfort, and regulatory compliance. The system utilizes the data profile to determine initial, reduced-energy control settings based on expected physical conditions within the building.
US10146193B2
The present disclosure relates to a method for primary frequency regulation of an electric network based on large building air conditioning loads cluster. The method includes the use of a two layer control structure with a central coordinating layer and a local control layer. Each local controller performs a thermal model parameter identification and a local air conditioning autonomous control, and uploads local information to the central controller at the end of each communication interval tgap, the central controller broadcasts coordinating information to each local controller. Based on the coordinating information sent from the central controller, each local controller determines whether a power deviation is beyond an action dead zone at the beginning of each action period tact, if beyond, then perform a frequency regulation control action, else, perform no action and estimate operation states of all the air conditionings at the beginning of the next action period.
US10146191B2
A system is provided for controlling a first switch terminal of a building occupied by one or more building occupants. The system includes a plurality of switch terminals at the building. A first computer system is coupled to the first switch terminal or equivalent of the building at a first location of the building. The first computer system runs on at least one platform. A first plurality of sensors is coupled to the first switch terminal and the first computer system. At least a portion of the sensors provide signal data to the first computer system. The first computer system produces a command or data output that relates to at least one of: a command output for a local control system, a command output for a different system, a data output for a different system, a command output for a non-local device or a data output that is a non-local device. A second switch terminal includes a second plurality of sensors coupled to a second computer system. The system is configured to provide information of how at least a portion of the first plurality of sensors relate to the second plurality of sensors.
US10146188B2
A smart watch includes a case, a display device configured to present a user interface disposed in substantially all of a face of the case, a bezel around the display device configured to be rotated to select a mode of operation of the smart watch, and an analog first watch arm and an analog second watch arm disposed over the display, the second watch arm coaxial with the first watch arm. In a first mode of operation, the user interface presents a watch dial and control the first and second watch arms indicate a time of day first and second watch arms to indicate a time of day. In a second mode of operation, the user interface presents a dial and control the first and second watch arms form a pointer, the pointer configured to indicate a reading on the dial.
US10146183B2
An optical device including a hologram recording medium that can reproduce an image of a reference member and an irradiation unit that emits a coherent light beam to the optical device. The irradiation unit includes a light source for emitting a coherent light beam and a scanning device capable of adjusting a reflection angle of the coherent light beam emitted from the light source and that makes a reflected coherent light beam scan the hologram recording medium. The light source has light sources for emitting coherent light beams having different wavelength ranges. The hologram recording medium has a plurality of recording areas to be scanned with a plurality of coherent light beams reflected by the scanning device, respectively. Each of the plurality of recording areas has an interference fringe that diffracts a coherent light beam of the corresponding wavelength range.
US10146181B2
Provided are an apparatus and a method for displaying a holographic three-dimensional (3D) image. The apparatus includes an image segmenter configured to segment an original image into a plurality of segments, and a calculator configured to calculate diffraction fringe pattern information for displaying each of the plurality of segments as a 3D holographic image. The image segmenter adjusts the number of the plurality of segments.
US10146165B2
An image forming apparatus is operable in a first mode in which a control unit is in a rest state and a second mode in which electric power is supplied to the control unit. The image forming apparatus changes the mode of the operation to the second mode of an operation in response to change of detection of a detecting portion from presence of the sheet on a manual feeding tray to absence thereof during execution of the operation in the first mode with a pressing mechanism being in the second position, and then in response to receipt of input of a predetermined instruction about an image forming operation by a receiving portion in the second mode, the control unit controls the moving mechanism so that the pressing mechanism moves from the low pressure position to a nip-forming position.
US10146164B2
It is determined whether a performing condition for first welding detection is satisfied. If the performing condition for the first welding detection is satisfied, the first welding detection is performed. On the other hand, if the performing condition for the first welding detection is not satisfied, the first welding detection is skipped. The performing condition for the first welding detection is that second welding detection has detected welding of a relay. The first welding detection is performed before image formation is performed. The second welding detection is performed after image formation has ended.
US10146163B2
When a mechanism enters a first state, an intermediate transfer member separates from a second photosensitive member. When the mechanism enters a second state, the intermediate transfer member contacts the second photosensitive member. When a first monochrome image is formed on a sheet of a first type by using toner of a first color, the mechanism enters the first state. When a second monochrome image is formed on a sheet of a second type by using toner of the first color, the mechanism enters the second state. A rotation speed of the second photosensitive member for forming the second monochrome image on the sheet of the second type is controlled to a predetermined rotation speed. The predetermined rotation speed is slower than a rotation speed of the second photosensitive member for forming the second image.
US10146161B2
An improved fuser includes a heater using a solid-state heater element with high frequency field propagation to provide an effective increase in the energy conduction through the fusing belt allowing increased throughput rates over conventional conduction systems. The system employs a solid-state heater with internal circuitry to drive a high frequency field though the fuser belt to the elastomeric top coat, which is laced with high frequency receptors. The belt is then heated directly on the surface bypassing thermal conduction interfaces and is also simultaneously heated by conduction from the waste energy of the heater element.
US10146157B2
A developing apparatus includes a rotatable developer bearing member, a first conveyance screw in a first chamber to convey the developer, and a second conveyance screw in a second chamber to convey the developer. The second conveyance screw includes a first screw portion facing a communication portion between the first and second chambers, a second screw portion downstream of the first screw portion, and a third screw portion downstream of the first screw portion and upstream of the second screw portion and facing the second communication portion. The first screw portion includes a first blade portion formed spirally around a rotation shaft of the second conveyance screw, the second screw portion has a second blade portion formed spirally around the rotation shaft of the second conveyance screw, and the third screw portion comprises no blade portion formed spirally around the rotation shaft of the second conveyance screw.
US10146156B2
An image forming apparatus includes a photosensitive drum, a developing device including a developing roller and a developing frame including a toner receiving port, and a toner cartridge including a toner accommodation part and a conveyance device configured to convey toner from the toner accommodation part toward the developing device. The conveyance device includes a coupling tube and a shutter. The coupling tube includes a toner supply port faceable the toner receiving port, is coupleable to the developing device and is movable with respect to the toner accommodation part at a state where the coupling tube is coupled to the developing device and the toner supply port faces the toner receiving port. The shutter is movable between an opening position at which the toner supply port is opened with the coupling tube being coupled to the developing device and a closed position.
US10146148B2
An image forming apparatus includes a plurality of image forming units configured to form images, an image bearing member, a detection unit configured to detect a pattern image formed on the image bearing member, the pattern image being used for detecting a color misregistration, a controller configured to control the plurality of image forming units to form a plurality of first pattern images, each having a different color, and control the detection unit to detect the color misregistration, and a storage unit configured to store data on the color misregistration, wherein the controller corrects an image forming position based on the stored data, and wherein in a case where an error is detected in the data, the controller controls the plurality of image forming units to form a plurality of second pattern images, different form the plurality of first pattern images, before the plurality of first pattern images is formed.
US10146140B2
A structure of interest is irradiated with radiation for example in the x-ray or EUV waveband, and scattered radiation is detected by a detector (306). A processor (308) calculates a property such as linewidth (CD) by simulating interaction of radiation with a structure and comparing the simulated interaction with the detected radiation. A layered structure model (600, 610) is used to represent the structure in a numerical method. The structure model defines for each layer of the structure a homogeneous background permittivity and for at least one layer a non-homogeneous contrast permittivity. The method uses Maxwell's equation in Born approximation, whereby a product of the contrast permittivity and the total field is approximated by a product of the contrast permittivity and the background field. A computation complexity is reduced by several orders of magnitude compared with known methods.
US10146138B2
A method for producing an optical element includes: providing a substrate (102), applying a layer system (103), wherein an optically effective surface (101) is formed and wherein the layer system has a layer (104) that is thermally deformable for manipulating the geometric shape of the optically effective surface, and applying a temperature field to the optical element while at least regionally heating the thermally deformable layer to above a specified operating temperature of the optical system. The thermally deformable layer is configured such that a deformation that is induced when the temperature field is applied is at least partially maintained after the optical element has cooled. Also disclosed is an optical element (400) that has an optically effective surface (401), a substrate (402), and a layer system (403) that has a reflection layer system (406), which includes a shape-memory alloy.
US10146134B2
An illumination system for a lithographic apparatus includes an array of lenses configured to receive a radiation beam and focus the beam into a plurality of sub-beams, an array of reflective elements configured to receive the sub-beams and reflect the sub-beams so as to form an illumination beam, a beam splitting device configured to split the illumination beam into a first portion and a second portion wherein the first portion is directed to be incident on a lithographic patterning device, a focusing unit configured to focus the second portion of the illumination beam onto a detection plane such that an image is formed at the detection plane and wherein the image is an image of the sub-beams in which the sub-beams do not overlap with each other and an array of detector elements configured to measure the intensity of radiation which is incident on the detection plane.
US10146131B2
Composition, method for producing patterned substrate, film and forming method thereof, and compound
A composition includes a compound including a partial structure represented by formula (1), and solvent. In the formula (1), X1 and X2 each independently represent a substituted or unsubstituted ring structure having 4 to 10 ring atoms constituted taken together with the spiro carbon atom and the carbon atoms of the aromatic ring adjacent to X1 or X2; n1 and n2 are each independently an integer of 0 to 2; and the sum of k1 and k2 are each independently an integer of 1 to 8, wherein the sum of k1 and k2 is no less than 2 and no greater than 16. The compound is preferably represented by formula (2). The sum of k1 and k2 in the formula (1) is preferably no less than 3.
US10146120B1
A rotation projector has a housing and a projection device. The housing has a casing and a mounting support. The mounting support is disposed in the casing. The projection device disposed in the casing and having a driver, a driving shaft, a drive gear, a lighting member, a gear assembly, and a film reel assembly. The driver is mounted on the mounting support. The driving shaft is driven to rotate by the driver. The drive gear is securely mounted on the driving shaft. The lighting member is mounted on the mounting support. The gear assembly is rotatably mounted on the mounting support and engages with the drive gear. The film reel assembly is mounted on the gear assembly and is disposed in front of the lighting member. A pattern projected by the projection device will be rotated.
US10146114B2
A projection display apparatus of the present disclosure includes a solid state light source discharging blue light in a first wavelength range; a wheel having a transmission part transmitting blue light and a first light-emitting body emitting light in response to irradiation with blue light; a second light-emitting body emitting light in a second wavelength range closer to the longer wavelengths than the first wavelength range is and adjacent to the first wavelength range, in response to irradiation with blue light that has passed through the transmission part; a light uniformizing element uniformizing the blue light and the light emitted from the first and second light-emitting body; a light modulation element modulating the light uniformized by the light uniformizing element; and projection unit projecting the light modulated by the light modulation element.
US10146103B2
A laser-based speed gun includes a camera module and a folded optical system including an objective lens and an eyepiece lens. The folded optical system includes first and second image redirecting elements for redirecting an image pathway from the objective lens to the eyepiece lens adjacent the camera module.
US10146101B2
A method for sequential control of a diaphragm arrangement of a camera, the arrangement comprising a diaphragm, and an integrated IR cut filter always covering at least a portion of an aperture opening of the diaphragm, comprising: initiating closing or opening of the diaphragm; detecting an amount of incident radiation when the diaphragm has an initial aperture opening; shifting the aperture opening to an intermediate aperture opening to alter the ratio between visible light and infrared radiation passing the diaphragm; detecting an amount of incident radiation following the shift; calculating a composition of visual light and infrared radiation in the scene from the detected amounts of incident radiation and a calculated ratio between visible light and infrared radiation when having the initial aperture opening and the intermediate aperture opening, respectively; and shifting the aperture opening of the diaphragm to a new position.
US10146095B2
A liquid crystal display device is provided with a thin film transistor which includes a gate electrode film that is provided in a first electrode layer located over a first insulating layer, a semiconductor film that is disposed over the gate electrode film via a second insulating layer, a drain electrode and a source electrode that are provided in a second electrode layer located over the semiconductor film and are in contact with an upper surface of the semiconductor film, and a light blocking film that is disposed under the first insulating layer. At least a part thereof overlaps the semiconductor film and the gate electrode film in a plan view. One of the drain electrode and the source electrode is connected to a gate line, and the light blocking film is electrically connected to the source electrode.
US10146079B2
According to one embodiment, a display device comprises an insulating substrate, a pixel in a display area, a scanning line extending in a first direction, a signal line extending in a second direction, a shield line between the insulating substrate and the scanning line, a pixel electrode in the pixel, and a first switching element including a first semiconductor layer. The first semiconductor layer is provided between the scanning line and the shield line, and comprises an intersection area in which the first semiconductor layer intersects the scanning line. The shield line overlaps the intersection area, and is electrically connected to the scanning line through a contact portion.
US10146078B2
An array substrate for a liquid crystal display panel is disclosed. The array substrate includes a first substrate, a Lower Temperature Polycrystal Silicon (LTPS) Thin-Film-Transistor (TFT) disposed on the first substrate, a color photoresist layer disposed on the LTPS TFT, and multiple photo spacers disposed above the color photoresist layer. A liquid crystal display panel including the array substrate and a second substrate disposed oppositely to the array substrate is also disclosed. The present invention utilizes the second substrate to be aligned with the LTPS TFT array substrate in order to form the liquid crystal display panel. Because the second substrate is a bare substrate (without a pattern), when the second substrate is aligned with the array substrate, the alignment precision is not under consideration. Accordingly, apertures ratios of the liquid crystal display panel do not have difference.
US10146072B2
The present disclosure provides a device for reducing residual amplitude modulation. The device includes an electro-optic modulation device with three crystals connected in series. The three crystals are the first cubic crystal, an intermediate crystal, and the second cubic crystal respectively. The intermediate crystal is an electro-optic modulating crystal. The intermediate crystal is connected to the high-frequency signal source module. The specification of the intermediate crystal is X mm×Y mm×d mm. The first cubic crystal and the second cubic crystal is connected to both ends of the intermediate crystal in series along the direction of the X axis. The relative dielectric constant of the first cubic crystal and the relative dielectric constant of the second cubic crystal both are equal to the relative dielectric constant of the intermediate crystal. The specification of the first cubic crystal and the specification of the second cubic crystal both are d/2 mm×Y mm×d mm.
US10146071B2
Provided is an optical transmitter module. The optical transmitter module includes a substrate, a ground layer disposed on the substrate, an electro-absorption modulated laser (EML) chip disposed on the ground layer to generate an modulated optical signal, a ground structure disposed on the EML chip and electrically connected to the ground layer, a matching resistor disposed on the ground structure, and a first bonding wire disposed between the EML chip and the matching resistor to electrically connect the EML chip to the matching resistor.
US10146066B2
A process for manufacturing a negative ophthalmic lens having a central portion (50) and a peripheral portion (52) includes the steps of forming the central portion (50) by forming voxels of a first material having a first refractive index, the central portion having a peripheral zone at its periphery; and forming the peripheral portion (52) from this peripheral zone and contiguous to the perimeter of this peripheral zone, by forming voxels of at least one second material having a second refractive index, the second refractive index being strictly higher than the first refractive index.
US10146061B2
A double-ring lens filter holder includes a limiting ring, a lock ring, a fixed filter, an adjusting ring, a rotary filter, a compression ring, and at least one guide rod. Each guide rod is mounted through a respective curved recess which is formed through the limiting ring, and each guide rod is mounted securely on the rotary filter. When the fixed filter and the rotary filter are both polarizing filters, in addition to moving the guide rod to adjust the polarizing and darkening effects, the curved recess can also limit the rotating angle of the guide rod to eliminate the cross pattern. Besides, the protruding guide rod allows the users to accurately find the position at which the rotary filter can be rotated.
US10146058B2
A visual line direction sensing device communicably connected with a head-up display device, which projects an image on a screen disposed ahead of a target, includes an image capture unit capturing a target image from a front side of the target, an acquisition unit acquiring adjusted position information indicative of an image projection position by an adjustment unit of the head-up display device, an estimation unit estimating positions of pupils of the target based on the adjusted position information acquired by the acquisition unit, a setup unit setting an inspection range of the target image captured by the image capture unit with reference to the positions of the pupils estimated by the estimation unit, and a calculator calculating a visual line direction of the target based on a status of the pupils included in the inspection range of the target image set by the setup unit.
US10146053B2
Near-eye display devices having angularly multiplexed holograms are disclosed. One example includes an image source, a waveguide, and a controller. The waveguide is configured to propagate light received the image source to a user of the near-eye display device, and includes a holographic grating including a plurality of angularly multiplexed holograms. The controller is configured to control display of an image via the image source.
US10146051B2
An optical device includes a digital visual data system, a forward optical assembly, and an elevation manual adjustment and a windage manual adjustment. The elevation manual adjustment and the windage manual adjustment are configured to adjust a position of a movable optical assembly containing an optical merging assembly independently moveable in relation to the forward optical assembly. The optical merging assembly includes a first wedge-shaped component receiving optical data from the forward optical assembly and a second wedge-shaped component adjacent to the first wedge-shaped component that receives and transmits the optical data from the first wedge-shaped component through the second wedge-shaped component toward an eyepiece assembly and that reflects digital visual data from a micro-display toward the eyepiece assembly to present a merged data view when viewed through the eyepiece assembly.
US10146049B2
Various embodiments of the present disclosure may include an imaging system that includes a de-icing assembly. The de-icing assembly may include a de-icing window and a window frame. The de-icing window may be constructed from Float Zone Silicon, single crystal sapphire, and/or germanium. The de-icing assembly may be coupled to a lens barrel of a camera. Heat generated by a heater element of the camera may be conducted via the housing and the lens barrel of the camera to the de-icing assembly. The heated de-icing assembly may prevent the formation of ice on the de-icing window by conducting heat to the de-icing window.
US10146047B1
An optical base station including a base, a light source, a rotation plate and an optical fiber is provided. The light source is disposed on the base for providing a light beam. The rotation plate is disposed on the base. The optical fiber is disposed on the base and has an input end and a first output end. The rotation plate drives the optical fiber to rotate around a rotation axis. The rotation axis passes through the input end. The light beam enters the optical fiber from the input end and is output from the first output end after being transmitted in the optical fiber.
US10146046B2
An information providing method includes: measuring a static object three-dimensionally in an environment, by a processor; sequentially measuring a position of a dynamic object in the environment, by the processor; transmitting measurement data of the static object measured to a predetermined information processing apparatus through a communication network; transmitting measurement data of the dynamic object measured to the information processing apparatus through a communication network; receiving support data rem the information processing apparatus based on an environment grasping image that is generated from the measurement data, of the static object and the measurement data of the dynamic object by the information processing apparatus; and presenting the received support data to the environment at predetermined timing, by the processor.
US10146044B2
In one embodiment, an optical system includes: a first lens configured to receive incoming light from an object; a first mirror comprising a central aperture, the first mirror configured to refract the light from the first lens, reflect the light, and refract the light reflected from the first mirror; a second mirror configured to receive the light from the first mirror, wherein the light is refracted towards a first surface of the second mirror where the light is reflected back and refracted upon exiting the second mirror; a negative corrector lens configured to refract the light from the second mirror through the central aperture of the first mirror; and a positive corrector lens configured to receive the light through the central aperture of the first mirror and refract the light to an imaging surface.
US10146043B2
An image processing device includes: an image acquiring unit configured to acquire a plurality of images of different imaging fields of view on the same subject; an image selector configured to select, from the plurality of images acquired, in which a common region of a predetermined size is set at a common position in the individual images, a plurality of image pairs that are combinations of images in which a subject image in the common region in one image corresponds to a subject image in a region other than the common region in another image; a correction gain calculating unit configured to calculate a correction gain for performing shading correction; and an image correcting unit configured to correct shading produced in a correction-target image, using the correction gain calculated by the correction gain calculating unit.
US10146040B2
A microscope (10) is described, having an aperture limiter (12), arranged in the beam path (22), for generating at least one optical channel (16; 18; 20). The aperture limiter (12) is embodied to set the aperture of the at least one optical channel (16; 18; 20). The aperture limiter (12) is furthermore embodied in such a way that in a first operating mode a first optical channel, and in a second operating mode at least one second optical channel, is selectively generable. The aperture limiter is also arranged in the pupil plane of the beam path.
US10146037B2
A microscope (10) for detecting images of an object (14) located in an object plane (12) is described, comprising a microscope stand (18); a microscope objective (20); a light source (22) integrated into the microscope stand (18); and a beam splitter (24), integrated into the microscope objective (20), for coupling in a coaxial incident illumination.
US10146032B2
The zoom lens consists of, in order from the object side, a first lens group that has a positive refractive power and remains stationary during zooming, a plurality of movable lens groups that move during zooming, and a final lens group that has a positive refractive power and remains stationary during zooming. The final lens group has two or more positive ED lenses formed of a material satisfying predetermined conditional expressions. The predetermined conditional expressions, which relate to extraordinary low dispersion and temperature coefficients of the refractive indices of the positive lenses in the movable lens group closest to the image side and the final lens group, are satisfied.
US10146023B2
An optical fiber cable management panel includes drawer assemblies, each including a drawer slidable within a chassis. The drawer assemblies are secured together by a bracket that includes an interlock arrangement with the chassis. Such an interlock arrangement includes a non-threaded stud engaging a hole. Radius limiters may be part of the drawer assembly and include a cable entry aperture have a closed perimeter and a flared cable guide surface around most of, and preferably all of, the closed perimeter to allow for the entry of cables from all directions. A control mechanism controls movement of the radius limiter relative to the drawer assembly. The control mechanism includes a rotating member that has an axis of rotation transverse to the slidable motion of the radius limiter and normal to the radius limiter.
US10146019B2
An optical connector retaining unit includes: an optical connector retaining member that retains an optical connector of a distal end of an optical fiber in a connection standby state being optically connected to nothing; and a reflecting section that reflects visible light emitted from the distal end of the optical fiber after led into a proximal end of the optical fiber opposite to the distal end thereof provided with the optical connector, at an inclination angle of 45 degrees or less with respect to an optical axis of the emitted visible light, or a scattering section that scatters visible light emitted from the distal end of the optical fiber such that scattered light includes light within the inclination angle of 45 degrees or less with respect to the optical axis of the emitted visible light.
US10146018B2
Optical fiber connector assembly for a fiber optic cable includes an optical fiber having an end portion terminated with a ferrule and rod members. The optical fiber connector assembly includes: a ferrule holder configured to hold the end portion of the optical fiber, the ferrule and the rod members; a connector having an internal passageway for housing the ferrule holder; a locking member extending lengthwise and having an internal passageway for the end portion of the fiber optic cable. A pre-connectorized fiber optic cable includes a fiber optic cable and the optical fiber connector assembly mounted upon an end portion of the fiber optic cable.
US10146015B2
Optical connector arrangements terminate at least seventy-two optical fibers. The optical connector arrangements include multiple optical ferrules that each terminates multiple optical fibers. Some example optical connectors can terminate about 144 optical fibers. Each optical connector includes a fiber take-up arrangement and a flange extending outwardly from a connector housing arrangement. The fiber take-up arrangement manages excess length of the optical fibers. A threadable coupling nut can be disposed on the connector housing arrangement to engage the outwardly extending flange. Certain types of optical connector arrangements include furcation cables spacing the connector housing arrangement form the fiber take-up arrangement.
US10146014B2
Fiber optic assemblies and related fabrication methods include a retaining member having at least one pin section that is configured to extend through an opening defined in at least one side wall of a body structure, to permit the at least one pin section to cooperate with at least one feature of a fiber optic connector received in a cavity of the body structure to thereby retain the fiber optic connector in the cavity. Exemplary body structures include dust caps, adapters, patch panels, fiber optic modules, and the like.
US10146010B2
An optical fiber connection system includes a first and a second optical fiber, each with end portions that are terminated by a first and a second fiber optic connector, respectively. A fiber optic adapter connects the first and the second fiber optic connectors. A fiber alignment apparatus includes V-blocks and gel blocks. Each of the fiber optic connectors includes a connector housing and a sheath. The end portions of the optical fibers are positioned beyond distal ends of the respective connector housings. The sheath is slidably connected to the connector housing and slides between an extended configuration and a retracted configuration. The sheath covers the end portion of the respective optical fiber when the sheath is at the extended configuration and exposes the end portion when at the retracted configuration. The end portions of the optical fibers are cleaned when slid between the V-blocks and the gel blocks.
US10146002B2
The present technology relates to luminaires including light-emitting elements (LEEs), a luminaire module, and at least one optical modifier, where the optical modifier is arranged relative to the luminaire module to receive a fraction of light emitted by the LEEs.
US10146001B2
A lighting system including a LED light source, a convex lens, and a light guide post disposed between the LED light source and the convex lens. The light guide post includes a light emitting portion and a light collecting portion connected to the light emitting portion. The light emitting portion has a light guide post-light emitting surface facing the convex lens. The light collecting portion has an internal reflective surface including at least an elliptical surface having a first focal point and a second focal point. The second focal point is located between the first focal point and the convex lens, and the second focal point is located inside the light guide post.
US10145991B2
A process for manufacturing a mirror includes preparing a mirror core by successively depositing a plurality of layers of a core material to form a core structure; and bonding, using a bonding material, the mirror core to a front polishable faceplate and a back faceplate. A mirror includes a mirror core including a plurality of layers of a core material; a front polished faceplate; and a back faceplate. The front polished faceplate and the back faceplate are bonded to the mirror core with a bonding material.
US10145984B2
A system and method to intelligently group seismic interpretation data, retrieved from an interpretation workflow, in an inventory tree based upon processing history records automatically captured during generation of volume and horizon datasets. As new volume and horizon datasets are created during the interpretation workflow, the relationships between the datasets are stored within system records. Inventory trees are then generated and/or updated based upon these records to intuitively display the relationships between the volume and horizon datasets.
US10145975B2
Data obtained with an electromagnetic energy transmitter in borehole to surface electromagnetic (BSEM) transmitter is processed. The processed data provides measures of detected electromagnetic fields, induced polarization and electromagnetic well logging information of interest for surveying and mapping of subsurface formations.
US10145973B2
Embodiments of the invention provide a method for classifying seismic attributes, including generating data points by cross plotting seismic attributes from a first data volume and a second data volume, encompassing at least one of the generated data points within a polygon, generating a reference line, determining an interpolation direction relative to the reference line, and assigning an attribute value to the at least one generated data point encompassed within the polygon wherein the assigned attribute value is interpolated based on the combination of its position to the reference line along the interpolation direction and the shape of the polygon.
US10145971B2
Methods, apparatuses, and systems are disclosed for multi-station sensor strings. One example apparatus includes a sensor string. The sensor string includes a connector and a common data transmission channel configured to be in communication with a data acquisition unit through the connector. The sensor string also includes a first seismic sensor configured to provide sensed seismic data to the common data transmission channel, and a second seismic sensor also configured to provide sensed seismic data to the common data transmission channel.
US10145966B2
A method of making pixelated scintillator arrays employs a first jig comprising a plurality of recesses and a second jig comprising a plurality of recesses. A plurality of or N scintillator pixels are placed in a plurality of or N recesses of the first jig. The N scintillator pixels have a shape such that a portion of each of the N scintillator pixels is conformably received in one of the N recesses of the first jig, e.g. a portion of each of the N scintillator pixels is received in and conforms to the shape of one of the N recesses. The remaining portion of each of the N scintillator pixels protrudes out from the recess, forming N protrusions substantially conforming to the shape of the recesses of the second jig. An adhesive layer is applied on the N protrusions of the N scintillator pixels. A reflective layer is placed over the N protrusions of the N scintillator pixels. The recesses of the second jig are aligned with the N protrusions of the N scintillator pixels and the reflective layer is pressed with the second jig such that at least a portion of the reflective layer conforms to the N protrusions of the N scintillator pixels, forming a first row of a scintillator array comprising the N scintillator pixels and the at least portion of the reflective layer.
US10145965B1
The present disclosure is directed to a detection assembly for detecting radiation emitted by radionuclides present within an animal. The detection assembly includes a housing having one or more walls defining a chamber. The detection assembly also includes a cover removably positioned over the top end of the housing, with the cover being configured for receipt of the animal. Furthermore, the detection assembly includes a radiation sensor positioned within the chamber. The radiation sensor is configured to detect the radiation emitted by the radionuclides present within the animal. Additionally, the detection assembly includes a shield positioned around a first portion of the radiation sensor, with the shield being configured to at least partially shield the radiation sensor from environmental radiation. A second portion of the radiation sensor is unshielded to permit the radiation sensor to receive radiation emitted by the radionuclides present within the animal.
US10145963B2
Provided are a scintillator with improved energy sensitivity dependence within the energy range of diagnostic X-rays, more specifically in the range of 40-150 kV, and a radiation dosimeter using same. Due to the scintillator comprising a photopolymer resin that contains a polymerizable monomer, a filler, and a photopolymerization initiator, energy sensitivity dependence within the range of 40-150 kV is improved. Furthermore, changes in relative sensitivity within this energy range can be reduced to 3% or less by containing an inorganic fluorescent substance such as Zn2SiO4.
US10145961B1
Efficient transform-based quantization methods and quantization processors implementing such efficient transform-based quantization methods are disclosed. A transform-based quantization method may include: receiving an input signal transformed in a transform domain; producing a low-resolution signal by reducing a resolution of the input signal according to a reduction ratio; inversely transforming the low-resolution signal to produce an inversely transformed low-resolution signal; and quantizing the inversely transformed low-resolution signal to produce a quantized output.
US10145960B2
In at least one embodiment, a vehicle system comprising a vehicle communication module is provided. The vehicle communication module is configured to receive first global positioning system (GPS) data indicative of a location of a vehicle and to receive a first signal indicative of the vehicle being in a drive state. The vehicle communication module is further configured to transmit the first GPS data to an occupant communication device (OCD) in response to the first signal to restrict at least a portion of the operation of the OCD and to reduce power consumption of the OCD.
US10145959B2
A global navigation satellite system (GNSS) receiver includes: at least one radio frequency (RF) front end configured to receive a GNSS signal from a single GNSS antenna and to digitize the GNSS signal into a digitized GNSS signal; at least one processor configured to: calculate weight to be applied to a sample of a block of samples of the digitized GNSS signal; apply the weight to at least one sample of the block of samples of the digitized GNSS signal to create a weighted GNSS signal; and perform signal processing on the weighted GNSS signal.
US10145958B2
The wireless communication device includes a wireless communication transceiver to generate an oscillator control signal and an activation signal, a positioning-system receiver (e.g. a GPS receiver) to process received positioning signals, and a shared oscillator (e.g. a temperature compensated and voltage controlled crystal oscillator TCVCXO) responsive to the oscillator control signal and to generate a reference frequency signal for the wireless communication transceiver and the positioning-system receiver. The positioning-system receiver may control processing of the received positioning signals based upon the activation signal to reduce a noise contribution (e.g. phase noise) due to frequency control of the shared oscillator based upon the oscillator control signal. The activation signal may indicate that the oscillator control signal is being varied to provide frequency control or adjustment of the shared oscillator.
US10145952B2
A vehicle-mounted radar device providing stabilized performance and enabling a radar main body to be installed easily on a radar bracket. Radar device 100 includes radar main body 106 and a radar bracket 108 for installing on a vehicle. The radar bracket 108 forms an opening area 140 which exposes a transmission and reception surface 112 of the radar main body 106. One or more support parts which are provided on the side plate part 116, and support the radar main body 106 by contacting a side surface 128, or the transmission and reception surface 112 form a withdrawn shape 160 at the end of each of the support parts near the center of the transmission and reception surface 112 and is inclined toward the side distant from the center of the transmission and reception surface 112 and toward the outside of the vehicle.
US10145951B2
An object-detection system includes a radar sensor, a camera, and a controller. The radar-sensor is suitable for mounting on a vehicle and is used to detect a radar-signal reflected by an object in a radar-field-of-view. The radar-signal is indicative of a range, range-rate, and a direction to the object relative to the vehicle. The camera is used to capture an image of a camera-field-of-view that overlaps the radar-field-of-view. The controller is in communication with the radar-sensor and the camera. The controller is configured to determine a range-map for the image based on the range and the direction of the radar detection, define a detection-zone in the image based on the range-map, and process only the detection-zone of the image to determine an identity of the object.
US10145950B2
A RADAR apparatus may be used in target detection and/or avoidance. The RADAR apparatus may include a microwave front end configured to transmit and receive RF signals, an analog signal conditioning module coupled with the microwave front end module that conditions RF signals received at the microwave front end module, and a digital signal processing module coupled with the analog signal conditioning module that detects presence and range of one or more targets based on the filtered RF signals.
US10145942B2
Various embodiments are generally directed to an apparatus, method, system, and/or other techniques to determine estimated ambient electromagnetic (EM) radiation information based at least partially on ambient recovery sensor measurement information, determine estimated albedo information based at least partially on albedo recovery sensor measurement information, albedo recovery emitter modulation information, sensing matrix information, and the estimated ambient EM radiation information, and determine estimated range information based at least partially on range recovery sensor measurement information, the estimated albedo information, range recovery emitter modulation information, and sensing matrix information.
US10145937B2
A FMCW radar receiver includes a LO providing a chirped LO signal, an in-phase (I) channel for outputting I-data and a quadrature (Q) channel for outputting Q-data. A dynamic correction parameter generator generates IQ phase correction values (P[n]s) and IQ gain correction values (G[n]s) based on a frequency slope rate of the chirped LO signal for generating during intervals of chirps including a first sequence of P[n]s and G[n]s during a first chirp and a second sequence of P[n]s and G[n]s during a second chirp. An IQ mismatch (IQMM) correction circuit has a first IQMM input coupled to receive the I-data and a second IQMM input receiving the Q-data, and the P[n]s and G[n]s. During the first chirp the IQMM correction circuit provides first Q′-data and first I′-data and during the second chirp the IQMM correction circuit provides at least second Q′-data and second I′-data.
US10145928B2
An example method for mapping tissue magnetic susceptibility includes acquiring magnetic resonance (MR) data, where the MR data correspond to a subject, determining a magnetic field based on the MR data, determining a relationship between the magnetic field at a given location to the magnetic susceptibility at that location, and performing a convolution operation on the relationship between the magnetic field at the given location to the magnetic susceptibility at that location to obtain a noise property. The method also includes estimating a magnetic susceptibility distribution of the subject based, at least in part, on the noise property, and generating one or more images of the subject based on the estimated susceptibility distribution of the subject.
US10145926B2
A system includes applying, to patient tissue, a first imaging sequence comprising first balanced gradient pulse trains and RF pulses, where phases of successive RF pulses in the first imaging sequence differ by a first pulse phase increment, detecting first signals emitted from the patient tissue in response to the first imaging sequence, and to generate a first image based on the first signals, applying, to the patient tissue, a second imaging sequence comprising second balanced gradient pulse trains and RF pulses, where phases of successive RF pulses in the second imaging sequence differ by a second pulse phase increment different from the first pulse phase increment, detecting second signals emitted from the patient tissue in response to the second imaging sequence, and to generate a second image based on the second signals, applying motion-correction processing to the first image to generate a first motion-corrected image, applying motion-correction processing to the second image to generate a second motion-corrected image, and generating a composite image based on the first motion-corrected image and the second motion-corrected image.
US10145918B2
A method for emitting a sequence of high frequency pulses that may have different envelopes in a magnetic resonance tomography system is provided. A digital instruction signal that specifies the envelope for the high frequency pulses that are to be emitted is received. A digital control signal is transmitted to a high frequency unit for generating high frequency pulses, depending on the instruction signal. A test signal that allows notification of a current overload situation is received. The current control signal is reduced if the test signal indicates an overload situation.
US10145905B2
A gas cell sealing method includes bonding step in which a bonding portion of a gas cell main body having an opening and a lid for closing the opening where a sealant for bonding the gas cell main body and the lid is provided is heated by converging a laser beam from a laser light source through an optical element, and the lid is bonded to the gas cell main body by applying pressure in a direction that presses the lid against the gas cell main body, the pressure being applied while the laser beam is being converged to the bonding portion.
US10145895B2
The present disclosure describes using the JTAG Tap's TMS and/or TCK terminals as general purpose serial Input/Output (I/O) Manchester coded communication terminals. The Tap's TMS and/or TCK terminal can be used as a serial I/O communication channel between; (1) an IC and an external controller, (2) between a first and second IC, or (3) between a first and second core circuit within an IC. The use of the TMS and/or TCK terminal as serial I/O channels, as described, does not effect the standardized operation of the JTAG Tap, since the TMS and/or TCK I/O operations occur while the Tap is placed in a non-active steady state.
US10145892B2
A method for increasing a resolution of an on-chip measurement circuit is provided. The method includes propagating a first signal through the on-chip measurement circuit to generate a first output. The method also includes propagating a second signal through the on-chip measurement circuit to generate a second output. The second signal includes a delay. The method also includes reconciling the first output and the second output to determine the resolution of the on-chip measurement circuit. The resolution of the on-chip measurement circuit increases in correspondence with a fineness of a step of the delay.
US10145890B2
A controller is switched from a first mode to a second mode, where the controller in the first mode is to manage a plurality of electronic devices collectively as a logical unit. The controller in the second mode is used to individually test the plurality of electronic devices, where the controller in the second mode allowing sending of a test command individually to a respective one of the plurality of electronic devices.
US10145888B2
An electronic device is provided. The device includes a first connector configured to couple with a second connector and including a plurality of contacts separated from each other, and a processor configured to detect an incomplete connection between the first connector and the second connector when an electric current does not flow through at least one of the contacts.
US10145885B2
An electrical leakage detection apparatus includes a microcomputer and a relay. The microcomputer is configured to perform an electrical leakage diagnosis to determine whether or not a direct-current leakage exists from a secondary battery that provides and receives electricity to/from an alternating-current power system that includes an electrical leakage detector that detects an alternating-current leakage of alternating-current power supplied from a utility power source. The relay disconnectably connects the secondary battery with the microcomputer.
US10145884B2
A smart cord reel cable including at least one sensor for measuring cord or cord reel usage, a memory for receiving sensor input to create usage records, and a processor for analyzing the usage records to provide information for maintenance status indication and/or usage analytics.
US10145883B2
A circuit arrangement for detecting a solenoid valve type in vehicles, including at least one solenoid valve in the circuit arrangement for detecting the solenoid valve type and having at least one coil winding having a resistance of the typical order of magnitude for a predetermined vehicle electrical distribution system supply voltage, a constant current source, arranged to impress a predetermined measurement current into the one coil winding of the solenoid valve, a current mirror circuit, arranged to generate a second voltage on a detection section of the circuit arrangement from a first voltage produced as a result of the impressed measurement current on the at least one coil winding of the at least one solenoid valve, in which the second voltage produced on the detection section is passed out, on the detection section, directly to a microcontroller in a control device for determining the type of solenoid valve.
US10145882B2
Embodiments relate to systems and methods for sensor self-diagnostics using multiple signal paths. In an embodiment, the sensors are magnetic field sensors, and the systems and/or methods are configured to meet or exceed relevant safety or other industry standards, such as SIL standards. For example, a monolithic integrated circuit sensor system implemented on a single semiconductor ship can include a first sensor device having a first signal path for a first sensor signal on a semiconductor chip; and a second sensor device having a second signal path for a second sensor signal on the semiconductor chip, the second signal path distinct from the first signal path, wherein a comparison of the first signal path signal and the second signal path signal provides a sensor system self-test.
US10145875B1
The various embodiments herein disclose an improved method and system for detection, monitoring and management of electrosmog levels at required locations which comprises of electrosmog levels being read by one or more sensors on the multiple sensor device installed at multiple locations, recording, interpreting and processing the data relating to electrosmog levels by using various scientific algorithm and mathematical calculation at the central monitoring equipment device and providing the user a simplified and more accurate data representing the levels of the electrosmog and identifying the source of the electromagnetic contamination.
US10145874B2
A method for determining scattering parameters of a device under test using a real-time oscilloscope. The method includes calculating a reflection coefficient of each port of a device under test with N ports, wherein N is greater than one, based on a first voltage measured by the real-time oscilloscope when a signal is generated from a signal generator. The method also includes determining an insertion loss coefficient of each port of the device under test, including calculating the insertion loss coefficient of the port of the device under test to be measured based on a second voltage measured by the real-time oscilloscope when a signal is generated from a signal generator.
US10145868B2
A self-referenced on-die voltage droop detector generates a reference voltage from the supply voltage of an integrated circuit's power distribution network, and compares this reference voltage to the transient supply voltage in order to detect voltage droops. The detector responds to detected occurrences of voltage droop with low latency by virtue of being located on-die. Also, by generating the reference voltage from the integrated circuit's power domain rather than using a separate reference voltage source, the detector does not introduce noise and distortion associated with a separate power domain.
US10145861B2
A detection device having an attached probe, the detection device including a base body (100) and a probe (200). The base body (100) is provided with a stage (140), the probe (200) is provided with a probe base body (210) and a tip (220) extending from a side surface of one end of the probe base body (210), another end of the probe base body (210) is adhered to the base body (100) via an adhesion piece (230), the probe base body (210) can be removed from the base body (100), and the tip (220) is close to the stage (140) and deployed in the direction thereof. The probe base body (210) is directly attached to the base body (100) and easily removed therefrom. It is therefore easy to replace the probe (200).
US10145852B2
Disclosed herein are methods and systems for detecting CD3 and CD16 in the same sample of a colorectal, head & neck, or lung tumor using immunohistochemical methods using primary antibodies from the same host species and secondary antibodies immunoreactive with antibodies of the host species of the primary antibodies. Methods to denature and block the first primary antibody contacted with the sample are provided.
US10145850B2
This invention relates to a method of detecting or determining the presence of prostate cancer cells in a sample of body fluid from a subject comprising: (i) isolating cells from said sample to provide a cell sample; (ii) contacting said cell sample with a specific binding member capable of binding a prostate antigen; and/or (iii) contacting said cell sample with a specific binding member capable of binding a minichromosome maintenance (MCM) polypeptide(s); and (iv) determining the binding of said specific binding member(s) to the cell sample.
US10145839B2
The invention principally relates to a method of detecting a disease agent in blood, comprising: (i) creating a sample infra-red spectrum representative of the blood, with one or more spectral components, each having a wavenumber and absorbance value; (ii) providing a reference database of spectral models, each model having one or more database spectral components of a wavenumber and an absorbance value, wherein the database spectral components identify disease agents; (iii) determining whether one or more database spectral components corresponds to one or more sample spectral components; and (iv) compiling a list of corresponding database components identified.
US10145817B2
Vertically cut a “quasi-upper buffer chamber” (such as the part 11 of US 8808520) into 2 pieces of U-shaped doorframes, and then fix them onto the 2 opposite side walls of a transparent ark, so as to divide the ark into 3 compartments. Position a tubular telescopic urging mechanism into the middle compartment, and then use it to push 2 vertical slice gel cassettes to resting against the 2 door-frames respectively, so as to convert the 3 compartments into 3 watertight compartments. Wherein, the middle one is the lower buffer chamber, while the other 2 are the 2 upper buffer chambers of the present anti-traditional vertical slice gel electrophoresis cell.
US10145814B2
In order to improve the endurance of this internal solution for a reference electrode beyond that in the prior art, the solution is made to contain a copolymerized material of a crosslinker having a plurality of non-acrylamide functional groups, and a non-acrylamide monofunctional hydrophilic monomer.
US10145807B2
The present invention provides deterioration analysis method which allows a detailed analysis of deterioration, especially deterioration of surface conditions, of a polymer material. The present invention relates to a deterioration analysis method, including irradiating a polymer material with high intensity X-rays, and measuring X-ray absorption while varying the energy of the X-rays, to analyze deterioration of the polymer.
US10145806B2
An X-ray apparatus includes: an X-ray source that radiates X-rays upon an object to be measured; a frame upon which the X-ray source is mounted; an anti-vibration mechanism that attenuates vibration applied to the frame; and a shift mechanism that shifts the frame and the anti-vibration mechanism integrally together.
US10145801B2
A system and a method are provided for sampling and analyzing organic material, including soil, fertilizer, manure and leaves. A sample container having porous sidewalls and a unique identifier is provided. A geographic position corresponding to a location where a sample was taken is associated with the unique identifier. The sample container with the sample contained therein is received, and the sample is compacted while inside the sample container. The sample is analyzed while inside the sample container using a Laser Induced Breakdown Spectroscopy (LIBS) system and analysis results are generated. The analysis results of the sample are associated with the unique identifier of the sample container.
US10145799B2
The present disclosure provides a system and method for a fiber-coupled, metal-tip chemical imaging spectroscopy. The system couples the electromagnetic radiation (EMR), such as laser light, through an optical fiber to a conductive tip for both EMR excitation to the sample through the conductive tip and EMR signal collection from the sample through the conductive tip. The system and method effectively eliminates the need for an optical alignment between the EMR source and the tip, and still offers the customary spatial resolution of a non-coupled system.
US10145798B2
The disclosure relates to a carrier for single molecule detection. The carrier includes a substrate and a metal layer on the substrate, wherein the substrate includes a base and a patterned bulge located on a surface of the base, the patterned bulge includes a number of strip-shaped bulges intersected with each other to form a net and define a number of holes, and the metal layer is located on the patterned bulge. The carrier for single molecule detection has a relative higher SERS and can enhance the Raman scattering.
US10145797B2
The disclosure relates to a method for detecting single molecule. The method includes: providing a carrier; detection disposing a single molecule sample on the carrier, and detecting the single molecule sample with a detector. The carrier includes a substrate and a metal layer on the substrate, wherein the substrate includes a base and a patterned bulge located on a surface of the base, the patterned bulge includes a number of strip-shaped bulges intersected with each other to form a net and define a number of holes, and the metal layer is located on the patterned bulge. The method is more accurate because the carrier has a relative higher SERS and can enhance the Raman scattering.
US10145791B2
To minimize or prevent obstruction by a surface-mounted part or disturbance to an object to be visually observed, an electric field sensor is placed at a predetermined distance from a surface of the object to be visually observed, and a two-dimensional distribution of a high-frequency electric field is detected. Considering that the measured electric field distribution is due to an electrostatic field from the electric field distribution at the surface of the visually observed object, the electric field distribution at the surface is back-calculated from Gauss' flux theorem or the like, and the obtained electric field distribution is displayed or outputted. Thus, the electric field distribution at a position closer to the surface of the visually observed object is imaged while obstruction by a surface-mounted part or disturbance to the visually observed object is suppressed.
US10145787B2
This invention discloses an excreta occult blood inspection method and the apparatus thereof. The inspection method comprises the following steps. At least one light source is provided to emit at least one light to illuminate excreta to produce at least one specimen light. At least one photo-sensitive unit is provided to receive the specimen light and generate a detected data. An analysis processor is provided to receive and analyze the detected data to produce an analysis data. Above-mentioned method and apparatus can make excreta occult blood inspection become efficient and convenient.
US10145785B2
Provided is an optical element rotation type Mueller-matrix ellipsometer for solving a problem of measurement accuracy and measurement precision occurring due to residual polarization of a light source, polarization dependence of a photo-detector, measurement values of Fourier coefficients of a high order term in dual optical element rotation type Mueller-matrix ellipsometers according to the related art capable of measuring some or all of components of a Mueller-matrix for any sample.
US10145782B2
The mechanical testing apparatus comprises a wheel and a platform. The wheel is configured to hold a first specimen and rotate relative to a second specimen to apply torque to the second specimen using the first specimen. The platform is biased towards the wheel and configured to hold the second specimen.
US10145766B2
A smear preparing apparatus of an embodiment includes: a transportation part that holds and transports a microscope slide; a housing defining a room therein, the housing including: an insertion opening through which the microscope slide transported by the transportation part is to be inserted, and a feed opening through which air is to be fed; and a blower configured to feed the air through the feed opening to the microscope slide housed in the housing. The housing further includes a discharge opening through which the air fed from the blower through the feed opening is discharged.
US10145756B2
An embodiment of a method and system for inspecting clear and printed contact lenses is provided. A contact lens is inspected by illuminating the contact lens using bright-field illumination and low-angle dark-field illumination simultaneously, when the contact lens is disposed in a cavity between a male mold and a female mold. Further, the light emerging from the contact lens is received by an imaging optical system, and a camera uses the light received by the imaging optical system to capture an image of the contact lens. Further, a data processing system is configured to identify dark defects in the image that are in a first portion of a dynamic range of brightness, and to identify bright defects in the image that are in a second portion of the dynamic range of brightness.
US10145754B2
A method for detecting gas leakage from a radioactive material sealed container includes measuring a temperature at a bottom portion of a metallic sealed container. A feeding air temperature of external air passing between the metallic sealed container and a concrete-made storage container is also measured. Presence of leakage of inactive gas is determined by comparing the temperatures or by utilizing a physical amount calculated by using the temperatures.
US10145750B2
An MEMS pressure sensing element is disclosed, comprising a substrate with a groove; a pressure-sensitive film on the substrate for sealing an opening of the groove to form a sealed cavity body; and a pressure-sensitive beam suspended in the sealed cavity body and parallel with the pressure-sensitive film provided with varistors, wherein a center of the pressure-sensitive beam is fixedly connected to that of the pressure-sensitive film, and a periphery is fixedly connected to a bottom wall of the groove of the substrate, such that the pressure-sensitive film drives the pressure-sensitive beam to bending deformation under an external pressure.
US10145748B2
Pressure indicator comprising a base, a deformable membrane fixed to the base in a fluid-tight manner according to a closed contour, and a body fixed to the base, delimiting a hollow volume covering the deformable membrane on the side opposite the base, while encompassing at least the closed contour, at least one inlet for a fluid the pressure of which is to be measured in a pressure range, wherein the deformable membrane is such that the expansion thereof for said pressure range is sufficient to be visible to the naked eye and to allow a direct display indicative of the pressure, in that the base is drilled with at least one first hole a first end of which emerges between the deformable membrane and the base in the closed contour, in that the body is drilled with at least one second hole a first end of which emerges into said hollow volume, in that the other end of the first hole is linked to the inlet respectively to the open air, in that the other end of the second hole is linked to the open air, respectively to the inlet, so that a pressure, respectively a pressure reduction, of fluid at the inlet causes an expansion of the deformable membrane in the hollow volume delimited by the body. Application of such an indicator to the monitoring of the inflation of a medical apparatus pad.
US10145747B1
Certain aspects relate to systems and techniques for detection of undesirable forces on one or more surgical robotic arms. In one aspect, there is provided a system including a robotic arm, including: two linkages, a joint, a torque sensor, and an instrument device manipulator (IDM). The system may further include a processor configured to measure a first torque value at the joint based on an output of the torque sensor and determine a second torque value at the joint based on a position of the robotic arm. The second torque value may be indicative of a gravitational component of the torque between the two linkages. The processor may be further configured to determine a force at the IDM based a difference between the first and second torque values and determine whether the robotic arm has collided with an object or misaligned based on the force at the IDM.
US10145745B2
To facilitate the anodic bonding of individual layers without precipitation of movable ions in a three-layer structure interposing a glass substrate such as a silicon-glass-silicon structure, an anodic bonding condition for a sensor chip and a glass substrate in a secondary anodic bonding process is made weaker than an anodic bonding condition for a silicon tube and the glass substrate in a primary anodic bonding process. The secondary anodic bonding process is completed before movable ions in the glass substrate that have been attracted to a part of the glass substrate close to a cathode in the primary anodic bonding process reach a bonded surface between the glass substrate and the silicon tube in the secondary anodic bonding process.
US10145744B2
The present invention intends to eliminate the need for a temperature detecting element adapted to measure the temperature of a roll main body in an induction-heated roller apparatus, and includes an impedance calculation part that calculates the impedance of a winding, a relational data storage part that stores relational data indicating the relationship between the impedance of the winding and the temperature of the roll main body, and a roll temperature calculation part that calculates the temperature of the roll main body from the impedance obtained by the impedance calculation part and the relational data stored in the relational data storage part.
US10145739B2
An fabrication method of a waveguide sheet for a spectrometer includes the steps of: providing a pattern to be performed by a microelectromechanical (MEM) process; and forming at least one waveguide sheet based on the provided pattern by the MEM process. The pattern includes a shape of a first waveguide sheet. The waveguide sheet includes at least one positioning side and at least one stray light elimination side formed by the MEM process. The positioning side is for a spectral component of the spectrometer to abut against so that the spectral component is positioned at the positioning side, and the stray light elimination side is to be used as a side of a stray light outlet. The structure of the waveguide sheet and the configuration of the spectrometer are also provided.
US10145736B2
At least some embodiments are directed to a light detection system comprising a photodiode, a transimpedance amplifier (TIA) having a differential output and a differential input coupled across the photodiode, a first bias current source coupled to an anode of the photodiode, and a second bias current source coupled to a cathode of the photodiode. The system also comprises a dynamic control logic coupled to the first and second bias current sources and configured to vary bias currents provided by the first and second bias current sources based on the differential output such that the photodiode is reverse-biased.
US10145735B2
A technique for effectively detecting abnormal values in electromagnetic wave measurement is provided. An electromagnetic wave measuring device includes a measurement data receiving unit 308, an abnormal value detecting unit 309, and a GUI controlling unit 306. The measurement data receiving unit 308 receives measurement data of electromagnetic waves that are measured at multiple positions. The abnormal value detecting unit 309 detects an abnormal value in the measurement data. The GUI controlling unit 306 displays a position at which the abnormal value is measured, on a display.
US10145725B2
A method of calibrating a weighing system associated with a worksite is provided. The method includes, receiving, from the weighing system, readings indicative of a payload on a first set of machines and a second set of machines of the worksite. The second set of machines are configured to receive a payload from the corresponding first set of machines. The method also includes formulating a predefined number of equations from the readings and determining error coefficients of the weighing system by optimizing the predefined number of equations. The method further includes calibrating the weighing system based on the determined error coefficients.
US10145718B2
A level gauge with a control and evaluation electronic comprising a signal generator for generating an alternating voltage, a signal detector for detecting a reflected voltage, a resonant measuring probe, and a connecting element, which connects the evaluating electronic electrically to the measuring probe, with the connecting element comprising a first connecting conductor, which connects the signal generator to the measuring probe, and a second connecting conductor which connects the measuring probe to the signal detector.
US10145714B2
A field device, especially an ultrasonic, flow measuring device, comprising: a transmitter for producing an alternating exciter signal; and at least one transducer, especially first and second ultrasonic transducers. The transmitter additionally has a generator for producing the alternating exciter signal and a transmitting stage, wherein the generator is connected via the transmitting stage with at least the first ultrasonic transducer. An output of the transmitting stage is connected with the transducer, especially the first ultrasonic transducer, via a first signal path, wherein the first signal path has a first resistance element, wherein a second signal path branches from the first signal path, wherein the second signal path has a second resistance element connected on one side to ground for lessening impedance related fluctuations of the exciter signal, wherein the second signal path branches from the first signal path between the output of the transmitting stage and the first resistance element.
US10145711B2
Embodiments of the present disclosure provide an optical encoder for an electronic device. The optical encoder includes a spindle and an encoded pattern disposed around a circumference of the spindle. The encoded pattern may include one or more surface features that create a direction-dependent reflective region.
US10145702B2
A method for predicting a destination of a vehicle includes receiving vehicle data from a plurality of sensors, the vehicle data including at least a current location and a current time, determining a plurality of usage scenarios based on the vehicle data, accessing historical vehicle data and user data from a database, assigning, based on the vehicle data, a likelihood value to each of the plurality of usage scenarios, and predicting a set of destinations and routes for each of the plurality of usage scenarios.
US10145701B1
A method and a system for recommending a pedestrian route based on crowd-sourced pedestrian navigation associated with an indoor area. The method comprises displaying a set of graphical icons representing a respective route traversal profile option, the set rendered within a graphical user interface (GUI) of a mobile device, the GUI depicting a layout of the indoor area, receiving a selection of a graphical icon from the set, storing route activity data in association with the selected graphical icon during traversal, by the mobile device, of a route within the layout, adding the route activity data to accumulated route navigation data associated with the selected graphical icon, and based on a predetermined threshold associated with the adding, deploying the respective route traversal profile option represented by the selected graphical icon, the profile option recommending the pedestrian route based at least in part on the route activity data.
US10145695B2
The route from a prescribed starting node to a prescribed destination node is determined on the basis of digital map data stored in a memory unit such that, for possible expansion of a respective current node, total costs are determined for the current node on the basis of a sum of edge costs for an optimum route from the starting node to the current node and a destination-node-related heuristic value for the current node and a prescribed destination-node-related correction value. The destination-node-related correction value is in this case representative of a mean value for cost ratios for respective nodes in a prescribed set, wherein the respective cost ratios are dependent on the edge costs of the connections that are situated between the current node and the respective node in the set and that represent an optimum route between the current node and this node in the set and on a heuristic value for the current node in relation to this node in the set.
US10145692B2
A vehicle position determination apparatus includes a storage device that stores map information containing positions of terrestrial objects located around roads, a vehicle position estimator that estimates a current position of a vehicle in the map information, a camera that captures an image of an area around the vehicle, an area identifier that identifies an area in which a terrestrial object to serve as a recognition target is located, the area Q being identified in the map information based on a predetermined condition, a terrestrial object recognizer that recognizes, in the image, the terrestrial object in the area Q, a relative position calculator that calculates, in the map information, a relative position of the vehicle P with respect to a position of the terrestrial object recognized, and a position corrector that corrects the current position of the vehicle based on the relative position calculated by the relative position calculator.
US10145690B2
Map information generation systems, methods, and programs acquire a movement track of a mobile body, and correct a position of the movement track such that the movement track approaches an existing road. The systems, methods, and programs acquire a section in which the corrected movement track does not correspond to the existing road as a new road, and add information that indicates the new road to map information.
US10145686B2
In order to provide a technology capable of suppressing degradation of measurement accuracy due to fluctuation of detection sensitivity of an MEMS by suppressing fluctuation in natural frequency of the MEMS caused by a stress, first, fixed portions 3a to 3d are displaced outward in a y-direction of a semiconductor substrate 2 by deformation of the semiconductor substrate 2. Since a movable body 5 is disposed in a state of floating above the semiconductor substrate 2, it is not affected and displaced by the deformation of the semiconductor substrate 2. Therefore, a tensile stress (+σ1) occurs in the beam 4a and a compressive stress (−σ2) occurs in the beam 4b. At this time, in terms of a spring system made by combining the beam 4a and the beam 4b, increase in spring constant due to the tensile stress acting on the beam 4a and decrease in spring constant due to the compressive stress acting on the beam 4b are offset against each other.
US10145674B2
Methods and systems for performing optical measurements of geometric structures filled by a capillary condensation process are presented herein. Measurements are performed while the structures under measurement are treated with a flow of purge gas that includes a controlled amount of fill material. A portion of the fill material condenses onto the structures under measurement and fills openings in the structural features, spaces between structural features, small volumes such as notches, trenches, slits, contact holes, etc. The degree of saturation of vaporized material in the gaseous flow is adjusted based on the maximum feature size to be filled. In some examples, measurement data, such as spectroscopic data or image data, are collected when a structure is unfilled and when the structure is filled by capillary condensation. The collected data are combined to improve measurement performance.
US10145673B2
A method for obtaining distance measurements for a plating ring assembly and related device are provided. Embodiments include attaching a measurement device to a plating ring assembly, the plating ring assembly including: an outer ring, wherein the measurement device is attached to the outer ring and configured to rotate along the outer ring, a seal extending from a bottom surface of the outer ring along a circumference of the plating ring assembly, contact fingers located along the circumference of the plating ring assembly, between the outer ring and the seal, rotating the measurement device along the circumference of the outer ring by rotating the measurement device or the plating ring assembly; and obtaining critical dimensions of and between the seal and contact fingers with the measurement device.
US10145670B2
Systems and methods that provide a framework for location tracking of a movable target component or device (e.g., an automated device or a hand-operated device) to accurately cover an area of interest along a specified path or in a specified region. Grid patterns are projected onto a surface of a workpiece or a part. The projected grid lines may be straight or curved. Straight grid lines can be parallel or intersecting. The grid pattern may include a path to be followed. The lines of the projected grid pattern are detected by a grid detection sensor which is mounted onboard the movable target component or device. Information from the grid detection sensor is fed to a location mapping program. The systems and methods also enable navigation for use in automated and autonomous manufacturing and maintenance operations, as well as other tracking-based applications.
US10145669B2
A method and system are proposed to obtain a reduced speckle noise image of a subject from optical coherence tomography (OCT) image data of the subject. The cross sectional images each comprise a plurality of scan lines obtained by measuring the time delay of light reflected, in a depth direction, from optical interfaces within the subject. The method comprises two aligning steps. First the cross sectional images are aligned, then image patches of the aligned cross sectional images are aligned to form a set of aligned patches. An image matrix is then formed from the aligned patches; and matrix completion is applied to the image matrix to obtain a reduced speckle noise image of the subject.
US10145662B2
The present invention provides a method of making polymer ammunition having a metal injection molded primer insert.
US10145660B1
The present invention discloses a dual-technology sensor head tightly integrating an Electromagnetic Induction (EI) sensor coil for detection, localization and discrimination of metal in mines and Improvised Explosive Devises (IED), and a dual polarized Ultra-Wideband (UWB) radar antenna array for Ground Penetrating Radar for detection, localization and discrimination of same. The core challenge addressed is how to prevent the EI sensor from detecting the metal in the UWB antenna which then desensitizes the EI sensor and degrades its dynamic range. The key characteristic of the new UWB radar antenna design is its very low magnetic induction, thereby imposing very little degradation to the EI coil. Additionally, the UWB antenna array incorporates unique design features to enhances its low frequency performance for better penetration of the ground. Through the design guidelines taught herein the EI sensor has been demonstrated to incur no degradation from the proximate UWB array.
US10145656B2
A system, method, and blocking pad for receiving strikes from a special individual. The blocking pad includes a pad configured to receive the blows from the special individual. The blocking pad further includes a number of handles connected to a back of the pad. The number of handles include at least two handles in a middle portion of the back of the pad and at least a handle at ends of the pad.
US10145651B2
In an adjusting knob mechanism, a base includes a first supporting portion and a second supporting portion. A first clicking gear includes a plurality of first indentations and disposed on the first supporting portion. A second clicking gear includes a plurality of second indentations and disposed on the second supporting portion. A limiting element is disposed on the base. A movable element is disposed within the limiting element and configured to move in an axial direction of the base relative to the limiting element. A connecting mechanism extends into the limiting element. An adjusting cover is connected to the movable element by the connecting mechanism, so as to move the movable element in the axial direction of the base relative to the limiting element and the second clicking gear. The adjusting cover is configured to rotate the limiting element and the movable element through the connecting mechanism.
US10145645B2
Disclosed herein is a device that releases a bow string in response to engagement of parts fitted over the teeth of a user. The present invention provides a release signal transmitting device that includes at least one switching means and a signal transmitter, and a release signal receiving device that includes a signal receiver, a controller and an actuator. The release signal transmitting device has a mouthpiece structure that is fitted over the teeth of the user. The release signal receiving device has a shooting mechanism that is interlocked to the actuator.
US10145634B2
A captive recoil spring assembly includes a guide rod surrounded by a coil spring. The spring is captured between a base at one end of the guide rod, and a body at its opposite end. The body is shaped to engage the spring at one or more sectors, leaving one or more remaining sectors free to engage the slide. Use of such a body permits a round wire spring to be used without the need for close dimensional tolerances on the engaging parts.
US10145632B2
A receiver for an AK-47 style firearm includes an upper receiver and a lower receiver. The upper receiver includes a first side element, a second side element coupled to the first side element, a trunnion support formed between the first side element and the second side element proximate a forward end thereof, and a pivot block formed between the first side element and the second side element intermediate the forward end and a rearward end thereof. The lower receiver is hingedly coupled to the pivot block and movable between an open position and a closed position.
US10145629B2
The present disclosure is directed to a metal-containing apparatus including a substrate member constructed of a metal that is highly resistant to pitting corrosion and wear in aggressive media. An exemplary metal-containing apparatus is a plate heat exchanger. The metal includes an oxidation layer on the surface thereof and a thin metal oxide nanoporous film on top of the oxidation layer. The nanoporous film is highly compliant and is comprised of oxygen and aluminum, titanium, silicon, zirconium and combinations thereof.
US10145626B2
A heat recovery steam generator (“HRSG”) includes a first casing having an interior enclosing at least one duct for gas to flow therein along a gas flow axis. Each duct is defined by duct defining members that are spaced apart from each other and extend into the interior of the first casing. A plurality of stiffening members are elongated along the gas flow axis. Each of the stiffening members are positioned between two of the duct defining members. The stiffening members and duct defining members have a substantially similar coefficient of thermal expansion.
US10145623B2
A vehicle heat exchanger tube (2) comprises at least a first and a second separate fluid channel (14, 16). A tube stiffener (38) has a first stiffening portion (40) stiffening the first channel (14) of the tube (2), and a second stiffening portion (42) stiffening the second channel (16) of the tube (2). The first stiffening portion (40) comprises a first supporting surface (46) supporting the first larger surface (20) of the first channel (14), and a second supporting surface (48) supporting the second larger surface (22) of the first channel (14). The second stiffening portion (42) comprises a first supporting surface (56) supporting the first larger surface (26) of the second channel (16), and a second supporting surface (58) supporting the second larger surface (28) of the second channel (16).
US10145618B2
The embodiments herein provide a portable heat treatment machine comprising a forge body having a burn chamber surrounded by a housing, shell, or forge body. The openings are provided at the front side and at the back side of the forging body to move a forging material in and out of the burn chamber. The openings of the burn chamber and the forge body are covered with a sliding door. The sliding doors are opened to the desired degree to prevent a heat loss. A tab is provided to limit the movement of the sliding doors. Any desired off-shelf burner is inserted through a burner insert hole provided at the side of the forge body and is held and supported by a bracket attached to the forge body. Several legs are removably attached to the forge body to adjust the height of the body.
US10145609B2
A method and apparatus for argon recovery in which an impure argon stream is separated from air within a cryogenic air separation unit having an argon rejection column and a reflux type argon condenser disposed internally within the lower pressure column. An impure argon stream is subsequently recovered from the argon rejection column and purified within an integrated adsorbent based argon refining and purification subsystem to produce product grade argon. The waste stream from the adsorbent based argon refining and purification subsystem is recycled back to the argon rejection column so as to improve the argon recovery.
US10145606B2
An illustrative refrigeration unit door includes a transparent window portion that receives light from a light source such that the light exhibits total internal reflection within the window portion. A series of uniformly-sized prisms with non-uniform spacing ejects light from one face of the transparent window portion at angles around 60 degrees and 30 degrees. Collimated light can be used to reduce the amount of light ejected from a second face of the transparent window that is opposite the first face.
US10145605B2
The refrigerator includes item storage units arranged in multiple layers in a storage compartment, horizontal frames arranged in multiple layers, the horizontal frames respectively supporting the item storage units, a vertical frame coupled to each of the horizontal frames, the vertical frame extending vertically, first rail units arranged in multiple layers, the first rail units respectively supporting the horizontal frames so that the horizontal frames is movable in a front-to-back direction relative to the storage compartment, a link to connect any one of the horizontal frames arranged and the door to each other so as to move the horizontal frames in the front-to-back direction in response to rotation of the door, and a second rail unit located between the item storage unit and the horizontal frame arranged in the same layer so as to movably support the item storage unit in the front-to-back direction.
US10145586B2
A flameless heater includes a diesel engine, a hydraulic or electric load that is powered by the diesel engine thereby generating heat, a heat exchanger that transfers heat to air flowing through the air from the flameless heat source, and possibly other heat exchangers for heating the air flowing therethrough with engine coolant and/or with exhaust gases. The system may be operated to maintain relatively high load on the engine for at least the majority of the time so as to reduce or negate the need for parked regeneration. The system may also control airflow through the system and possibly other system parameters to obtain a given setpoint such as a given discharge air temperature. In one embodiment, airflow through the system is controlled by louvers under the power of an electric motor or other actuator controlled by the system's controller.
US10145585B1
The present invention provides a vacuum heat transfer type efficient solar panel heat absorption system, including a flat plate collector, wherein a heat absorption coil is arranged in the flat plate collector, and a heat absorption coil valve is arranged on the heat absorption coil stretching out from the flat plate collector; a heat exchange coil is arranged in a pressure bearing water tank, a water inlet and a water outlet are formed in the pressure bearing water tank, a vacuum pump is arranged on a heat transfer pipeline, the heat absorption coil, the heat transfer pipeline and the heat exchange coil are all copper tubes, the interiors of the copper tubes are in vacuum states, and heat absorption coating is coated on an outer surface of the heat absorption coil. In the present invention, the interiors of the copper tubes are vacuumized, when a part of energy radiated by the sun is transferred onto the copper tubes in a heat collection plate, this part of energy is directly, quickly and efficiently transferred to a copper coil in the water tank through the copper tubes, as the interiors of the copper tubes are vacuumized, and the polyurethane at the outside of the tubes preserve the heat in the process, the heat transfer efficiency is greatly improved, and the heat loss during the heat transfer of a flowing medium in the tubes in a circulation process is greatly reduced.
US10145579B2
A building automation system may be controlled in response to a natural language voice message. The natural language voice message may be recorded and then sent to a voice command manager via a network. The natural language voice message is then translated into a command recognizable by a building automation controller of the building automation system. Voice recognition software may be used to create a natural language text based message from the recorded natural voice message, and the natural language text based message may then be translated into the command recognizable by the building automation controller. In response to the command, the building automation controller may perform the desired action.
US10145576B2
A method determines values of the airflow measured in the conditioned environment during the operation of the air-conditioning system and selects, from a set of regimes predetermined for the conditioned environment, a regime of the airflow matching the measured values of the airflow. The method selects, from a set of models of the airflow predetermined for the conditioned environment, a model of airflow corresponding to the selected regime and models the airflow using the selected model. The operation of the air-conditioning system is controlled using the modeled airflow.
US10145572B2
An air handling system includes a movable evaporative media section. The movable evaporative media section is movable between a closed position and an open position. When the movable evaporative media section is in an open position, the movable evaporative media section exposes an opening to the air flow and is positioned to allow at least a portion of the air flow in the volume to flow around the movable evaporative media section and through the opening.
US10145568B2
A gas burner for a cooking appliance includes a body defining perimeter and having a plurality of first groups of respective pluralities of first outlets a plurality of second groups of respective pluralities of second outlets. Each of the first outlets respectively defines a first outlet area, and each of the second outlets defines respective reduced outlet areas that are less than the first outlet area. Further, the first groups and second groups are alternately arranged around the perimeter, and a total number of first outlets is greater than a total number of second outlets.
US10145563B2
Method for manufacturing a gas burner of the type comprising a cup, provided with at least one tubular tapered part of a mixer with axial Venturi effect, and shaped to couple with a burner head provided with at least one flame-spreader, wherein said cup is made in a single piece by casting or die-casting in an apposite mold. Such a method comprises, in sequence, the following steps: a) arranging a mold with at least two shells, for casting or die-casting the afore said cup; b) arranging at least one core which could be removably inserted into the respective mold, which has at feast one jutting portion shaped with at least one tubular tapered part of the stickle of the afore said mixer with axial Venturi effect; c) inserting such a core into the mold and closing the afore said at least two mold shells so that the afore said at least one jutting portion of the core is retained, at least partially, at a distance from the opposite inner walls of the closed mold; the core and the mold being shaped so that at least one ending part of such a core replaces, at least partially, part of the perimetrical area of the cup defined by the mold; d) pouring or pressure-injecting molten metal material into the closed mold; e) opening the mold, drawing out the afore said core and then removing the die formed cup after the metal material is solidified; f) applying at least one closing plug to the side hole (or side holes) of the die formed cup which corresponds/correspond to the ending part of the core which replaced part of the perimetrical area of the cup in the mold.
US10145554B2
A lighting apparatus includes a front enclosure and a back enclosure including guide slots formed thereon. A mounting plate including a plurality of LEDs mounted thereon is attached to the back enclosure. A circuit board is attached to the mounting plate. A center extrusion is attached to the back enclosure. A plurality of spaced fin extrusions are attached to the mounting plate and positioned in the guide slots of the back enclosure. Side rails are attached to the mounting plate and back enclosure and spaced from the fin extrusions. The plurality of spaced fin extrusions and side rails allow passage of air in an upward direction between the spaced extrusions and side rails transferring heat generated from the lighting apparatus to the air.
US10145546B2
A lighting unit in which an electronic assembly is sealed within a watertight package. The electronic assembly has a PCB with a top side to which LEDs, an on/off switch and electronics are mounted and powered by a battery which may be mounted to the underneath side of the PCB. The watertight package is formed by sealing a first member to a second member, with the electronic assembly being sealed within it in a cavity and oriented so that its top side is more proximate the bottom housing than the underneath side, while a transparent space is created between the bottom housing and the LEDs, and the on/off switch can be actuated by pressure. The lighting unit can be used with a light effect material so as to create a light material viewing effect.
US10145544B2
A lighting system for a drilling rig including a lighting frame attachable to a crown of the drilling rig, wherein the lighting frame includes a fixed or adjustable frame portion attached to the crown of the drilling rig and a light bearing frame portion supported by the frame portion. Also provided is at least one light support post attached to the light bearing frame portion for holding a lighting fixture and at least one lighting fixture attached to each light support post.
US10145537B2
An illumination unit includes a transparent substrate, a light source, a first half mirror, and a mirror. The light source is mounted on the transparent substrate. The first half mirror is disposed on a front side of the transparent substrate. The mirror is disposed on a rear side of the transparent substrate. Light emitted from the light source is repeatedly reflected between the first half mirror and the mirror while being transmitted through the transparent substrate, so as to be output forward from the first half mirror.
US10145526B2
A headlamp module comprises a connecting base, a substrate, and at least two edge-type light emitting diode (LED) units. The at least two edge-type LED units are mounted to opposite surfaces of the substrate facing away from each other. Each edge-type LED unit comprises an LED chip, a wavelength converting layer, and a light reflecting layer. The LED chip comprises a bottom surface, a light emitting surface facing away from the bottom surface, and first sidewalls. The wavelength converting layer covers the light emitting surface and the first sidewalls. The wavelength converting layer converts emitted light to a desired range of wavelengths. The light reflecting layer reflects the converted light toward the second sidewalls, thus expanding the angle and brightness of light around the headlamp module and avoiding an unlit or dark area immediately around the headlamp module.
US10145521B1
An LED strip-shaped lamp with a connecting structure includes a first lamp housing, a plug disposed on the first lamp housing, a second lamp housing coupled with the first lamp housing, and a socket on the second lamp housing coupled to the plug. The plug includes a first magnet disposed at an end of the first lamp housing and a first electrical connector fixed in the first pad. The socket includes a second magnet at an end of the second lamp housing and a second electrical connector fixed in the second pad. When the magnets are coupled, the first and the second electrical connector are coupled to connect electrically. The magnets used in the connecting structure of the LED strip-shaped lamp of the present invention can be used as a structure for connecting the first and second lamp housing so as to simplify the connection of the strip-shaped lamps.
US10145516B2
An LED light tube assembly comprising an LED light tube with an LED array board in a tubular housing, and an end cap with a driver board removably secured to the end of the LED light tube. The driver board extends from a cap midpoint at a first level corresponding to an underside of the LED board in the tube, and the cap includes a connector tongue spaced from and parallel to the driver board at a second level corresponding to a portion of the sidewall of the tubular housing. The driver board further includes spring terminals that frictionally engage an upper surface of the LED board as the cap is assembled to the light tube, while remaining assembly and connection forces are borne by the cap and the tubular housing.
US10145515B2
Embodiments of invention are directed to a lighting device for use in accent lighting applications. In one embodiment, the lighting device includes a coherent light source, such as a laser, and a diffractive optical element. The diffractive optical element may be, for example, a holographic optical element. The lighting device may be adapted to retrofit into a pre-existing light fixture. In one application, the lighting device may project a static or movable star field and/or static or movable clouds.
US10145513B2
Cryogenic device comprising at least two chambers at two different temperatures, a first chamber at a first temperature T1 accommodating a sample, and a second chamber at a second temperature T2 greater than T1 and being adapted to accommodate a cooling device, said cooling device being adapted to cool wirelines connecting said sample to an external element detector, wherein said cooling device is an IMS thermalization plate comprising at least one wire-guide having an input for plugging a wire line connected to the sample and an output for plugging a wire line connected to said external element, said wire-guide being thermally connected to the first chamber.
US10145512B2
A compressed natural gas storage and dispensing system having descending pressure bulk storage banks in fluid communication with a supply source for CNG and dispensing storage banks in fluid communication with the descending pressure bulk storage bank, both banks being in fluid communication with fuel dispensers, wherein the delivery pressure of the CNG during, simultaneous refueling of CNG powered vehicles is equalized.
US10145511B2
A gas filling apparatus for filling a plurality of gas storage vessels with a gas, the apparatus comprising a plurality of gas filling ports, each port configured to introduce gas into one of the gas storage vessels, and a controller configured to supply gas to the gas filling ports for filling the vessels and to control the supply of gas to all of the gas filling ports based on a property of any one of the vessels.
US10145509B2
Provided is a hydrogen station that is used to charge hydrogen to a hydrogen tank mounted on a vehicle, the hydrogen station including: a compressor that compresses hydrogen; a lubricant cooling unit that cools the lubricant of the compressor while circulating the lubricant; a hydrogen cooling unit that is capable of cooling hydrogen which is not charged to the hydrogen tank mounted on the vehicle yet and is compressed by the compressor; a sensor that detects whether the vehicle approaches or reaches the hydrogen station; and a startup unit that starts up at least one of the lubricant cooling unit and the hydrogen cooling unit by a signal from the sensor.
US10145507B2
A wearable load redistribution system can include a base support structure and a thoracic frame configured to surround an upper torso of a wearer of the system. The base support structure can include a support frame and a plurality of support members disposed at distal ends of the support frame. The thoracic frame can include a coupling structure, a front plate, and a plurality of struts. A connector member can removably connect the coupling structure to the support frame. The plurality of struts is mated to the front plate to redistribute a weight of the front plate away from shoulders of the wearer and towards the base support structure.
US10145505B2
An anchoring system (10) comprising an anchor (12) and a pin member (14). The anchor (12) comprises a body (16) configured to be inserted in a support surface (18). The body (16) provides an elongate passage ((22) configured to receive and support the pin member (14). The elongate passage (22) provides an open end (30) providing an opening (32). The opening (32) is provided for receiving an end (34) of the pin member (14) therethrough. The anchor (12) and pin member (14) provide a fastening arrangement (36) for fastening the pin member (14) within the passage (22), when the pin member (14) is inserted through the opening (32) into position within the passage (22).
US10145501B2
A deresonated fluid system may include a pressurizable fluid line having distal, opposite line ends with the fluid line extending between the line ends. A source may be configured to apply variations in pressure of fluid in the fluid line having a frequency appropriate for producing a standing wave in the fluid line between the line ends. A fluid coupler having opposite first and second coupler ends may be attached to the fluid line in a medial portion of the fluid line between the line ends. A flow acceleration ramp may be formed about an inside of the first coupler end. An artificial acoustic shoulder may be formed about an inside of the second coupler end. The artificial acoustic shoulder may define a substantially central orifice in fluid communication with the flow acceleration ramp.
US10145500B2
A hopper tee having a horizontal portion through which granular material is unloaded from a tank trailer or hopper car, the hopper tee integrally forms a vertical segment, that secures with the bottom of the hopper, to provide for unloading of granular material for usage or storage. The upper front portion of the tee, as it transitions from its vertical segment to the horizontal flow path has secured or cast therewith a ledge, that provides for accumulation of the unloading granular material therein, to function as a wear pad to resist against abrasion and accelerated wear out of the tee, at that location, during prolonged usage.
US10145499B2
A metallic flange connection gasket to be used for sealing between flanges on pipes or between attractable pipe flange and flange of an operational unit, e.g. pump or valve, the gasket exhibiting at least a pair of circling first ridges, the ridges thereof protruding from opposite faces of the gasket, right opposite to each other, and at least one first valley being adjacent a respective one of the first ridges and recessed in a respective face of the gasket. The gasket has mutually unitary portions consisting of a radially outer portion having a first thickness, a first, radially inner portion radially inwards of the outer portion, and a second, radially inner portion radially inwards of the first inner portion, the inner portions both exhibiting a second thickness being larger than the first thickness. At a transition between the radially outer portion and the first, radially inner portion, as well as at a radially inner end of the radially inner portion close to a radially inner circumference of the gasket there is provided with a second pair of oppositely located ridges and a third pair of oppositely located ridges, respectively. The at least first pair of ridges constitutes a primary seal of the gasket, and the second and third pair of ridges constitute a secondary seal of the gasket.
US10145494B2
An air, acoustic and/or fire sealing device comprising an air, acoustic and/or fire sealing insert body comprising molded foam material, the body having a first end and a second end and a bulk continuous with the first end and the second end; wherein the body has an outer diameter, and the body is adapted to allow one or more pipes, fibers and/or cables to pass through the first and second ends and the bulk; and, a flexible hollow sleeve having an inner diameter, a first open end and a second open end, the ends being axially arranged; wherein the outer diameter of the air, acoustic and/or fire sealing insert body is greater than, equal to, or less than, the inner diameter of the flexible hollow sleeve; and, the air, acoustic and/or fire sealing insert body is arranged in the sleeve, is disclosed.
US10145480B2
An automatic ring valve comprising a valve seat provided with a plurality of gas flow passages arranged according to at least one annular row, at least a shutter comprising at least one ring-shaped portion for selectively closing and opening the gas flow passages, wherein the ring-shaped portion of the shutter comprises a fiber-reinforced matrix, at least one contrasting member for contrasting an opening movement of ring-shaped portion of the shutter, wherein the ring-shaped portion of the shutter comprises continuous fibers, at least some of the fibers developing for at least 360° of the annular development of the ring-shaped portion.
US10145477B2
A valve assembly includes a valve stem having a resilient proximal seal member disposed around the stem and a distal seal member disposed around the stem. The proximal and distal seal members are axially separated from one another along the valve stem. The assembly further includes a housing defining a valve chamber, in which the valve stem is confined so as to be axially displaceable within the valve chamber. The housing defines a first portion of the valve chamber, in which the proximal seal member resides, a second portion of the valve chamber, in which the distal seal member resides, and a cross-bore chamber, which opens into the valve chamber in a third portion between the first and second portions. The third portion has a minimum cross-sectional diameter greater than the cross-sectional diameter of the first portion.
US10145473B2
A gasket for sealing a compartment between a fixed and a roto-translatory member. The gasket has a metal support ring adapted to be connected to the fixed member; first sealing means in a position adjacent to a first ambient containing lubricant and defining two first annular sealing lips axially spaced to cooperate with the roto-translatory member and to counter the passage of lubricant/external contaminants between the first ambient and a second ambient connected with the outside; and second sealing means axially interposed between the first sealing means and the second ambient and defining a second sealing lip axially spaced from the first annular sealing lips and adapted to cooperate with the roto-translatory member to counter the passage of external contaminants towards the first sealing lips; the first sealing means comprise two first distinct sealing rings, axially arranged side by side and respectively carrying a relative first sealing lip.
US10145470B2
A continuously variable transmission (CVT) for use with a torque generating mechanism includes an input member connectable to the torque generating mechanism, an output member, a variator assembly, and a controller. The controller is programmed to control a change-of-mind shift of the CVT requesting a transition from an initially-requested shift to a next-requested shift before completion of the initially-requested shift. Additionally, the controller is programmed to execute a method by detecting the change-of-mind shift, determining an acceleration profile of the input member for the change-of-mind shift using a calibration map indexed by a starting and target ratio of the variator assembly, and calculating a required ratio of the input and output pulleys using the acceleration profile. The controller then commands a clamping pressure of the variator assembly to thereby achieve the calculated required ratio. A vehicle includes an engine and the CVT noted above.
US10145469B2
A method of parameterization of traction force interrupted shifts in a transmission of a commercial vehicle having a frame, a cab supported by the frame, and a trailer coupled to the frame. The method includes a mathematical model which considers movement equations and geometrical parameters of the frame, the cab, and the trailer. Traction force patterns of traction force interrupted shifts are predetermined which depend on a traction force decrease time, a shift time, and a traction force increase time. From model and force patterns, vibration behaviors of the cab as the output parameter of the model is simulated. The parameterization of traction force interrupted shiftings takes place such that, as the shifting parameters, the traction force decrease time, the shift time, and the traction force increase time of such force patterns are determined, for which a defined evaluation criterion of the simulated vibration behavior of the cab is optimal.
US10145459B2
The wave generator of the strain wave gear device comprises: a rigid plug; a roller bearing fitted on the elliptical outer circumferential surface thereof; and first and second cylindrical springs, which press loose rollers that have some play in the radial direction between the outer race and the inner race of the roller bearing against the outer raceway surface. The loose rollers are pressed against the outer raceway surface with a linear contact and roll according to the outer raceway surface. Skewing of the rollers is limited, ensuring smooth rotation of the roller bearing.
US10145457B2
A pendulum damper device includes a rotary member rotatable about a rotational axis. The rotary member includes a plurality of guide groove parts circumferentially aligned. The pendulum damper device also includes a plurality of pendulum units supported by the guide groove parts. The pendulum units swing along the guide groove parts so as to attenuate vibration when the rotary member is rotated. In addition, the pendulum damper device includes a plurality of stoppers mounted to the rotary member. Each of the stoppers is contacted to a part of each of the pendulum units so as to restrict a swing range of the each of the pendulum units.
US10145456B2
A hydrodynamic converter has a working chamber through which an operating medium can flow. A pump wheel is connected to a drive shaft and a turbine wheel is connected to a driven shaft. At least one positioning blade can be adjusted by an adjustment device. In order to provide a compactly formed and robust hydrodynamic converter of this type, having a hard-wearing adjustment device for adjusting at least one positioning vane, the adjustment device includes an actuating drive with ring elements. Each ring element is disposed coaxially in relation to the drive shaft. A first ring element is connected to the at least one positioning blade for transmitting a positioning force or a positioning torque via a diverting device. The first ring element can be rotated relative to a second ring element in the circumferential direction of the drive shaft.
US10145450B2
Electric motors are disclosed. The motors are preferably for use in an automated vehicle, although any one or more of a variety of motor uses are suitable. The motors include lift, turntable, and locomotion motors.
US10145447B2
The present invention relates to a frictional power transmission belt having a frictional power transmission surface covered with a warp knitted fabric, in which the warp knitted fabric contains a water absorptive thread in a proportion of 30% by mass or more based on the total amount of threads constituting the warp knitted fabric and a wale direction of the warp knitted fabric is substantially parallel to a belt longitudinal direction.
US10145436B2
The present disclosure relates to a rear shock absorber for a vehicle. The shock absorber may include a first end and a second end that slide telescopically relative to one another. A piston may be placed in fixed position relative to one of the ends. The first side of the piston may partially define a first chamber filled with a compressible fluid. The second side of the piston may partially define a second chamber filled with a substantially incompressible fluid. The substantially incompressible fluid may be under pressure and may lubricate a seal substantially surrounding a periphery of the piston.
US10145435B2
A shock absorber includes a gas spring cylinder containing a piston moveable between an extended position and a compressed position within the gas spring cylinder. A mechanical actuator is arranged whereby a bleed port is automatically closed when the gas spring is compressed to a predetermined position corresponding to a desired sag setting. In one embodiment, the position corresponds to a predetermined sag setting whereby the gas spring is partially compressed. In another embodiment, a proper sag setting is determined through the use of a processor and sensor that in one instance measure a position of shock absorber components to dictate a proper sag setting and in another instance calculate a pressure corresponding to a preferred sag setting.
US10145431B2
A parking brake, particularly for a vehicle, includes a brake piston, supported to be movable along a longitudinal axis between a braking position and an open position, by which a brake disk is immobilizable by applying a braking force, when the brake piston is in the braking position, a drive unit for moving the brake piston along the longitudinal axis, and a toggle lever interacting with the brake piston and having at least first and second legs. The first and second legs are connected rotatably with a joint element and are actuatable by the drive unit, such that the toggle lever provides the braking force and applies it to the brake piston. An immobilizing device having such a parking brake, as well as a vehicle having the immobilizing device, and a method for immobilizing a vehicle by such an immobilizing device are also provided.
US10145428B2
A coupling assembly having an overrun mode and a channeled locking member are provided. The locking member has a ramped, open channel extending through a nose and main body of the locking member to an upper face of the main body. The locking member is movable between first and second positions. The first position is a coupling position and the second position is an uncoupling position. Pressurized fluid directed to a bottom of the channel urges the locking member towards the second position upon rotation of a first member of the assembly in a first direction relative to a second member of the assembly above a predetermined RPM to prevent abutting engagement of the locking member with a shoulder of the first member in the overrun mode.
US10145424B2
A two dimensional structure such as a disk or belt is shaped or distorted to form a buckling wave. At least one contact touches the wave, with two contacts squeezing the wave between them providing a firmer connection. The wave is propagated along the structure by any of a variety of means including magnets or piezo actuators. This movement of the wave moves the contacts relative to the two dimensional structure, providing a high leverage ratio.
US10145423B2
A device (10) for uncoupling a vehicle's wheel shaft drive, which device is intended to be placed close to a drive shaft (11) in order to uncouple/couple a driven unit to which the drive shaft (11) is coupled. The device (10) comprises includes at least one bearing (12) fitted around the end (13) of the drive shaft (11). A carrier (14) coupled to the unit or to the drive shaft, has an inner cavity large enough to surround the drive shaft's end (13) and the bearing (12) and is fastened in the bearing (12) so as to be freely rotatable relative to the drive shaft (11). A coupling ring (15) is coupled rotationally to the drive shaft (11) and is movable axially relative to the drive shaft (11). A coupling fork (17) at least partly surrounds the coupling ring (15) and is movable axially relative to the drive shaft (11). An activating device which acts upon the coupling fork (17) to move the latter in axial directions along the drive shaft (11). Coupling the drive shaft (11) to the unit involves the coupling fork (17) and the coupling ring (15) being moved axially towards the carrier (14) by the activating device (20) so that the drive shaft (11) becomes rotationally coupled with the carrier (14) and the unit via the coupling ring (15).
US10145421B2
The present invention relates to a combustion engine which includes at least one crankshaft rotating about a first rotation shaft; at least one output shaft outputting an engine torque, said output shaft rotating about a second rotation shaft separate from said first rotation shaft; at least one transmission assembly rotating about said first rotation shaft and being rotated by said crankshaft in order to transmit said engine torque to said output shaft.
US10145416B2
A bearing cage for receiving rolling elements is disclosed. In addition to two rings, the bearing cage also has a plurality of webs which run axially between the rings. In order to prevent the rolling elements from falling out of the pockets formed between the rings and the webs, the webs have a groove which runs in the direction of the respective web. When the rolling elements are inserted into the pockets, a tool engages into the groove and bends the edge region of the web in a direction of the rolling elements.
US10145410B2
The assembly includes a housing with an inner bore that extends along an axis. A stud is at least partially disposed in the inner bore of the housing and is pivotable relative to the housing. A top edge of the housing is bent radially inwardly to present a flange. A two-piece dust boot is provided including a cover piece of an elastic material and a spring washer. The cover piece extends from a first end portion that is sealed against the housing to a second end portion that is sealed against the stud. The spring washer is at least substantially encapsulated within the cover piece at the first end portion and biases the cover piece against the flange of the housing to establish a seal that is resistant to compression setting between the cover piece and the housing.
US10145409B2
There is provided a bearing apparatus of a crankshaft for an internal combustion engine. The bearing apparatus includes a crankshaft having a plurality of journal portions and a plurality of crank pin portions; a main bearing supporting the crankshaft; and a bearing housing holding the main bearing. The plurality of journal portions include a first journal portion having a lubricating oil passage and a second journal portion not having the lubricating oil passage. The first and second journal portions and are supported by the first and second main bearings and. The bearing housing includes an Al alloy upper housing and an Fe alloy lower housing. The groove depth of the oil groove of the upper half bearing of the second main bearing is one half or less than the groove depth of the oil groove of the upper half bearing of the first main bearing.
US10145408B2
A hook for lifting a component is described herein. The hook includes a coupling portion configured for coupling to a chain, and a base extending from the coupling portion. The base defines an opening sized to receive a first portion of the component therein, and includes an extension extending from a lower surface of the base. The extension at least partially defines a notch sized to receive a second portion of the component therein. The extension is oriented to engage the second portion of the component to facilitate maintaining the hook in an upright orientation.
US10145405B1
A self-tapping insert has at least one interior die slot which repairs damaged threads on a fastener used with the insert. The self-tapping insert is used for providing replacing threads in a workpiece. The self-tapping insert has a cylindrical body with a top and a bottom, an exterior portion and an interior portion. The exterior portion has a cutting thread wrapped around the exterior surface, where the cutting thread sequentially intersects a cutting slot disposed in a generally axial orientation along the exterior portion. The interior portion has a screw thread for receiving the fastener. The screw thread intersects the die slot having a die slot leading edge and a die slot trailing edge. A screw thread leading edge is defined by each sequential intersection of the screw thread with the die slot leading edge and a screw thread trailing edge is defined by each sequential intersection of the screw thread with the die slot trailing edge.
US10145403B2
A joining process is proposed for connecting a first component to a second component, whereby in a first process the first component and the second component and an adhesive material arranged between the first and the second component are prepared, whereby in a second process the first and the second components are pressed together and whereby in a third process the adhesive material is hardened and further whereby spacing means are added to the adhesive material and these are at least partially resorbed in the third process by the adhesive material.
US10145400B1
A clip configured to releasably secure opposing halves of a fiberglass shroud surroundably mounted to a cellular tower. The clip includes a first tube member and a second tube member wherein the second tube member has a diameter that is less than that of the first tube member. The second tube member is slidably coupled with the first tube member wherein the second tube member is partially disposed within the interior volume of the first tuber member. A first post and a second post are distally mounted and each have a portion extending into the first tube member and second tube member respectively. A spring is present within the interior volume of the first tube member and second tube member and is operably coupled to the first post and second post. The first post and second post have angular portions configured to help maintenance of the clip's position.
US10145398B2
A quick release mechanism for non-releasable clips is disclosed. The quick release mechanism allows for improved testing of the dimensional quality of manufactured parts having non-releasable mounting features, including clips, plugs, and pins. The mounting features can be reliably mounted for testing, and then removed from a mounting fixture without causing any injury or damage to the non-releasable mounting feature present in the device. The ease of removal is provided by the use of two horizontal segments (108, 110) positioned in a housing (104) to form a receiving aperture (112) for the mounting feature of the tested device. Moreover, the utilization of cables and cable stops to position and hold the horizontal segments of the quick release mount within their housing allows for a tested device to be quickly removed and the horizontal segments to be easily repositioned inside the circular housing where they can accept another manufactured device for dimensional evaluation.
US10145394B2
A hydraulic cylinder includes a rod inner passage that is formed in a piston rod along an axial direction and communicates a fluid pressure source and an interior of a cylinder tube; a plug that is inserted from an open end that opens to the interior of the cylinder tube of the rod inner passage; a lateral hole that is formed in the piston rod along a radial direction and extends so as to cross the rod inner passage; and a pin that is inserted into the lateral hole. In the piston rod, an inner-circumference screw portion is formed on an inner circumference of the rod inner passage, and on the plug, an outer-circumference screw portion that is screwed into the inner-circumference screw portion and an engagement portion that is engaged with the pin and locks rotation of the plug are formed.
US10145391B2
A fluid pressure control device for a construction machine includes a first circuit system connected to the first pump; a second circuit system connected to the second pump; a switching valve having a normal position, a straight traveling position and a merging position where the working fluid of the branch section is merged into the second neutral passage; and an open/close mechanism configured to open/close the first neutral passage. In a case where at least one of the control valves, on which merging is required, on the downstream of the second traveling control valve is switched to a position other than the neutral position, by closing the first neutral passage by the open/close mechanism and switching the switching valve to the merging position, the working fluid of the first pump is merged into the working fluid of the second pump.
US10145386B2
A fan motor assembly capable of improving efficiency of a motor by minimizing flow loss, and a vacuum cleaner having the same includes a case, a motor installed inside the case to form a suction force, an impeller rotatably installed on a shaft of the motor, and a guide fan configured to guide air that is suctioned by the motor, wherein the guide fan includes a first guide unit configured to increase pressure of the suctioned air and a second guide unit provided at an upper side of the first guide unit to be in contact with the case.
US10145381B2
A centrifugal compressor includes a driving shaft (2) which is rotationally driven, a driving gear (11) which is connected to the driving shaft (2), a driven gear (12, 13) to which rotation of the driving gear (11) is transmitted, a driven shaft (3) which extends toward both end sides in a center axis direction of the driven gear (12, 13), a first compression portion (41) which is provided on a first end portion side in the center axis direction of the driven shaft (3), a second compression portion (42) which is provided on a second end portion side in the center axis direction of the driven shaft (3), and a pressure adjustment portion (7) which uniformly adjusts a pressure of a space of a discharge side of a fluid in the first compression portion (41) and a pressure of a space of a discharge side of a fluid in the second compression portion (42).
US10145368B2
A pump volume control apparatus includes: a tilting piston; a pump volume switching valve configured to adjust a tilt driving pressure by a movement of a spool; a flow rate control spring configured to bias the spool in accordance with a tilt angle; a horsepower control piston configured to move in accordance with a pump discharge pressure; and a horsepower control spring configured to bias the horsepower control piston in accordance with the tilt angle. The tilt driving pressure is adjusted by means of the movement of the spool in accordance with a force acting on the spool in response to a flow rate controlling signal pressure in a flow rate controlled state, and is adjusted by means of the movement of the spool in accordance with a force acting on the horsepower control piston in response to the pump discharge pressure in a horsepower controlled state.
US10145367B2
A piston pump configured to suction and discharge a working fluid includes a plurality of pistons, a cylinder block accommodating the pistons, a shaft combined with the cylinder block, swash plate configured to reciprocate the pistons in accordance with rotation of the cylinder block, a casing accommodating the cylinder block, and a valve plate placed between the cylinder block and the casing. The valve plate has a suction port providing communication between capacity chambers and a suction passage, and the suction port is a cutout part formed by cutting out an outer edge of the valve plate.
US10145364B2
A device for fastening and/or guiding strand-shaped elements, in particular cables or cable bundles wind turbines includes retaining bodies (5) combinable with a supporting structure (3) in the form of a star body to form a modular fastening system, having a strand passage (31) for a strand element. Each retaining body has two partial bodies (25 and 27), each of which has a part (29) of the strand feedthrough (31). Between surfaces (13) of consecutive spokes (9) of the star body of the supporting structure (3) extending parallel to each other, installation spaces (21) for retaining bodies (5) are formed. The installation spaces are open towards the outside of said star body and have sides that are parallel to each other, A retaining device (59, 61, 63) is provided between each partial body (25, 27) and the spoke (9) adjacent to it. The partial bodies (25, 27) can be detachably fastened in the installation position on the supporting structure (3) and in contact with each other such that the retaining body (5) is completed.
US10145362B2
A method of handling a direct drive generator of a wind turbine is provided. The direct drive generator comprises a stator and a rotor concentrically arranged about an axis of the direct drive generator. The method includes steps of placing the direct drive generator on a support structure, fixing a selected one of the stator or the rotor to the support structure, connecting actuator means to a remaining one of the stator or the rotor, and rotating the remaining one of the stators or the rotor using the actuator means.
US10145361B2
A wind turbine system is presented. The wind turbine system includes a wind turbine comprising a plurality of blades and a tower, and a processing subsystem configured to shut down the wind turbine by non-linearly pitching out the plurality of blades in the wind turbine towards a feather position at a pitch rate determined based upon a tower-fore-aft velocity of a top-portion of the tower during oscillations of the tower.
US10145360B2
A method for monitoring the operation of a wind energy plant having at least one blade angle adjustable rotor blade. Rotor blade vibrations are registered during operation by at least one measuring device, and at least one current natural frequency is established from the registered vibrations. At least one environmental parameter and/or at least one operational parameter, which influence the natural frequency of the rotor blade, is or are additionally registered. At least one natural frequency expected value dependent on the additionally registered parameter(s) and at least one confidence interval are calculated for the at least one established current natural frequency of the rotor blade, and whether the established current natural frequency lies within, or outside of, the confidence interval around the natural frequency expected value is monitored. Also disclosed is an operational control apparatus of a wind energy plant and a corresponding wind energy plant.
US10145355B2
A turbine that has a plurality of compartments. Each compartment has associated thereto a respective opening. Each opening defining a fluid communication path between an outside of the turbine and a respective compartment. The turbine also has a plurality of conduits. Each conduit connects a respective compartment to an adjoining compartment. Each conduit defines a fluid communication passageway between the respective compartment and the adjoining compartment. The turbine is configured for immersion in liquid and for powering by gas displacing some of the liquid out of one or more than one compartment. The present disclosure also describes a method of driving such a turbine.
US10145352B2
In a general aspect, an ignition circuit can include a control circuit configured to receive a command signal from an engine control unit, and a driving circuit coupled with the control circuit. The driving circuit can be configured to be coupled with a resonant circuit that includes a primary winding of an ignition coil. The control circuit and the driving circuit can be configured, in response to a command signal, to drive the resonant circuit at a first frequency to generate a voltage in the ignition coil to initiate a spark in a spark plug; and, in response to the spark being initiated in the spark plug, drive the resonant circuit at a second frequency to maintain the spark in the spark plug for combustion of a fuel mixture. The control circuit can be configured to, after the combustion of the fuel mixture, to disable the driving circuit.
US10145334B2
A container-type compressed air storage power generation device (2) comprises compressors (5a-5c); a tank (8); power generators (9a-9c); a control device (12); and a container (4). The compressors (5a-5c) compress air. The tank (8) is driven by air supplied from the compressors (5a-5c). The power generators (9a-9c) are driven by air supplied from the tank (8). The control device drives and controls the compressors (5a-5c) and the power generators (9a-9c). The container (4) houses the compressors (5a-5c) and the power generators (9a-9c), and the tank (8) is disposed outside the container (4). Therefore, the container-type compressed air storage power generation device (2) is easy to transport and construct on-site.
US10145320B1
Methods and systems are provided for controlling boost pressure and exhaust gas recirculation in a split exhaust system. In one example, a first portion of exhaust may be routed from a cylinder to an exhaust turbine via a first exhaust valve and a second, remaining portion of exhaust may be routed as exhaust gas recirculation (EGR) via a second exhaust valve, the timing and lift of each of the first valve profile and the second valve profile adjusted based on boost error and EGR error. Further, motor torque from an electric motor may be supplied to the turbocharger to attain a desired boost pressure and a desired EGR flow.
US10145318B2
A drive unit for a motor vehicle includes an internal combustion engine having a feeder line for feeding combustion air to the internal combustion engine and a compressor device that cooperates with the feeder line and by means of which the combustion air is compressed for the internal combustion engine. A bypass line opens into the feeder line, and through which the combustion air can be fed to the internal combustion engine without passing through the compressor device. An isolating mechanism associated with the bypass line serves to shut off and/or adjust the quantity of combustion air that flows through the bypass line. A control unit controls the isolating mechanism in such a manner that the isolating mechanism is at least partly closed or is caused to at least partly close when the internal combustion engine is in coasting mode.
US10145310B2
A flap device for an internal combustion engine includes a flow housing which delimits a flow duct, a shaft which rotates and which is supported on one side thereof, a flap body attached to the shaft in the flow duct, an actuator which rotates the shaft and thereby the flap body, an actuator housing having the actuator arranged therein, a first bearing seat formed on the flow housing, a first bearing arranged in the first bearing seat to radially surround the shaft, a second bearing, a chamber which surround the shaft, and a bore arranged to open into the flow duct from the chamber. The shaft protrudes into the actuator housing. The shaft is supported on the one side via the first bearing and via the second bearing. The chamber from which the bore opens into the flow duct is arranged between the first bearing and the second bearing.
US10145301B2
An inlet for a turbofan engine, including an inlet wall surrounding an inlet flow path. The inlet wall extends axially from an upstream end to a downstream end adjacent the fan. The inlet wall has a shape defining a plurality of teeth circumferentially spaced around the inlet. The teeth extend axially and project radially inwardly toward the central longitudinal axis. A central portion of the inlet flow path has a cross-sectional dimension measured diametrically between opposed teeth, the cross-sectional dimension varying along the axial direction. The central portion defines a geometric throat at a minimum value of the cross-sectional dimension. The inlet wall is shaped so that the geometric throat is axially spaced from the upstream end and the downstream end. A gas turbine engine and a method of shielding tips of fan blades from impact by an object having a predetermined minimum dimension are also discussed.
US10145295B2
The invention relates to a plate heat exchanger forming between its plates a first flat flow tube in which a first fluid circulates between a first inlet orifice and a first outlet orifice, and a second flat flow tube in which a second fluid circulates between a second inlet orifice and a second outlet orifice. The two flat tubes form parallel arms which extend in a longitudinal direction (L) perpendicular to a transverse air flow traversing the heat exchanger, the first tube being upstream in the air flow and the second tube being downstream.
US10145278B2
A blow-by gas passage structure is provided inside a separator chamber that is formed between a cylinder head cover and a baffle plate joined to the cylinder head cover by vibration welding. A first rib is provided on the opposite surface of one member of the cylinder head cover and the baffle plate, while a second rib is provided on the opposite surface of the other member, at positions upstream of the first rib in the flow of the blow-by gas and adjacent a gap formed between the distal end of the first rib and the opposite surface of the other member. The second rib has a height that is equal to or larger than the height of the gap so as to prevent passing of the blow-by gas through the gap.
US10145276B2
An exemplary method of monitoring a position of a lubricant valve in a gas turbine engine includes monitoring a position of a lubricant valve using a first auxiliary pressure reading and a second auxiliary pressure reading. The first auxiliary pressure reading is taken when a primary lubrication circuit is at a first pressure. The second auxiliary pressure reading is taken when the primary lubrication circuit is at a second pressure. An exemplary assembly that detects transitions of a lubricant valve in a gas turbine engine includes a controller that uses readings of the primary pressure and readings of the auxiliary pressure to detect a position of a lubricant valve.
US10145274B2
An internal combustion engine is provided with a DOHC-type valve train in a cylinder head. The valve train includes an intake side camshaft with an intake side driven gear, and an exhaust side camshaft with an exhaust side driven gear. The cylinder head supports therein a spindle with an idle gear with an idle chain sprocket fixed thereto. The idle gear is in meshing engagement with both the intake and exhaust side driven gears. Rotary power of a crankshaft is transmitted via a cam chain to the idle gear to rotate both the intake and exhaust side camshafts. These camshafts are supported by bearings of a bearing wall and a camshaft holder. These bearings and camshaft holder are located, for compact arrangement, at a position axially coinciding or overlapping with the idle chain sprocket.
US10145267B2
An object is to reduce loss of exhaust gas by improving a surface roughness to enhance efficiency of a turbocharger and to reduce generation of a crack due to thermal fatigue to improve durability, as well as to ensure rigidity to prevent exhaust-gas leakage to outside. A turbine housing accommodates a turbine wheel rotated by exhaust gas taken in from an engine and includes a scroll part having a scroll shape and forming, on a radially-inner side, an exhaust-gas flow passage. The turbine housing includes: a casted exterior member forming an opening portion accommodating a back-face member attachable and detachable in an axial direction of the turbine wheel; and a sheet-metal interior member disposed inside the exterior member via a predetermined clearance part from the exterior member and forming the scroll part. The interior member is configured to be attachable and detachable with respect to the exterior member through the opening portion.
US10145266B2
A gas turbine engine includes a shaft supported by first and second bearings for rotation relative to an inlet case. The first and second bearings are positioned within a common bearing compartment.
US10145263B2
A nozzle assembly of a turbocharger includes a nozzle and a ring-shaped body. The nozzle has flow passages extending through the nozzle and configured to direct air received from a volute housing of the turbocharger through the nozzle to turbine blades of the turbocharger. The ring-shaped body is coupled with the nozzle and is configured to rotate around the nozzle. The ring-shaped body includes blocking segments that block the flow of the air and openings between the blocking segments that permit the air to flow through the ring-shaped body. The ring-shaped body is configured to rotate relative to the nozzle to change how many of the flow passages in the nozzle are blocked by the blocking segments of the ring-shaped body.
US10145243B2
A rotary engine includes a housing and elliptical rotors mounted to rotor shafts for rotation within a chamber of the housing. A valve disk mounted to a rotor shaft includes a port passing between first and second sides. A valve plate includes a bore defining a cylindrical sidewall for rotationally receiving the valve disk. The valve disk includes a groove disposed in a wall, and includes a ring member disposed in the groove that contacts the sidewall of the bore when the valve disk is disposed in the bore. The apparatus may include multiple valve disks disposed in separate bores to operate as exhaust or intake valves. Circumferential channels may be included in the bore sidewalls within which the ring members are disposed.
US10145230B2
Systems and methods for improved monitoring of downhole pump conditions may provide real-time monitoring, high accuracy, and low noise when monitoring downhole pump conditions. Systems for monitoring pump conditions may be coupled to any suitable sucker rod pump, and may gather desired data from the pump. The desired data may be gathered at several points-in-time during a pump stroke to provide real-time monitoring. A wave equation corresponding to the behavior of the downhole pump may be solved when the desired data is received to provide real-time monitor. In some embodiments, the wave equation may be solved by separating it into static and dynamic solutions. In some embodiments, the dynamic solution of the wave equation may be solved utilizing an integral-based method.
US10145227B2
An embodiment in accordance with the present invention includes a method for estimating the permeability of fractured rock formations from the analysis of a slow fluid pressure wave, which is generated by pressurization of a borehole. Wave propagation in the rock is recorded with TFI™. Poroelastic theory is used to estimate the permeability from the measured wave speed. The present invention offers the opportunity of measuring the reservoir-scale permeability of fractured rock, because the method relies on imaging a wave, which propagates through a large rock volume, on the order of kilometers in size. Traditional methods yield permeability for much smaller rock volumes: well logging tools only measure permeability in the vicinity of a borehole. Pressure transient testing accesses larger rock volumes; however, these volumes are much smaller than for the proposed method, particularly in low-permeability rock formations.
US10145226B2
A system and method of production of hydrocarbons, such as heavy oil or bitumen, by injection of steam, solvent and NCG is provided, which combines the benefits of SAGD, VAPEX, and the use of an additional producer, with specific timing specifications for the initiation of solvent injection prior to inter-chamber fluid communication.
US10145224B1
A system to provide power to a tool includes an electric motor that can operate at rotary speeds of at least 6,000 rpm, a variable speed drive electrically connected to the electric motor, and a step-up transformer electrically coupled to the electric motor and the variable speed drive, in which the variable speed drive can generate and transmit a drive signal to supply power to the electric motor when the electric motor is spaced apart from the variable speed drive by a distance of at least 100 meters, and the transformer can prevent capacitive leakage in the drive signal transmitted over the distance from the variable speed drive to the electric motor.
US10145221B2
A well screen assembly includes an elongate base pipe, a shroud layer about the base pipe, and a mesh layer between the shroud layer and the base pipe. A portion of the mesh layer overlaps another portion of the mesh layer to form an area of overlap. A spine is positioned proximate substantially an entire length of the area of overlap, and transmits a force from the shroud layer to the mesh layer that compresses and seals the area of overlap against passage of particulate.
US10145217B2
A chemical attenuator sleeve for mitigating chemical reaction in a well borehole includes an inner member having a plurality of perforations, a first outer member disposed on an outer circumference of the inner member, a second outer member at least partially enveloping the first outer member, the second outer member having an outer diameter that is greater than an outer diameter of the first outer member, and a chemical composition disposed between the outer diameter of the first outer member and an inner diameter of the second outer member. The chemical composition may include MgO, Mg(OH)2, CaO, Ca(OH)2, NaOH, and mixtures thereof.
US10145216B2
A trip speed table is created containing records. Each record contains a step location, wherein a step is defined to be the location in a well of a deepest end of a drill string, a minimum trip speed for the step location, wherein the minimum trip speed is defined to be the maximum trip speed less than or equal to a default trip speed at which the drill string can be tripped without exceeding a fracture gradient or falling below a pore pressure at a slice depth, and the slice depth where the minimum trip speed for the step location occurred.
US10145209B2
A system, tool and method of providing the tool downhole is disclosed. The tool is conveyed downhole on a tool string. The tool includes a first member and a second member locked in a first configuration by a locking member. The locking member is dissolvable upon introduction of a dissolving agent to the locking member. Dissolving the locking member allows motion between the second member and the first member.
US10145202B2
A T-shaped slip is retained in an opening of a slip ring to drive the slip in opposed directions to and away from the surrounding borehole wall along a cone. The slip ring and cone do not come together when the slip is engaged. The opening allows release of a lock ring first with the slip engaged followed by release of the slip from the borehole wall. The slip ring and cone come together during removal from the borehole. A travel stop on the axial slip movement is provided to prevent guides on the slip from exiting a track or dovetail on the cone when the slip ring and cone are in contact during removal of the plug or packer. Extension of the guide from the cone track can happen if the slip moves through an enlarged portion of the borehole. The travel stop prevents this.
US10145197B2
The present disclosure is directed toward a downhole tool used to free stuck tools in a wellbore and the method of using the downhole tool. The downhole tool includes at least one packer element for engaging a casing in a wellbore. The packer works to isolate one area of the casing from another. The downhole tool also includes at least one slip element for engaging the casing to maintain the position of the downhole tool in the casing or wellbore. Further, the downhole tool includes a mandrel slidably disposed within the at least one packer element and the at least one slip. The mandrel includes at least one port disposed therein above the at least one packer element when the mandrel is in a first position.
US10145196B2
A mud motor for use in a wellbore includes: a stator; a rotor, the stator and rotor operable to rotate the rotor in response to fluid pumped between the rotor and the stator; and a lock. The lock is operable to: rotationally couple the rotor to the stator in a locked position, receive an instruction signal from the surface, release the rotor in an unlocked position, and actuate from the locked position to the unlocked position in response to receiving the instruction signal.
US10145195B2
An assembly for an explosive device for severing a well component is provided. The assembly can include an outer housing. The assembly can also include a radially-nonuniform explosive cartridge disposed within the outer housing, and the radially-nonuniform explosive cartridge can include at least four protrusions.
US10145188B2
An automated rod manipulator system for moving a drill rod section from a storage magazine to a drill rig and connecting the drill rod to a drill string of the drill rig without manual manipulation of any parts. The automated rod manipulator system may comprise a magazine to store and dispense a plurality of drill rod sections, a carriage to convey one of the plurality of drill rod sections from the magazine to a transfer position; and a gripping arm coupled to a drill rig mast of a drilling rig, the gripping arm operable to convey one of the plurality of drill rod sections from a transfer position to a position aligned with a spindle center line of the drilling rig. The automated rod manipulator may also include a control system and an alignment assembly for aligning the drill rod section on a spindle centerline of the drill rig.
US10145186B2
Embodiments of the present disclosure generally relate to an insert in a clamping device or gripping apparatus. The insert may include a gripping element having an elongated body and a plurality of contact features, a first member formed from a hard material, wherein the first member contacts the gripping element in one or more locations, and a second member formed from an elastic material, wherein the second member contacts the gripping element along the elongated body.
US10145183B2
A method is provided for manufacturing a segment of a drill string, such as a tubular tool, from a plurality of layers. The method includes arranging a plurality of layers based on a selected length of the segment. Each of the plurality of layers includes an aperture that is received over an alignment feature that restricts movement of the plurality of layers to two or fewer degrees of freedom. A joining process is performed to join the plurality of layers, which may include at least one replacement layer.
US10145177B2
A diverter assembly can include a diverter having a deflection surface, and an annular seal device externally disposed and longitudinally displaceable on the assembly in response to a pressure differential being applied across the device. A well system can include a diverter assembly positioned in a casing, the assembly including a diverter and an annular seal device that seals off an annulus between the assembly and the casing, whereby a pressure differential across the device is reduced by movement of the device on the assembly. A method of sealing off an annulus formed between a diverter assembly and a casing can include positioning an annular seal device on a mandrel, the device being slidingly and sealingly engaged with an outer surface of the mandrel, connecting the mandrel to a diverter, and installing the assembly comprising the device, the mandrel and the diverter in the casing.
US10145171B2
A covering for an architectural opening has a horizontal movable rail supported by cords, with a variety of configurations which allow the movable rail to be moved up and down while concealing the cords.
US10145170B2
A system for reducing sunlight shining into a vehicle includes a window having an array of liquid crystals switchable between a transparent state and a shaded state. The system also includes an eye position sensor for detecting a location of eyes of a driver and an inertial measurement unit (IMU) for detecting a current heading of the vehicle. The system also includes an electronic control unit (ECU) that may determine a current location of the sun relative to the vehicle based on the current heading of the vehicle and a current time of day. The ECU may also select an area of the window to be shaded in order to reduce an amount of sunlight reaching the eyes of the driver and control liquid crystals within the selected area of the window to switch from the transparent state to the shaded state.
US10145162B2
A damping device includes a housing, a cover assembly, a piston rod, a piston and an elastic member. The housing has an inner wall defining a chamber, and an opening communicated with the chamber. The chamber is filled with a damping medium. The cover assembly is arranged adjacent to the opening of the housing. The piston rod penetrates through the cover assembly. The piston is connected to the piston rod and movable relative to the housing. The piston includes an extension part and an expansion part located between the piston rod and the extension part. A width of the expansion part is greater than a width of the piston rod. The elastic member is arranged in the chamber of the housing, and configured to provide an elastic force to the piston.
US10145153B2
A closing element for a motor vehicle, including an opening mechanism, and a handling element for the closing element actively connected to the opening mechanism such that the closing element can be moved for the purpose of opening. The closing element includes a locking mechanism for locking and/or unlocking the opening mechanism. The locking mechanism can be actuated by a closing system, in particular for the authorization of access to the motor vehicle. A coupling mechanism is provided for interacting with the locking mechanism and/or with the opening mechanism in the manner of an emergency release. The coupling mechanism can be actuated by an actuator. For the operation of the actuator a separate energy storage device is provided that can be used on demand.
US10145150B2
Padlockable security collars are disclosed that each include a chain of elongate, in-series, hinge-connected components that are configured to cooperatively wrap and perimetrically shroud relatively movable elements of so-called “connection assemblies” and the like that have relatively movable members which need to be shrouded and protectively enclosed to prevent unauthorized operation. Holes that can be aligned to permit a shackle of a padlock to extend therethrough are formed through opposite end regions of each security collar's chain of components so the security collar can be locked in place once a compartment-defining component receives, shrouds and protectively encloses the relatively movable members that need to be prevented from being moved or operated while the security collar is locked in place.
US10145146B2
Systems and methods for a tamper-evident cargo container seal bolt lock are disclosed herein. The device can include a receiving member, a conductive bolt member adapted to be snap-locked into the receiving member, and a plastic encapsulant which tethers the bolt member to the receiving member. The encapsulant can contain an electrically conductive medium, such as a wire, which runs from the receiving member to the second end of the bolt. A sensory circuit disposed within the receiving member can be configured to sense whether the circuit has been interrupted (e.g., if the bolt has been cut). In the event of an interruption, the circuit can record the present time and/or date in memory. An RFID transponder disposed within the encapsulant or the receiving member can then transmit the recorded date/time to an RFID interrogator if a dispute subsequently arises as to when the lock had been broken.
US10145142B1
A system of for installing fence posts quickly, accurately, and easily for both side mounted fence panels and front mounted fence panels with one or two persons.
US10145136B2
A filter apparatus is disclosed herein that includes a filter, such as a cartridge, positioned within a housing. The housing includes a lower-section housing and a cover assembly removably attached to the lower-section housing. The filter apparatus has multiple ports and valves, such as a valve associated with the cover assembly, so as to allow a user to easily switch between various operations on a pool filter, such as between a backwash mode and a filtration mode. The filter apparatus also employs a cage positioned around the cartridge, thereby between the housing and the filter. The cage provides additional support to the cartridge so as to reduce wear and tear of the cartridge. The cover is rotatable about the lower-section housing so as to allow a user to position ports on the cover in any direction.
US10145134B2
Aspects herein relate to using motor velocity as feedback for controlling the extension or retraction of jacks for control of the angular orientation of a structure, or other means for accomplishing the same. Embodiments include a structure orientation control apparatus comprising one or more jacks configured to support a structure, one or more jack drive mechanisms coupled to at least one of the one or more jacks, the one or more jack drive mechanisms configured to extend or retract the one or more jacks, and a jack controller configured to cause the one or more jack drive mechanisms to extend or retract the one or more jacks based on a jack command. The jack controller may be configured to monitor one or more jack velocities during extension or retraction.
US10145130B1
A sealing structure for the bottom of a beam space between precast panels, comprising: a first precast panel and a second precast panel substantially aligned to each other along a single plane and spaced from each other by a space, each of the first precast panel and the second precast panel defining an inner edge adjacent to the space; a soft pad abutting the space for sealing a bottom of the space; a plate abutting the soft pad; a fastening device securing a first side of the plate and a second side of the plate to the first precast panel and second precast panel, respectively, so as to assist the soft pad in the sealing of the bottom of the beam space; wherein the fastening device does not contact the soft pad.
US10145126B2
A tool for use during installation of a pre-hung door. The tool includes a base and at least one orientation indicator, such as a bubble level, mounted to the base. The tool also includes at least one spacer extending from the base. The at least one spacer may be positioned between an edge of a door panel and a respective adjacent portion of a door frame. The tool may also include at least one tongue extending from the base in a direction opposite the at least one spacer. The at least one tongue may be positioned between a weather strip and a face of the door frame so that the tool can remain in place when the door panel is open relative to the door frame.
US10145122B2
Covering comprising a structure formed by a plurality of panels provided on their lower face with at least one guide formed by a groove giving access to a cavity and longitudinal profiles perpendicular to said grooves on the panels, said profiles having, in turn, a guide and clips housed simultaneously in the cavities of both guides of the panel and the profile, the clips having a resilient body that is housed, in the expanded position, in the corresponding cavity, said body comprising at least two legs, each leg having, in turn, a shoulder area intended to make contact with the wall of the cavity immediately adjacent to the groove.
US10145120B1
A roofing material moving apparatus. This apparatus facilitates loading, unloading, and unrolling a roll of roofing material. Two load supports form a concave shape having a depressed region, a fulcrum end, and a junction end. A pair of legs extends from the fulcrum end of the load supports. A first pair of narrow rollers rotatably affix to a first crossbar. A second pair of narrow rollers rotatably affix to a second crossbar. Two pair of wide rollers rotatably affix to a pair of third crossbars extending between the depressed region of the load supports. The two wheels work together as a fulcrum for movement and pivoting of the apparatus.
US10145119B2
A tool for removing roof shingles is disclosed having a handle, a split shaft, a pair of roller wheels and a replaceable blade member. A pair of handles extends orthogonally from the proximal end of the shaft, while the distal end of the shaft separates into a first and second portion that support a flat, shingle-removing blade. Roller wheels are positioned adjacent to the blade such that the blade and wheels can be positioned along the roof surface to allow sliding of the blade under shingles and to provide a fulcrum point from which to lift the blade from beneath any secured roof shingles during removal. The shaft upper portion may include a slight upward bend to reduce back strain, while the user handles are preferably rotatably support to allow the tool to rotate as it is slide without the handles rotating relative to the user's hands and causing blisters.
US10145117B2
A skylight shade device and skylight mounted on a roof of a building includes a roof and a skylight installed on the roof. A shade element including photovoltaic cells is positioned to occlude at least a portion of high angle sunlight through the skylight dome without occluding low angle sunlight through the skylight dome.
US10145113B2
A stud weldable rebar includes a steel bar comprised of a material composition confirming to ASTM 706 which extends along an axis A from a first end to a second end. The steel bar includes a base portion disposed adjacent the first end which has a base diameter D1 to define a base cross-sectional area of the base portion. The steel bar also includes an upset portion disposed adjacent the second end which has an upset diameter D2 being greater than said base diameter D1 to define an upset cross-sectional area of said upset portion. The material composition of the steel bar is restricted to a carbon equivalency between 0.31 and 0.43, and the upset cross-sectional area is approximately 13.5% to 22.5% greater than the base cross-sectional area to provide A706 rebar that surprisingly meets both the AWS D1.1 and ACI 318 standards after stud welding.
US10145112B2
A glass beam element, for constructing a loadbearing structure, comprises at least one elongate structural reinforcement section extending along a longitudinal direction, and at least one glass segment bonded to said at least one elongate structural reinforcement section. The at least one elongate structural reinforcement section comprises a weldable material, and the at least one glass segment has a length along the longitudinal direction that is shorter than the elongate structural reinforcement section such as to allow welding of an end region of the at least one elongate structural reinforcement section without thereby damaging the at least one glass segment.
US10145104B1
Disclosed is a clip and method of mounting a furring channel to a load bearing member of a drywall grid system. The load bearing member includes an elongated web having an enlarged upper portion and a lower portion from which a pair of coplanar flanges projecting outward. The clip includes a bottom wall and an end wall from which two hanger hooks project upward. Each hanger hook includes a folded over portion configured to snap-fit and entrap a portion of the enlarged upper portion of the load bearing member, with the bottom wall being disposed on one of flanges of the load bearing member. A second clip is mounted on the load bearing member in a similar manner so that its bottom wall is disposed on the other of the flanges of the load bearing member, and with the hanger hooks of the two clips being interposed. A respective furring channel is mounted on each of the clip to be supported thereby.
US10145099B2
A flow control assembly comprising: a mounting bracket attachable to a wall of a collection chamber, the mounting bracket having an opening extending therethrough; a flow control module detachably coupled to the mounting bracket, the flow control module having an inlet and an outlet, the outlet being aligned with the opening of the mounting bracket; and a gasket having an opening extending therethrough, the opening being smaller than the outlet of the flow control module and the opening of the mounting bracket. The gasket is disposed between the flow control module and the mounting bracket so as to seal the flow control module against the mounting bracket, with the opening of the gasket aligned with the outlet of the flow control module and the opening of the mounting bracket so as to restrict flow out of the flow control module. Also described is a corresponding kit of parts and method of installation.
US10145098B2
A urinal assembly having a frame and a plurality of posts or posts extending from the frame. The frame can include a plurality of openings. The openings can be defined by a plurality of sides and corners. The posts can extend from the corners and/or from the sides of the openings. In some embodiments, posts extend from a first face and a second face of the frame.
US10145092B2
A backflow prevention device including a tank inside of and moveable relative to a housing. A cap coupled to the housing and including inlet and outlet chambers fluidly connected through an inlet, the outlet chamber communicating with the tank. A shell is connected to the cap and includes a shell inlet chamber, which communicates with a first outlet hole of the inlet chamber, and a second outlet hole, which communicates with the tank. An inlet sealing member opens/closes the inlet to fluidly connect/disconnect the inlet chamber and the outlet chamber; and an outlet hole sealing member is moveable with the tank to open/close the second outlet hole. Closing the second outlet hole prevents water from flowing through the second outlet hole and switches the inlet from open to closed. Opening the second outlet hole allows water to flow through the second outlet hole and switches the inlet to open.
US10145088B2
A control system comprising a position information generation unit configured to operate three modes to output position information: a first mode in which information about the position detected by a position detection apparatus is output as position information related to the position of a work machine, when the position determination is normal, a second mode in which information about a position obtained by using both of a particular point as a reference of the work machine obtained before a position determination becomes abnormal and operation information detected by a status detection apparatus is output as the position information, when the position determination is abnormal and the work machine is a static status, and a third mode in which the position information is not output, when the position determination is abnormal and the work machine is in a non-static status.
US10145087B2
To recognize an obstacle such as a working face which may be touched by a revolving upperstructure including a height position thereof at the time of a swing control. A plurality of first cameras 13 for forming bird's eye views which photograph obliquely lower parts of directions different from each other are arranged in a revolving upperstructure 3, a composite bird's eye view 20 is displayed on a display 15, second cameras 16R, 16L for photographing through images including corner parts from a rear end of the revolving upperstructure 3 to side parts within a visual field range are arranged in lower part positions of a swing frame 3a of the revolving upperstructure 3 so as to rotate following swing of the revolving upperstructure 3, and corner part through images 30R, 30L are displayed on the display 15 so as to be superimposed on the composite bird's eye view 20.
US10145085B2
A working machine including a ground engaging structure and a propulsion system for moving the working machine via the ground engaging structure. A body is supported on the ground engaging structure, and a working arm is connected to the body and has a carriage at one end for receiving an attachment. A control system is provided for selectively and variably oscillating the carriage.
US10145076B2
A system that includes a plurality of front faces configured to be arranged end-to-end in a series. Adjacent front faces are connected together by a different X-shaped or X-wye connector that facilitates installation of reinforcement tail walls. At least one tail wall is connected to each connector. A redundant reinforcing tail wall may be constructed and attached to one of the connectors to provide alternative load path(s).
US10145075B2
A multilayer marine wrapping is proposed wherein each layer has a removal strip and the removal strips are staggered, such that a single layer can be removed at a time.
US10145072B2
A barrier system and a method for dissipating energy in a body of fluid provides one or more barrier units each having an outer wall that defines a hollow inner chamber. Each barrier unit has a lower aperture and an upper aperture so fluid can flow in and out of the hollow inner chamber. Upward movement of fluid within the inner chamber is deflected inwardly and energy of the fluid is dissipated. The buoyancy of the barrier unit is controlled by a control system. Multiple barrier units can be used together to dissipate energy within a body of water over a large area. The barrier units can be easily assembled and deployed into a body of water. Where the barrier system is used in an ocean or another large body of water, the barrier units may be deployed from a ship, and may be anchored to the seafloor.
US10145071B2
A vehicle barrier system and method that prevents “tailgating”. The system may include a control system in communication with a sensor system for detecting a vehicle seeking passage through a gateway, as well as a first and second gate system. The control system receives data from the sensor system indicating the presence of the vehicle and, in response, determines whether the second gate system is closed. When the second gate is determined to be closed, the control system opens the first gate system to allow the vehicle to pass the first gate system and attempts to close the first gate system behind the vehicle after the vehicle passes the first gate system. In response to successfully closing the first gate system behind the vehicle, the second gate system is opened to allow the vehicle to proceed through the gateway. Otherwise, an alarm is sounded.
US10145064B2
An industrial textile formed from first and second systems of warp yarns interwoven with first, second, and third sets of weft yarns in a repeating pattern to provide a 2½ weft layer fabric construction is provided. One of each of the yarns of the first and second sets of weft yarns are arranged so as to form a vertically aligned pair with respect to one another, and the third set of weft yarns is located intermediate of the first and second sets of weft yarns between vertically aligned pairs from the first and second sets. Each of the warp yarns in the first system of warp yarns is interwoven only with the weft of the first and third sets, and each of the warp yarns of the second system of warp yarns is interwoven only with the weft yarns of the second and third sets. The warp yarns of the first and second systems of warp yarns are arranged as vertically stacked pairs.
US10145057B2
A non-marring nozzle attachment that may be used with a vacuum device to clean delicate surfaces such as lint screens. The non-marring nozzle attachment may use a non-marring material with a beveled surface to allow for a vacuum to safely and effectively clean delicate surfaces. The non-marring nozzle attachment may further include spaced slits to allow for more intimate contact between the nozzle tip and a surface to be cleaned. The vacuum device may be mounted near the desired area of use to a variety of rigid surfaces without having to penetrate the rigid surface with nails or screws.
US10145051B2
A laundry treatment apparatus includes a tub body configured to store water, a tub cover configured to define an upper surface of the tub body, an introduction aperture defined through the tub cover, a supply aperture provided in the tub cover, and configured to enable supply of water into the tub body, a drum that is rotatably provided in the tub body, and that is configured to receive laundry, the drum including an opening in communication with the introduction aperture, a door configured to open and close the introduction aperture, and an ejection unit configured to eject water introduced into the supply aperture to at least one of the door or to the drum.
US10145048B2
A clutch device may include; a first rotor body; a second rotor body engageable with the first rotor body; a clutch drive motor connected with a first drive line and a second drive line; a clutch mechanism; a first switch comprising first and second contact point electrodes; a second switch comprising first and second contact point electrodes; a first terminal electrically connected with of the first contact point electrode of the first switch; a second terminal electrically connected with the first drive line; a third terminal electrically connected with the first contact point electrode of the second switch; and a fourth terminal electrically connecting with the second drive line. The second contact point electrode of the first switch and the second contact point electrode of the second switch may be electrically connected with the second drive line.
US10145047B2
The present disclosure relates to: a washing machine capable of washing laundry automatically by a washing method suitable for the laundry; and a control method therefore. A control device for a washing machine according to embodiments of the present invention may comprise: a fabric detection unit for detecting the fabric texture of laundry received in a drum of a washing machine; a detection unit for detecting the weight of the laundry; and a control unit for determining the fabric type of the laundry on the basis of the detected fabric texture, and controlling the washing machine on the basis of the fabric type and the weight of the laundry.
US10145044B2
Described are bags having a sack-like body formed of knitwear. The knitwear includes a first layer and a second layer, wherein the first layer at least partly overlaps the second layer, and wherein the first layer and the second layer are knitted integrally in a one-piece knitting process.
US10145041B2
A method for knitting a shoe upper capable of forming a new stretch preventing section different from a conventional stretch preventing section, and a shoe upper obtained through such knitting method are provided. The shoe upper including a base knitted fabric portion (1F) that covers a foot of a wearer is knitted. In the knitting, a stretch preventing section (20) configured by a knitted fabric of a plain structure is knitted, where one end in a wale direction is connected to the base knitted fabric portion (1F) and another end in the wale direction is not connected to the base knitted fabric portion (1F). The stretch preventing section (20) in which one end is fixed and the other end is not fixed is curled to a tubular shape. The curled stretch preventing section (20) is thicker than the other portions, thus suppressing the stretch of the shoe upper.
US10145038B2
A woven fabric which enables protection of optical fiber yarns while the woven fabric is processed into a design woven fabric and easy exposure of the optical fiber yarns when the protection thereof becomes unnecessary, a method for manufacturing a design woven fabric from this woven fabric, and a method for manufacturing an interior material including: A woven fabric having a first constituent yarn having an optical fiber yarn and a non-light guiding yarn and a second constituent yarn having a non-light guiding yarn. The woven fabric having a first region in which the first and second constituent yarns are woven in one layer and a second region which is positioned adjacent to the first region and in which the first and second constituent yarns and are woven in two or more separable layers. The woven fabric has an optical fiber layer and a back protecting layer as the separable layers. The optical fiber layer is a layer formed of the optical fiber yarns. The back protecting layer is a layer in which the non-light guiding yarn of the first constituent yarn and the non-light guiding yarn of the second constituent yarn are woven. Further, the woven fabric can further have a front protecting layer.
US10145037B2
A multi-carrier, zonal weaving system and method of manufacturing a zonal woven material is provided. The multi-carrier system includes a first weft yarn, a second weft yarn, and one or more intermediate warp yarns for wrapping by the first and second weft yarns. The zonal weaving method includes receiving a first weft yarn from a first origin via a first shed, wrapping it around one or more zonal warp yarns, and returned to the first weft origin after the first shed upper and lower yarns are exchanged. In further aspects, a second weft yarn is received from a second weft origin via a second shed, wrapped around the same intermediate, zonal warp yarns, and returned to the second weft origin after exchange of the second shed yarns. In one aspect, the first and second weft yarns are interlocked during wrapping of the common warp yarns.
US10145035B2
Fabrics which allow for light transmission and provide thermal insulation are described. A fabric is formed from at least one yarn to form a continuous web of fabric. The continuous web is configured to allow between 20% and 65% of incident light to be transmitted through the fabric, and to reduce heat transfer through the fabric such that the fabric has an R value of at least 0.75 K·m2/W. The continuous web of fabric may be a woven fabric where the at least one yarn is woven to form the woven fabric.
US10145033B2
A cleaning head of a cleaning device for cleaning a spinning rotor, by means of a feed device, be fed into a predetermined cleaning position in the interior of the spinning rotor. The cleaning head has a cleaning element formed as a scraper element arranged in such a manner that, in the predetermined cleaning position of the cleaning head, it is fed to the open edge of the spinning rotor. A cleaning device for cleaning a spinning rotor features a corresponding cleaning head. With a method for cleaning a spinning rotor by means of the cleaning device, after feed of the cleaning head into the cleaning position, the open edge of the spinning rotor is cleaned by means of the scraper element.
US10145024B2
The present disclosure relates to an apparatus for growing an ingot from silicon melt contained in a crucible by using a seed crystal, the apparatus comprising a chamber including a lower portion for accommodating the crucible and an upper portion through which the growing ingot passes, and a cooling rate control unit which is disposed at the upper portion of the chamber to extend to the lower portion of the chamber and has a hole through which the growing ingot passes, wherein the cooling rate control unit comprises an insulation part for insulating the ingot, a cooling part disposed over the insulation part to cool the ingot, and a blocking part disposed between the insulation part and the cooling part to prevent heat exchange therebetween.
US10145023B2
Production of silicon ingots in a crystal puller that involve reduction in the formation of silicon deposits on the puller exhaust system are disclosed.
US10145019B2
Methods, equipment, and reagents for preparing organic compounds using custom electrolytes based on different ionic liquids in electrolytic decarboxylation reactions are disclosed.
US10145014B2
Provided is a film forming apparatus including a placement stage; a processing container that defines a processing chamber which accommodates the placement stage and includes a first region and a second region; a gas supply section that supplies a precursor gas to the first region; and a plasma generation section that generates plasma of a reactive gas in the second region. The plasma generation section includes: at least one waveguide that defines a wave guiding path above the placement stage and above the second region, a microwave generator connected to the at least one waveguide, and a plurality of protrusions made of a dielectric material. The protrusions pass through a plurality of openings formed in a lower conductive part of the at least one waveguide to extend into the second region. The protrusions are arranged in a radial direction with respect an axis of the placement stage.
US10145010B2
Apparatuses for multi-station semiconductor deposition operations with RF power frequency tuning are disclosed. The RF power frequency may be tuned according to a measured impedance of a plasma during the semiconductor deposition operation. In certain implementations of the apparatuses, a RF power parameter may be adjusted during or prior to the deposition operation. Certain other implementations of the semiconductor deposition operations may include multiple different deposition processes with corresponding different recipes. The recipes may include different RF power parameters for each respective recipe. The respective recipes may adjust the RF power parameter prior to each deposition process. RF power frequency tuning may be utilized during each deposition process.
US10145009B2
Vapor deposition processes for forming thin films comprising gold on a substrate in a reaction space are provided. The processes can be cyclical vapor deposition processes, such as atomic layer deposition (ALD) processes. The processes can include contacting the substrate with a gold precursor comprising at least one sulfur donor ligand and at least one alkyl ligand, and contacting the substrate with a second reactant comprising ozone. The deposited thin films comprising gold can be uniform, continuous, and conductive at very low thicknesses.
US10145007B2
[Problem] To produce a DLC film excellent in hardness and adhesiveness while preventing a film-forming rate from slowing even when the gas pressure in a chamber is a low pressure without requiring a large-scale facility such as a thermostatic device.[solution] There is provided a DLC film film-forming method being a film-forming method to film-form a DLC film on a substrate by a plasma CVD method, the method including: setting a voltage to be applied to a substrate using a DC pulse power supply to a bias voltage; using an acetylene gas or a methane gas as a film-forming gas to be supplied into a chamber; setting the total pressure of the gas in the chamber to not less than 0.5 Pa and not more than 3 Pa when the methane gas is used; setting the total pressure of the gas in the chamber to not less than 0.3 Pa and not more than 3 Pa when the acetylene gas is used; and setting the bias voltage to not less than 0.9 kV and not more than 2.2 kV.
US10145002B2
A method and device for laser-induced marking. The method comprises providing an article having a marking surface including a non-flat area, providing a first laser transfer foil, providing a first laser unit for emitting first laser light, providing a first hard adaptor that is essentially transparent to the first laser light, the first hard adaptor having a contacting surface that essentially is a negative of at least a part of the marking surface of the article, contacting the first laser transfer foil with the marking surface of the article by the first hard adaptor such that the first laser transfer foil is arranged between the marking surface of the article and the contacting surface of the first hard adaptor, and irradiating the first laser light through the first hard adaptor onto the first laser transfer foil. The device comprises a first laser unit for emitting and scanning first laser light over a first transfer area, a first foil unit for providing a first laser transfer foil at the first transfer area, a carrier for providing an article at the first transfer area, the article having a marking surface comprising a non-flat surface area, a first hard adaptor that is transparent for the first laser light, the first hard adapter having a first contacting surface that is essentially a negative of the non-flat surface area of the marking surface, and a contacting unit for bringing the first laser transfer foil in contact with the marking surface by causing the first contacting surface to move one of the first laser transfer foil and the marking surface towards one another.
US10144991B2
Methods of producing high purity powders of submicron particles of metal oxides are presented. The methods comprise providing or forming an alloy of a first metal with a second metal, optionally heating the alloy, subjecting the alloy to a leaching agent to remove the second metal from the alloy and to oxidize the first metal, thus forming submicron oxide particles of the first metal. Collections of high purity, high surface area, submicron particles are presented as well.
US10144989B2
A method is disclosed for recovering gold from a gold-containing organic solution containing soluble gold. The method comprises contacting the gold-containing organic solution with an aqueous stripping solution in order to extract gold from the gold-containing organic solution into the aqueous stripping solution. The aqueous stripping solution containing gold is separated from the organic solution. The separated aqueous stripping solution containing gold is contacted with a reducing agent containing sodium metabisulphite, in order to reduce gold from the aqueous stripping solution.
US10144986B2
The present invention relates to an ultrahigh-strength steel sheet and a manufacturing method therefor. More specifically, the present invention can provide an ultra-high strength steel sheet which can ensure weldability and a delayed fracture resistance property by controlling the contents of elements affecting platability along with the contents of austenite-stabilizing elements and increasing twin formation through re-rolling, and simultaneously improve impact characteristics and workability by ensuring excellent yield strength and ductility.
US10144983B2
A method of reheating a rail weld zone after rails were welded, a distance C between a reheating region P of a rail web portion 2 and a welding center Q is set to more than or equal to 0.2 times and less than or equal to three times a HAZ length Lh of the rail weld zone. A length B of the reheating region P may be more than or equal to 0.5 times and less than or equal to five times the HAZ length Lh of the rail weld zone. A height A of the reheating region P may be more than or equal to 0.2 times a height Hw of the rail web portion 2. A temperature Th reached in a reheating process at a center of the reheating region P may be higher than or equal to 400° C. and lower than or equal to 750° C.
US10144982B2
Provided is a Fe—Mn—C-based twinning-induced plasticity (TWIP) steel which includes 13 wt % to 24 wt % of manganese (Mn), 0.4 wt % to 1.2 wt % of carbon (C), and iron (Fe) as well as other unavoidable impurities as a remainder, is manufactured by caliber rolling, has a microstructure including elongated grains that are elongated in a rolling direction, and has an average grain size of the elongated grains in a direction perpendicular to the rolling direction of 1 μm or less.
US10144981B2
A process for manufacturing reduced iron agglomerates which comprises introducing starting agglomerates that comprise both an iron oxide-containing material and a carbonaceous reducing agent onto the hearth of a moving-bed heating furnace, and heating the agglomerates to reduce the iron oxide contained in the agglomerates, wherein the iron oxide-containing material contained in the starting agglomerates has a mean particle diameter of 4 to 23 μm and contains at least 18% of particles having diameters of 10 μm or less. By the use of such starting agglomerates, the process attains: an improvement in the yield of reduced iron agglomerates having large particle diameters; a reduction in the manufacturing time, said reduction leading to an enhancement in the productivity; and a remarkable reduction in the content of impurities such as sulfur in the reduced-iron agglomerates.
US10144979B2
The present invention relates to a nucleic acid molecule comprising a 5′ portion of an intestinal lactase-phlorizine hydrolase (LPH) gene contributing to or indicative of the adult-type hypolactasia. The present invention further relates to methods for testing for the presence of or predisposition to adult-type hypolactasia that are based on the analysis of an SNP contained in the above recited nucleic acid molecule. Additionally, the present invention relates to diagnostic composition and kit useful in the detection of the presence of or predisposition to adult-type hypolactasia.
US10144975B2
The present invention relates to the use of the measure of anelloviral load for the determination of immunosuppression. More precisely, the present invention provides a method for characterizing the immunosuppressed or non-immunosuppressed status of a subject, comprising the steps of determining the anelloviral load from a biological sample of the said subject, and determining from the said comparison the immunosuppressed or non-immunosuppressed status. The determination of the immunosuppressed status of the subject can then be used to design or adapt a therapeutic treatment.
US10144973B2
The present invention provides a method for determining whether or not an aqueous solution contains two or more cancer cells. The present method is characterized by the following three matters. First, the PCR solution contains the TS primer at a concentration of not less than 0.1 μM and not more than 1 μM in the present invention. Second, the PCR solution contains an ACX reverse primer. Third, the PCR solution contains the ACX reverse primer at a concentration of not less than 0.02 μM and not more than 0.06 μM in the present invention. In the present method, it is determined that an aqueous solution contains cancer cells even if the aqueous solution contains only two cancer cells.
US10144968B2
A polymer substrate, such as a polymer coating or a polymer hydrogel network, includes carboxyl moieties that can be used as conjugation sites to which receptor or analyte molecules can be attached. In an example, the polymer substrate includes a polyacrylamide polymer network having alkanoic acid moieties or derivatives thereof, which can react with carboxyl activating compounds to provide an activated alkanoate moieties on the polyacrylamide network. Amine-terminated nucleic acids can react with the activated alkanoate moieties to capture the nucleic acid to the polymer network through an alkylamide moiety.
US10144952B2
The present invention provides methods, compositions and devices for stabilizing the extracellular nucleic acid population in a cell-containing biological sample using butanamide.
US10144948B2
The aim of the present invention is a method of sampling all or part of a sample (11) of biological matter (7), which is crude, enriched or cultured through contact with a culture medium (8), such as agar, for example in a Petri dish, using a probe (3) equipped with a terminal end (4), said sampling method comprising the steps of cooling the terminal end (4) of the probe (3), sticking all or part of the sample (11) of biological matter (7) to be sampled through contact, or by applying a pressure exerted by the terminal end (4) onto the sample (11) of biological matter (7), and sampling of all or part of the sample (11) of biological matter (7) so as to separate the sample (11) of biological matter (7) from the culture medium (8), a method of depositing into a container (9) or onto an analysis plate (14) all or part of a sample (11) of biological matter (7) stuck onto a frosted terminal end (4) of a probe, said depositing method including a step of separating the terminal end (4) of the probe (3) from all or part of the sample (11) of biological matter (7), as well as a device (2), a kit and an apparatus (1) implementing these methods.
US10144944B2
Polypeptide preparations having target levels of glycans, and methods of producing such polypeptide preparations using putrescine, are described.
US10144940B2
The invention concerns a method for producing, on an industrial scale, capsular polysaccharide of Haemophilus influenzae type b (PRP) intended for vaccine purposes, according to which a strain of Haemophilus influenzae type b (Hib) is cultured in a culture medium, the culture supernatant is harvested and treated in order to extract the capsular polysaccharide therefrom, said culture medium comprising at least: —one source of carbon, —protoporphyrin, —salts, —amino acids, —NAD or NADH, —vitamins, —means for regulating the pH, characterized in that said culture medium is chemically defined.
US10144936B2
A method of assembling multi-fragment DNA molecule, the method including: 1) constructing a vector system including an acceptor vector A1, a first donor vector B1, and a second donor vector B2, and each of the acceptor vector A1, the second donor vector B2, and the second donor vector B2 including a multiple cloning site; 2) introducing a first target sequence Lm to the first donor vector B1, m being an odd number starting from 1, and introducing a second target sequence Ln to the second donor vector B2, n being an even number starting from 2; and 3) repeating 2) to assemble multiple fragments to yield a multi-fragment DNA molecule.
US10144929B2
This document provides polypeptide inhibitors of Smad3 polypeptide activities. For example, methods and materials for using polypeptides (e.g., polypeptides designed to include both a cell penetrating amino acid sequence and an amino acid segment of a SH3 domain of a SNX9 polypeptide) to inhibit one or more Smad3 polypeptide activities are provided. This document also provides methods and materials for using RNA interference to treat a disease (e.g., a fibrotic disease) in a mammal (e.g., a human).
US10144927B2
The present invention provides methods for conducting screens using nucleic acid elements (e.g., interfering RNAs) to confidently identify hit genetic elements. The present invention further comprises constructing vectors that contain two or more nucleic acid elements to knock down all pairwise combinations of the hit genetic elements identified from the screen. Following quantitation of the single and double-knockdown phenotypes, genetic interactions between all gene pairs can be calculated. Genes can then be clustered according to the similarity of the pattern of their interactions with all of the other genes to obtain a genetic interaction map, which can advantageously be used to predict functional associations between genes and identify drug targets for therapy such as combination cancer therapy.
US10144926B2
Methods and compositions are provided for rapidly identifying novel structure-switching aptamers.
US10144918B2
Disclosed are mutant DNA polymerases having increased 3′-mismatch discrimination relative to a corresponding, unmodified polymerase. The mutant polymerases are useful in a variety of disclosed primer extension methods. Also disclosed are related compositions, including recombinant nucleic acids, vectors, and host cells, which are useful, e.g., for production of the mutant DNA polymerases.
US10144917B2
The present invention relates to a method for preparing a vaccine antigen, which includes a step of fragmenting a biological membrane associated with said vaccine antigen by treating said biological membrane with at least one calixarene of formula (II): wherein: X is a —(CH2)-CO2Y group and Y is an alkaline metal or one of the pharmaceutically acceptable salts thereof, wherein said resulting vaccine antigen also includes a fragment of the biological membrane associated with said antigen. The present invention also relates to a vaccine that can be produced by implementing the method, including a calixarene of formula (II) in carrier format, with a quantity of 0.1 to 1,000 μg in the total weight of the vaccine. The present invention further relates to the use of a calixarene as defined above for the preparation of a vaccine or a vaccine antigen, and to the vaccine for use as a drug in the treatment or prevention of an infectious disease.
US10144914B2
In the present specification and claims, three modified cell culture substrates are disclosed for protecting peptide mimetic surfaces used in cell culture technology. The methods are able to retain the functionality of the bioactive species conjugated to the surface. In particular, a vitronectin peptide fragment Ac-Lys-Gly-Gly-Pro-Gln-Val-Thr-Arg-Gly-Asp-Val-Phe-Thr-Met-Pro-NH2 was able to facilitate growth and proliferation of undifferentiated human embryonic stem cells after stabilization using 3 different modified cell culture substrates for of protection against gamma irradiation. The modified substrates disclosed in this invention are (i) covalent attachment of the antioxidant molecules (via blocking step); (ii) The use of coatings consisting of anti-oxidants and stabilizers comprising glycoprotiens, sugars, carbohydrates, poly(amino acids), peptides and hydrophilic polymers; and (iii) a third method wherein the same methionine contained in the bioactive sequence used to facilitate growth and proliferation of human embryonic stem cells was also used as a sacrificial coating to protect the same conjugated sequence against damage by gamma irradiation.
US10144913B1
A method or process to increase the production of products of interest in plant material including plant cultures, such as, for example, cell suspension cultures, root cultures, and hairy root cultures is provided. In one embodiment, the method is to contacting the plant material with a precursor or xenobiotic when producing a product of interest from a plant. In another embodiment the plant material is also contacted with a trapping agent. The process may also provide for contacting an elicitor of the product of interest with the plant material. An embodiment provides for contacting an elicitor, precursor and trapping agent with the plant material. The ability to produce novel compounds such as glucosides and glucuronides is provided.
US10144909B2
Described are fabric care pellets comprising an amphiphilic polymer, preferably an ethylene acrylic acid copolymer, a surfactant, and a filler, wherein the pellet contains 30 wt % to 90 wt % amphiphilic polymer, preferably ethylene acrylic acid copolymer, and methods of making and using the same.
US10144905B2
A delayed antifoam composition used in laundry detergent comprising an amino silicone antifoam fluid that selectively use alkyl groups selectively being R and R2 where R is a monovalent C1- to C6-alkyl radical, and R2 is a monovalent C2- to C6-alkyl radical, when in selective combination with a water soluble filler material sufficiently and effectively depresses foam at the rinsing stage without even affecting the foam depression in the washing stage. The process of making delayed antifoam detergent composition. The composition is used in diverse applications such as personal care, hair care, textile, and release and alike.
US10144895B2
A lubrication structure for a shock absorber of a vehicle has a protecting pipe and a self-lubricating layer. The protecting pipe is a non-circular metal tube and has an elongated slit. The self-lubricating layer is an engineering plastic layer, is deposited in the protecting pipe and has a shaft hole. When the lubrication structure is deposited between an outer tube and an inner tube of a shock absorber of a vehicle, the protecting pipe engages in the outer tube to prevent the self-lubricating layer from contacting the outer tube directly. The self-lubricating layer with a small friction coefficient is mounted around the inner shaft to enable the inner shaft to move smoothly relative to the outer tube. The lubrication structure has characteristics of low cost, small volume, and small tolerance, and the life and the practicality of the lubrication structure can be improved.
US10144894B2
An oil composition comprising a first component having pendant groups and a second component but free of a third component and process for making such oil composition, where a single molecule of the third component can form large shearable stable complex structure with two molecules of the first component via van der Waals force between pendant groups and the terminal carbon chains, and a single molecule of the second component is capable of adjoining no more than one molecule of the first type. The oil composition has high shear stability making it suitable for use in lubricants subject to repeated high shear stress events.
US10144893B2
The present invention relates to a low-friction member imitating shark skin and a manufacturing method therefor, the low-friction member implementing a structure similar to shark skin and having riblets by stacking, in layers, composite particles formed by attaching spherical particles on the surfaces of plate-shaped particles, and thus the low-friction member has excellent low-friction characteristics. The present invention comprises: a base plate; plate-shaped particles stacked in layers on the surface of the base plate in the form of scales; and a plurality of spherical metal lubricating particles having a size smaller than that of the plate-shaped particles, and coated on the surfaces of the plate-shaped particles, wherein the metal lubricating particles are arranged in the form of a bridge connecting the base plate and the plate-shaped particles, and the plate-shaped particles to each other.
US10144887B2
A method of gasifying carbonaceous material is described. The method comprises a first step of pyrolyzing and partially gasifying the carbonaceous material to produce volatiles and char. The volatiles and the char are then separated and, subsequently, the char is gasified and the volatiles are reformed. The raw product gas is then finally cleaned with char or char-supported catalysts or other catalysts.
US10144881B2
A process for converting triacylglycerides-containing oils into crude oil precursors and/or distillate hydrocarbon fuels is disclosed. The process may include: reacting a triacylglycerides-containing oil-water-hydrogen mixture at a temperature in the range from about 250° C. to about 525° C. and a pressure greater than about 75 bar to convert at least a portion of the triacylglycerides and recovering a reaction effluent comprising water and one or more of isoolefins, isoparaffins, cycloolefins, cycloparaffins, and aromatics; hydrotreating the reaction effluent to form a hydrotreated effluent.
US10144880B2
A process for converting triacylglycerides-containing oils into crude oil precursors and/or distillate hydrocarbon fuels is disclosed. The process may include: reacting a triacylglycerides-containing oil-water-diatomic hydrogen mixture at a temperature in the range from about 250° C. to about 560° C. and a pressure greater than about 75 bar to convert at least a portion of the triacylglycerides and recovering a reaction effluent comprising water and one or more of isoolefins, isoparaffins, cycloolefins, cycloparaffins, and aromatics; and hydrotreating the reaction effluent to form a hydrotreated effluent.
US10144874B2
The thermochemical conversion of biomass material to one or more reaction products includes generating thermal energy with at least one heat source, providing a volume of feedstock, providing a volume of supercritical fluid, transferring a portion of the generated thermal energy to the volume of supercritical fluid, transferring at least a portion of the generated thermal energy from the volume of supercritical fluid to the volume of feedstock, and performing a thermal decomposition process on the volume of feedstock with the thermal energy transferred from the volume of supercritical fluid to the volume of the feedstock in order to form at least one reaction product.
US10144872B2
There is provided herein a flame retardant additive composition comprising (a) a cyclic phosphonate mixture of (i) (5-ethyl-2-methyl-2-oxido-1,3,2-dioxaphosphorinan-5-yl)methyl methyl ester of P-alkylphosphonic acid and (ii) bis[(5-ethyl-2-2-methyl-2-oxido-1,3,2-dioxaphosphorinan-5-yl)methyl]ester of P-alkyl phosphonic acid; and, (b) an aryl bisphosphate ester of the general formula (I) herein. There is also provided herein a polyurethane foam containing the flame retardant additive composition as well as articles made comprising said polyurethane foam.
US10144862B2
A well treatment composition is well-designed for the simultaneous enhancement of the production of both liquid and gaseous hydrocarbons from the same reservoir on a non-selective basis. The well treatment composition includes a first surfactant and a second surfactant, wherein the second surfactant is selected from the group consisting of ethoxylated alkylene amines, ethoxylated alkyl amines, propoxylated alkylene amines, propoxylated alkyl amines, ethoxylated-propoxylated alkylene amines and ethoxylated-propoxylated alkyl amines. The well treatment composition also includes a first solvent, a second solvent and water. Methods for using the well treatment composition include the steps of emplacing the well treatment composition into wells having high and low gas-to-oil ratios.
US10144838B2
The invention relates to an inkjet ink comprising: one or more monofunctional (meth)acrylate monomers, including 2-methyl-2-ethyl-1,3-dioxolane-4-yl)methyl acrylate (MEDA); a pigment; and a photoinitiator.
US10144836B2
Disclosed is a carbon nanotube dispersion liquid composition for forming a conductive layer in a display device. The carbon nanotube dispersion liquid composition includes, for example, 0.05 to 20 wt % of carbon nanotubes, 0.02 to 40 wt % of a polyacrylic acid resin, and 50 to 99.93 wt % of C2-C5 straight-chain alkanol, based on the total weight of the carbon nanotube dispersion liquid composition.
US10144822B2
The present invention relates to transparent chips for artificial marble and artificial marble including the same. The transparent chips for artificial marble include (A) a halogenated epoxy acrylate resin and (B) metal fibers. The transparent chips are fabricated by adding metal fibers to a transparent resin. The transparent chips for artificial marble can implement both linear stripe patterns and three-dimensional effects inherent thereto, thereby providing an aesthetically pleasing appearance.
US10144820B2
A cross-linked rubber exhibits high strength and excellent abrasion resistance as compared with a known cross-linked rubber. The cross-linked rubber is obtained by cross-linking a rubber composition that includes a hydrogenated conjugated diene-based polymer, an olefin-based rubber, and a cross-linking agent, the hydrogenated conjugated diene-based polymer being a hydrogenated product of a polymer that includes a structural unit derived from butadiene, and including at least one of an amino group and a hydrocarbyloxysilyl group at one terminal or each terminal.
US10144819B2
This invention relates to a rubber composition comprised of at least one diene-based elastomer and rubber reinforcement comprised of fibrillated aramid fiber micropulp and reinforcing filler comprised of pre-hydrophobated precipitated silica. Such fibrillated aramid micropulp is comprised of micronized fibrillated aramid fiber pulp. Such pre-hydrophobated precipitated silica is comprised of precipitated silica pre-treated with at least one of bis(3-trialkylsilylalkyl) polysulfide, alkoxyorganomercaptosilane, optionally together with an alkylsilane. The invention further relates to such rubber composition wherein said reinforcing filler is comprised of a combination of said pre-hydrophobated precipitated silica as a precipitated silica pre-treated with an alkoxyorganomercaptosilane and a precipitated silica wherein said pre-hydrophobated precipitated silica and said precipitated silica are both hydrophobated in situ within the rubber composition with a bis(3-trialkoxysilylalkyl) polysulfide. The invention further relates to tires containing at least one component comprised of such rubber composition such as for example a tire tread.
US10144813B2
This invention relates to a family of aliphatic esters having the following general structure: R1—O—C(O)—R4—C(O)-[—O—R2—O—C(O)—R5—C(O)-]m—O—R3 in which: R1 is selected from one or more of the groups consisting of H, linear and branched saturated and unsaturated alkyl residues of the C1-C24 type, and polyol residues esterified with C1-C24 monocarboxylic acids; R2 comprises —CH2—C(CH3)2—CH2— and C2-C8 alkylene groups, and comprises at least 50% in moles of the said —CH2—C(CH3)2—CH2— groups; R3 is selected from one or more of the groups consisting of H, linear and branched saturated and unsaturated alkyl residues of the C1-C24 type, and polyol residues esterified with C1-C24 monocarboxylic acids; R4 and R5 comprise one or more C2-C22 alkylenes and comprise at least 50% in moles of C7 alkylenes; m lies between 1 and 20; at least one of R1 and/or R3 comprise polyol residues esterified with at least one C1-C24 monocarboxylic acid selected from the group consisting of stearic acid, palmitic acid, 9-ketostearic acid, 10-ketostearic acid and mixtures thereof. These esters are particularly suitable for use as plasticizers for various types of polymers such as for example vinyl polymers of the polyvinyl chloride (PVC) type, thermoplastic elastomers, and hydroxy acid polyesters, for example polyesters of lactic acid.
US10144808B2
One of the purposes of the present invention is to provide a polysiloxane macromonomer which has high hydrophilicity and a narrow molecular weight distribution and is usable as a material for ophthalmic lenses. The present invention provides a method for preparing a both-terminal modified polysiloxane macromonomer represented by the following average structural formula [I]: RMe2SiO(Me2SiO)pSiMe2R [I] wherein R represents —C3H6O(C2H4O)qC(═O)NH(C2H4O)sC(═O)C(Q)=CH2, Me is a methyl group, p is an integer of from 40 to 100, q is an integer of from 5 to 10, s is an integer of from 1 to 3 and Q is a methyl group or a hydrogen atom, wherein the method comprises steps of (a) reacting a polysiloxane which has polyoxyethylenes at both terminals and is represented by the following average structural formula [II]: R″Me2SiO(Me2SiO)pSiMe2R″ [II] wherein R″ represents —C3H6O(C2H4O)qH and Me, p and q are as defined above, with a compound represented by the following general formula [III]: OCN(C2H4O)sC(═O)C(Q)=CH2 [III] wherein Q and s are as defined above, in the presence of a catalyst, (b) subjecting the mixture obtained in step (a) to liquid-liquid extraction by hexane and acetonitrile, and (c) removing hexane from a hexane phase to obtain the both-terminal modified polysiloxane macromonomer represented by the average structural formula [I]. Further, the present invention provides a both-terminal modified polysiloxane macromonomer prepared according to the aforesaid method.
US10144801B2
The polyester resin according to the present invention is a polyester resin containing a diol unit and a dicarboxylic acid unit, wherein 50 to 95% by mol of the diol unit is a unit derived from pentacyclopentadecane dimethanol represented by a predetermined formula (I) and/or a unit derived from pentacyclopentadecane dimethanol represented by a predetermined formula (II), 50 to 100% by mol of the dicarboxylic acid unit is a unit derived from an aromatic dicarboxylic acid, and both of predetermined conditions (1) and (2) are satisfied.
US10144795B2
The invention relates to a non-aqueous coating composition comprising a. a polyisocyanate, b. a polyol having an average functionality of more than 3 hydroxyl groups per molecule, c. a metal based curing catalyst for the addition reaction of isocyanate groups and hydroxyl groups, and d. a mercapto carboxylic acid, wherein the coating composition does not contain a carboxylic acid wherein the carbonyl group of the carboxylic acid is in conjugation with a π-electron system.
US10144787B2
A technology for curing a photocurable resin composition by ultraviolet ray/infrared ray hybrid irradiation is provided. An infrared ray irradiation is applied at least one of before or after the application of ultraviolet ray irradiation to a photocurable resin composition, to have the photocurable resin composition cured. It becomes possible to relax the ultraviolet ray irradiation conditions for photo curing by applying an infrared ray irradiation as compared with the case in which the infrared ray irradiation is not applied, and, in particular, the scratch resistance characteristics of a cured film are significantly enhanced. Moreover, because of a combination of ultraviolet ray irradiation and infrared ray irradiation, the curing time period of a cured film can be reduced and/or stress relaxation effects can be produced. Besides, it becomes possible to control the reflectance of a cured film by varying an irradiation amount of infrared ray.
US10144785B2
Described are processes that include the non-enzymatic, hydrolytic liquefaction of lignocellulosic biomass to form digest slurries and heat recovery from such digest slurries. Due to enhanced flow properties of the digest slurries such heat recovery can be efficiently conducted in spiral, plate and frame or other heat exchanger designs, with the recovered heat going to unit operations of the process such as heating incoming pretreatment media for the liquefaction. Processes can also involve additional hydrolytic digestion of some or all of the initial slurry components with enzyme and/or additional heat recovery from the initial slurry by direct contact heat exchange in which a portion of the digest slurry liquids is flashed to vapor and that vapor is condensed onto incoming lignocellulosic biomass to the process. Processes as described can be integrated into ethanol manufacture by fermentation of sugars from the digested compositions.
US10144778B2
A pharmaceutical composition comprising an active agent that causes reduction of the level of systemic immunosuppression in an individual for use in treating a disease, disorder, condition or injury of the CNS that does not include the autoimmune neuroinflammatory disease, relapsing-remitting multiple sclerosis (RRMS), is provided. The pharmaceutical composition is for administration by a dosage regimen comprising at least two courses of therapy, each course of therapy comprising in sequence a treatment session followed by an interval session.
US10144764B2
The present invention is directed to a novel class of antimicrobial agents called γ-AApeptides. The current invention provides various categories of γ-AApeptides, for example, linear γ-AApeptides, cyclic γ-AApeptides, and lipidated γ-AApeptides. γ-AApeptides of the current invention are designed to exert antimicrobial activity while being stable and non-toxic. γ-AApeptides also do not appear to lead to the development of microbial resistance in treated microorganisms. Thus, the disclosed γ-AApeptides can be used for the treatment of various medical conditions associated with pathogenic microorganisms.
US10144762B2
A method for enhancing, by at least 10 fold, the antibacterial activity of an antisense oligonucleotide composed of morpholino subunits linked by phosphorus-containing intersubunit linkages. The method includes one or both of: conjugating an arginine-rich carrier to a 3′ or 5′ end of the oligonucleotide and modifying the oligonucleotide to contain 20%-50% intersubunit linkages that are positively charged at physiological pH. Also disclosed is an antisense oligonucleotide having enhanced antibacterial activity by virtue of one or both modifications.
US10144743B2
The present invention provides a compound useful as an agent for the prophylaxis or treatment of neurodegenerative disease and the like, or a salt thereof.The present invention relates to a compound represented by the formula wherein each symbol is as defined in the specification, or a salt thereof.
US10144740B2
The presently described technology provides compositions comprising aryl carboxylic acids and, for example NSAIDs, chemically conjugated to oxycodone (4,5-α-epoxy-14-hydroxy-17-methylmorphinan-6-one) to form novel prodrugs/compositions of oxycodone, including benzoates, salicylates, propionates, fenamates, and acetates, which have a decreased potential for abuse of oxycodone. The present technology also provides methods of treating patients, pharmaceutical kits and methods of synthesizing conjugates of the present technology.
US10144736B2
The invention provides 4,6-di- and 2,4,6-tri-substituted pteridine derivatives with a specific substitution pattern which exhibit a significant and selective activity against certain types of viral infections, in particular selectively inhibit replication of Flaviridae such as the hepatitis C virus, and are useful for the prevention and treatment of such viral infections.
US10144734B2
Provided herein are compounds of the Formula I: or pharmaceutically acceptable salt or solvate thereof, wherein A, B, X1, X2, X3, X4, Ring D, E, Ra, Rb, n and m have the meanings given in the specification, which are inhibitors of RET kinase and are useful in the treatment and prevention of diseases which can be treated with a RET kinase inhibitor, including RET-associated diseases and disorders.
US10144726B2
The invention provides compounds for use in the treatment of a disease or condition selected from brain disorders and triple-negative breast cancer, the compounds being of the formula (1): or a salt or tautomer thereof; wherein: X1 is N or N+(O−); X2 is N or CH; Q is selected from a C1-3 alkylene group, cyclopropane-1,1-diyl and cyclobutane-1,1-diyl; R1 is selected from hydrogen and C1-4 alkyl; R2, R3 and R4 are the same or different and each is selected from hydrogen and fluorine; Ar1 is a benzene, thiophene, naphthyl or pyridine ring optionally substituted with 1, 2 or 3 substituents selected from fluorine; chlorine; bromine; C1-4 hydrocarbyl; C1-4 hydrocarbyloxy; trifluoromethyl; difluoromethyl; cyano; trifluoromethoxy; difluoromethoxy; Ar2 is a monocyclic 5- or 6-membered heteroaryl ring containing 1, 2 or 3 heteroatom ring members selected from O, N and S and being optionally substituted with 1, 2 or 3 substituents selected from fluorine; C1-4 hydrocarbyl; amino; mono-C1-4 hydrocarbylamino and di-C1-4 hydrocarbylamino; and wherein, in each substituent consisting of or containing C1-4 hydrocarbyl, the C1-4 hydrocarbyl is selected from C1-4 alkyl, C2-4 alkenyl, C2-4 alkynyl, cyclopropyl, cyclobutyl and cyclopropylmethyl.
US10144725B2
The present invention relates to lipid compounds and uses thereof. In particular, the compounds include a class of cationic lipids having an amine moiety, such as an amino-amine or an amino-amide moiety. The lipid compounds are useful for in vivo or in vitro delivery of one or more agents (e.g., a polyanionic payload or an antisense payload, such as an RNAi agent).
US10144716B2
This invention relates to a polybenzoxazine precursor and a method of preparing the same, and more particularly, to a polybenzoxazine precursor which includes benzoxazine obtained by reacting a phenol novolak resin with an aldehyde compound and allylamine and diaminodiphenylmethane as an amine compound, and to a method of preparing the same. The polybenzoxazine precursor may serve to prepare a hardened material having excellent thermal and electrical characteristics and dimensional stability. Accordingly, the polybenzoxazine precursor may be available for use in a copper clad laminate, a semiconductor encapsulant, a printed circuit board, an adhesive, a paint, and a mold.
US10144706B2
The present disclosure generally relates to compounds useful as immunomodulators. Provided herein are compounds, compositions comprising such compounds, and methods of their use. The disclosure further pertains to pharmaceutical compositions comprising at least one compound according to the disclosure that are useful for the treatment of various diseases, including cancer and infectious diseases.
US10144702B2
A method for the manufacture of N,N-dialkyllactamide, whereby at least one of the compounds selected from the series made of alkyl lactate, lactide and polylactic acid is mixed with dialkylamine in order to form a reaction mixture, under conditions whereby aminolysis takes place in the reaction mixture. The method is characterized in that the reaction mixture further includes a Lewis acid. As a result of the method, N,N-dialkyllactamides can be manufactured in high yields and with high optical purity.
US10144692B2
This invention discloses a method of making vitamin K1. The mentioned method of making vitamin K1 comprises performing a first one-pot synthesis with base catalyst, performing a first hydrolysis, performing a substitution, and performing a second one-pot synthesis without metal oxidant. The starting material of this invention is stable 2-methyl-1,4-naphthoquinone. Preferably, this invention provides a method of making vitamin K1 efficiently on simplifying the operation and decreasing the side-product. More preferably, without metal residue, the vitamin K1 of this invention is without metal residue and more safety for clinical application.
US10144691B2
The present invention relates to a process for preparing 1-[(1R,4R/S,8S)-10,10-dimethyl-7-methylene-4-bicyclo[6.2.0]decanyl]ethanone.
US10144688B2
A method and a system for recycling spent ethylene or propylene glycol recovered from aircraft deicing solutions is described. The recovered spent ethylene or propylene glycol contains water and other undesirable substances which require to be removed to produce a solution free of these substances which can be further processed to remove substantially all of the water content and to blend-in additives required to certify the final glycol solution for aircraft deicing. The method and system employs a computer controller for continuous automatic batch processing of the spent glycol, including, in combination, filtering, distillation, blending and testing in specific sequences and achieves an improved quality recycled glycol of a purity of at least 99.5% and preferably between 99.6% to 99.9% glycol concentration.
US10144684B2
Methods include contacting a fermented gas including isoprenoid compound with a porous adsorbent and desorbing isoprenoid compound adsorbed on the porous adsorbent. The fermented gas may be obtained by culturing a microorganism having an ability to produce isoprenoid compound.
US10144679B2
The present invention provides a process for the preparation of ethene by vapor phase chemical dehydration of a feed-stream comprising ethanol and optionally water and/or ethoxy ethane, said process comprising contacting a dried supported heteropolyacid catalyst in a reactor with the feed-stream having a feed temperature of at least 200° C.; wherein before the supported heteropolyacid catalyst is contacted with the feed-stream having a feed temperature of at least 200° C., the process is initiated by: (i) drying a supported heteropolyacid catalyst in a reactor under a stream of inert gas having a feed temperature of from above 100° C. to 200° C.; and (ii) contacting the dried supported heteropolyacid catalyst with an ethanol-containing vapor stream having a feed temperature of from above 100° C. to 160° C.
US10144673B2
The invention relates to a method for producing a calcium silicate hydrate-comprising hardening accelerator in powder form, which comprises the steps of (a) providing an aqueous suspension comprising calcium silicate hydrate; (b) mixing at least one calcium compound, selected from calcium acetate, calcium formate, calcium hydroxide, calcium oxide, and mixtures of two or more of said compounds, with the aqueous suspension comprising calcium silicate hydrate; and (c) drying the resulting mixture. The invention also relates to the hardening accelerator obtainable by this method, to the use thereof, and to building material mixtures which comprise the hardening accelerator.
US10144658B2
A module for electrocoagulation of contaminated water includes a first treatment chamber that submits the contaminated water to a first electrocoagulation current, and a second treatment chamber that submits the contaminated water to a second electrocoagulation current. The module also includes an intermediate chamber between the first and second treatment chambers that collects foam and precipitates from the first and second treatment chambers and that provides a passage for water exiting the first treatment chamber and entering the second treatment chamber.
US10144643B2
A cylindrical tank-shaped container including: plural parallel electrode tubes; discharge tubes arranged inside the electrode tubes, each forming a discharge gap; a pair of end plates that penetrate and hold both of end sections of the plural electrode tubes; a cooling space formed by the pair of end plates and the inner surface of the tank-shaped container divided between end plates; a cooling medium inlet and a cooling medium outlet formed in opposite end sides of the cooling space; a raw material gas inlet that introduces raw material gas to be sent to the discharge gaps; and an outlet for ozone gas generated from the raw material gas by silent discharge in the discharge gaps, providing an electrode tube in which a discharge tube is not arranged, among the plural electrode tubes, that have surrounding coolant medium that reaches at least a prescribed temperature resulting from the silent discharge.
US10144637B2
A medical navigation system is provided. The medical navigation system includes a computing device having a processor coupled to a memory, a wireless communication component and a display for displaying an image. The medical navigation system further includes a sensor module attached to a medical device. The sensor module includes a housing for housing components of the sensor module and for attaching to the medical device, a processor housed in the housing, a memory coupled to the processor, a wireless communication component coupled to the processor, a battery coupled to the processor, and a sensor coupled to the processor. The sensor generates a signal to be transmitted wirelessly via the sensor module wireless communication component and receivable by the computing device wireless communication component, the signal representing movement of the medical device.
US10144634B2
A semiconductor package and a method of manufacturing a semiconductor package. As a non-limiting example, various aspects of this disclosure provide a semiconductor package, and a method of manufacturing thereof, that comprises a first semiconductor die, a plurality of adhesive regions spaced apart from each other on the first semiconductor die, and a second semiconductor die adhered to the plurality of adhesive regions.
US10144624B1
A mute hand winch includes a supporting system, a drive system and a braking system. The drive system includes a drive shaft, a capstan assembly and a first gear. Both the drive shaft and the capstan assembly are disposed at the base, the first gear is in threaded connection with the drive shaft, and the first gear is engaged with the capstan assembly. The braking system includes a second gear and a third gear. The second gear is sleeved on the drive shaft and is located at one side of the first gear. There is a gap between the first gear and the second gear. The first gear and the second gear are selectively attached and locked tightly to prevent the first gear and the capstan assembly from rotating. The third gear is fixed at the base, and the third gear has an unilateral bearing.
US10144617B2
A computer-implemented method according to one embodiment includes monitoring and collecting data associated with one or more users of a moving platform, analyzing the data, identifying a predetermined event, based on the analyzing, and adjusting one or more aspects of the moving platform, based on the predetermined event.
US10144591B2
Robotic arms or manipulators can be used to toss inventory items within an inventory system. Tossing strategies for the robotic arms may include information about how a grasped item is to be moved and released by a robotic arm to achieve a trajectory for moving the item to a receiving location. A tossing strategy may also use a trajectory that avoids time and/or space reserved for a trajectory of another tossed item. The receiving location can include surfaces and/or other features that can be manipulated for receiving the item based on one or more characteristics of the tossed item and/or a trajectory of the tossed item.
US10144586B2
The invention relates to a receptacle for storage of an object, containing a proximity sensor capable of detecting an action by a user close to or in contact with a surface of the receptacle, a transducer and a control circuit comprising an input coupled to the proximity sensor and an output connected to the transducer, the control circuit being configured to generate a control signal to be sent to the transducer when a user action is detected by the proximity sensor, characterized in that it also comprises an unpacking detector coupled to the control circuit and in that the control circuit is also configured to changeover from a standby mode during which it periodically awakens to query the unpacking detector, to a detection mode during which it periodically checks the state of its input coupled to the proximity sensor, after the unpacking detector has detected removal of the receptacle from a packaging.
US10144580B2
A brew basket is provided for use in a beverage brewing machine. The brew basket includes a body defining a brewing reservoir that extends along a longitudinal length from an open top to a bottom end having one or more openings. The brewing reservoir has an internally tapered multi-sided three-dimensional (3D) shape. The brewing reservoir having a first cross-sectional area at the open top that progressively narrows along the longitudinal length of the multi-sided 3D shape to a smaller second cross-sectional area proximate to the one or more openings at the bottom end. The open top is configured to receive heated water from the brewing machine during a brewing operation with brewed beverage discharging from the one or more openings. The multi-sided 3D shape of the brewing reservoir configured to receive a filter pack having a generally tapered multi-sided 3D shape similar to the multi-sided 3D shape of the brewing reservoir.
US10144576B2
A stack including a plurality of sheets of web material is provided. The stack includes a plurality of bundles of substantially coextensive sheets of web material. Each bundle includes at least two sheets of web material of said plurality of sheets of web material. In the stack, the bundles of said plurality of bundles are alternatingly offset in relation to each other. Further, a method of dispensing at least two sheets of web material is disclosed.
US10144574B2
An insert used in conjunction with a pill container consisting of a circular alignment plate or dialer and base. The alignment plate contains a plurality of opening of various sizes and shapes. The circular base contains one opening, preferably equal in size and shape to the largest opening on the alignment plate or dialer. The two components are connected at the center point so that the dialer or alignment plate may rotate to align one of the openings on the alignment plate with the opening of the base. The alignment of the openings allows the user to control, limit or restrict the dispensing of pills located in the container while also providing addition safeguards.
US10144561B2
A cap assembly for conveying air into the interior of a container and water from the interior of the container, the cap assembly comprising a valve moveable from a first position, in which the cap assembly is closed, to a second position, in which the cap assembly is open to permit the flow of air and water through the cap assembly, the cap assembly further comprising at least two apertures through which the air and water can flow when the cap assembly is open, wherein the apertures are offset with respect to one another in a direction along the longitudinal axis of the cap assembly.
US10144559B2
The invention relates to the modification applied to different types of containers made from glass or other materials in order to render them unusable as original containers. The invention consists in the modification of the design, structure and production of any container, forming same in two parts connected by a tubular element surrounded by a plastic or other material which provides rigidity, but which also facilitates the disablement thereof by means of the application of a force by the consumer, facilitating the breakage thereof and preventing the subsequent use thereof as original container. In terms of the historical development of containers, this application is novel in that it can be used to eliminate the forgery of containers or bottles used in international and national perfumery, wine, pharmaceutical and other industries, providing an instrument which is more than effective in controlling forgery and adulteration in the above-mentioned markets.
US10144558B2
The invention pertains to a container (1) with at least a box-shaped lower part (2) and a lid part (6) both connected by a pivoting means (3) such that the lid part is pivotable between a closed position (5) and an open position (4). The pivoting means (3) comprises a first bolt (7) assigned to the lid part (6) and a second bolt (8) assigned to the lower part (2), which bolts are pivotally connected to each other, wherein the second bolt (8) is slidably supported in longitudinal direction in the lower part (2) between an inserted position and an extracted position, and where in particular the second bolt (8) is slidable in longitudinal direction in a receiving sleeve (9) between said inserted and extracted positions, which receiving sleeve (9) is supported in the lower part (2) to be releasable from the side of the lid part (6).
US10144555B2
The present invention provides a container for drinking fluids wherein the container has an integrated interior compartment for storing solid elements used for treating drinking fluids. The interior compartment includes a plurality of perforations that allow the fluid found in the container to flow through the interior compartment to allow such fluid to interact with the contents of the interior chamber. The interior chamber may include a compound for treating the fluid and for forming, for example, alkaline water. The treatment compound is compressed into solid beads that will interact with the drinking fluid but will not substantially dissolve. In one embodiment the treatment compound comprises of Tourmaline, Kaoline, Magnesium, Magnesium Oxide, Silicone Dioxide and Calcium Oxide.
US10144553B2
The present invention relates to a new, adhesively bonded packaging system for foods, more particularly for dairy products.
US10144546B2
A label position detector has a sensor, a support member configured to support a strip-shaped liner sheet of a continuous label body, and an opening/closing member provided openably or closably against the support member. The opening/closing member has a main body installed with the sensor and a cover provided with a slot that causes the sensor to face the conveyance passage for the continuous label body and detachably installed on the main body.
US10144536B2
A vibrating device is incorporated in a packaging machine to vibrate packaging bags filled with articles. The vibrating device includes a tapping plate disposed below the bags, a servomotor having an output shaft, a selection unit selecting one of vibration patterns set according to sizes of the bags or types of the articles, an output unit delivering data of a rotation pattern of the output shaft, and a control unit controlling the output shaft according to the rotation pattern based on the delivered rotation data. When one vibration pattern is selected according to the size of the bag or the type of the articles, the control unit controls the output shaft according to the rotation pattern corresponding to the vibration pattern, so that the tapping plate connected via a link mechanism to the output shaft is vibrated up and down in the selected vibration pattern to vibrate the bag.
US10144534B2
Disclosed is a spacecraft including:—a housing defining an inner space and an outer space, the housing having a first surface and a second surface opposite the first surface; a first radiator and a second radiator supported by the first surface and the second surface, respectively, the first radiator and the second radiator each having a main inner surface, a main outer surface opposite the main inner surface and side surfaces. The spacecraft further includes a first auxiliary radiator and a first auxiliary heat-transfer device thermally connecting the first auxiliary radiator to the main inner surface of the second radiator, the first auxiliary radiator being arranged in a first portion of the outer space, the first portion being defined by the main outer surface of the first radiator and by the first planes containing the side surfaces of the first radiator.
US10144533B2
A space-based solar power station, a power generating satellite module and/or a method for collecting solar radiation and transmitting power generated using electrical current produced therefrom is provided. Each solar power station includes a plurality of satellite modules. The plurality of satellite modules each include a plurality of modular power generation tiles including a photovoltaic solar radiation collector, a power transmitter and associated control electronics. The power transmitters can be coordinated as a phased array and the power generated by the phased array is transmitted to one or more power receivers to achieve remote wireless power generation and delivery. Each satellite module may be formed of a compactable structure capable of reducing the payload area required to deliver the satellite module to an orbital formation within the space-based solar power station.
US10144526B2
An engine attachment system (EAS) includes a forward collar (202), an aft collar (204), at least one truss subassembly (216) disposed between the forward collar and the aft collar for supporting an engine, and at least one vibration isolator (206,208) integrated with each of the forward and aft collars for isolating engine vibration and reducing noise. A method of attaching a turboprop engine includes providing an EAS and hoisting a turboprop engine at least partially within the at least one truss subassembly (216).
US10144519B2
A gas turbine engine includes a fan, a compressor section having at least two sequential compressors, a combustor section fluidly connected to the compressor section, and a turbine section fluidly connected to the combustor section. The turbine section includes at least a first turbine, a second turbine and a third turbine. One of the first turbine, the second turbine and the third turbine is a fan-drive turbine. An environmental control system air supply includes at least a first compressor bleed and a second compressor bleed. Each of the first compressor bleed and the second compressor bleed are positioned upstream of a highest pressure compressor of the at least two compressors.
US10144518B2
A combination includes a selectively driven fan and a bypass flow passage for bypassing the fan. The bypass flow passage communicates with a first check valve to allow air to flow from the bypass passage to a downstream location. A second check valve allows air driven by the fan to pass into a return passage and return to an inlet of the fan in the event that the discharge pressure from the fan overcomes a spring force associated with the second check valve. A heat exchanger pack and an environmental control system for use on an aircraft, and a method are all also disclosed.
US10144517B2
An airplane is provided. The airplane includes a first medium at a first pressure, a second medium at a second pressure, a third medium at a third pressure; and an air conditioning system. The air conditioning system includes a compressor, a first heat exchanger configured to transfer heat from the first medium to the third medium, a second heat exchanger configured to reject heat from the first medium, a third heat exchanger configured to reject heat from the second medium, a first turbine configured to receive the first medium, and a second turbine configured to receive the second medium.
US10144511B2
Various embodiments of the present disclosure provide a helicopter-mediated system and method for launching and retrieving an aircraft capable of long-distance efficient cruising flight from a small space without the use of a long runway.
US10144501B2
The device for automatic management of an actuator controlled by a servo-valve, includes a sensor for measuring the actual value of a parameter at the output of the actuator for a given control command, a computation unit for computing a theoretical value of said parameter, by applying the control command to a nominal performance model which models the operation of the actuator exhibiting nominal performance, a computation unit for computing the difference between the measured actual value of the parameter and the computed theoretical value of said parameter, a control unit for computing an adapted gain as a function of this difference, and a link for applying the adapted gain to the servo-valve for it to use it as gain value, so as to allow the actuator to restore nominal performance.
US10144500B2
A nacelle having a longitudinal axis and comprising a chassis, two articulated fan cowl doors and a sliding fan cowl door. Each articulated fan cowl door is rotatably mounted in an upper portion of the chassis, each about their own opening axis. The opening axes are parallel to the longitudinal axis. The articulated doors pivot between a closed position and an open position. The sliding fan cowl door, in its closed position, is placed between free edges of the articulated fan cowl doors. A sliding arrangement for the sliding door is configured such that, in the open position of either articulated door, the sliding fan cowl door can rotate about the longitudinal axis. The nacelle has fan cowl doors which take up less space when in the open position and which are more compact, in comparison to articulated fan cowl doors without a sliding fan cowl door.
US10144497B2
A door frame for an aircraft includes first and second beams, each having a first end and a second end. The second beam is substantially parallel to the first beam. A third beam extends from the first end of the first beam to the first end of the second beam. The third beam is substantially perpendicular to the first beam and the second beam. A first flange extends from the second end of the first beam in a direction that is away from the second beam. The first flange is substantially perpendicular to the first beam.
US10144496B2
An atmospheric balloon includes an upper apex and a lower apex and a balloon membrane. The balloon membrane includes a plurality of balloon gores. The balloon gores extend between the upper and lower apexes. One or more of the balloon gores includes upper straight line gore edges and lower straight line gore edges. The upper and lower straight line gore edges are coupled along one or more corresponding upper and lower straight line gore edges of adjacent balloon gores of the plurality of balloon gores. The one or more balloon gores are formed with cutting the gore material along a straight line cutting edge to form the upper and lower straight line gore edges.
US10144484B2
A bicycle hydraulic operating device is provided with a cylinder including a cylinder bore, a first reservoir tank including a first reservoir opening, and a second reservoir tank including a second reservoir opening. The first reservoir tank is in fluid communication with the cylinder bore, and the second reservoir tank is in fluid communication with the cylinder bore.
US10144477B2
A gear drive balancing scooter is provided that has a left side, a right side, and a center section located between the left and right side. The center section is coupled to the right and left sides through a gear. As the left side moves with respect to the center section, the right side moves in an opposite direction with respect to the center section. Both sides have a respective wheel motor assembly that is used to balance the scooter. To steer the scooter, the user angles one side differently than the other side. The angle of each side determines the rate and direction that each wheel motor assembly rotates. An optional staff extends upwardly from the center section to provide stability.
US10144475B2
A system used to control the orientation of a vehicle's suspension. The system includes a control system receiving input data from a plurality of sensors concerning the relative motion, speed, and orientation of the vehicle. The control system is configured to process the input data and actively control the orientation of the suspension system by selecting a suitable driver speed and tilt angle according to external conditions.
US10144474B2
Bicycle collision systems, apparatus, and methods may include, or use, one or more various sensing apparatus to detect vehicles or other objects that may collide, or potentially collide, with a bicycle. The sensing apparatus may include at least one of side sensing apparatus, rear sensing apparatus, and front sensing apparatus. Further, alert apparatus may be used to alert not only the cyclist but also the driver of a vehicle of an imminent collision.
US10144473B2
A straddle-type vehicle includes a front cowling covering a front portion of a vehicle body; and an aerodynamic device including an aerodynamic force generating section which generates a downforce by air flowing in a rearward direction along an upper surface of the front cowling, and the aerodynamic force generating section is placed to overlap with the upper surface of the front cowling, when viewed from above.
US10144470B2
A vehicle seat includes a cushion material and a cover for covering the cushion material. The cover includes a load receiving portion configured to receive a load of a seated occupant. The load receiving portion includes a large thickness portion and a small thickness portion that are located next to each other in a first direction that intersects with a thickness direction of the cover. Each of the large and small thickness portions includes an elastic layer compressive in the thickness direction and a lower cover layer located closer to the cushion material than the elastic layer in the thickness direction. The elastic layer of the small thickness portion is compressed such that the thickness of the small thickness portion is smaller than the thickness of the large thickness portion. The lower cover layer of the large thickness portion is partially cut off to form a cutoff portion.
US10144466B2
A method for manufacturing a vehicle frame is disclosed. An upper body of the vehicle frame is formed, the upper body configured to be joined with an underbody of the vehicle frame at a first component of the upper body. The underbody of the vehicle frame is formed, the underbody configured to be joined with the upper body at a first component of the underbody. After forming the upper body and the underbody, a point on the upper body is aligned with a desired position for the point, independent of an alignment between the first component of the upper body and the first component of the underbody. After aligning the point on the upper body with the desired position for the point, the first component of the upper body is joined to the first component of the underbody.
US10144460B2
The invention relates to a suspension device for tracked vehicles, which vehicle comprises at least one pair of track assemblies, where each track assembly of the pair of track assemblies comprises a track support beam, at least one drive wheel, a plurality of support wheels and an endless track, wherein the drive wheel and the plurality of support wheels are rotatably secured to the track support beam. The drive wheel is arranged to drive the endless track running over the at least one drive wheel and the plurality of support wheels. The suspension device comprises a first suspension configuration constituting a support wheel suspension configuration configured to resiliently secure the support wheels to the track support beam, and a second suspension configuration configured to connect the track assembly pair with a centrally arranged center beam. The invention also relates to a tracked vehicle.
US10144446B2
An apparatus for controlling a vehicle includes a power steering adjuster that adjusts an amount of an assistance in a steering to be provided by a power steering in accordance with a change in a state quantity related to an ease of a steering, and a steering stability controller that controls a control amount to perform a driving force control on a wheel of a vehicle in accordance with the change in the state quantity.
US10144442B2
A stroller frame having forwardly extending right and left side front supports, rearwardly extending right and left side rear supports, and upwardly extending right and left side handle supports moveable connected to permit movement of the frame between deployed and collapsed orientations, and a downwardly folding seat frame connected to the front and rear supports having right and left side fold mechanisms which are configured to lock the frame in the deployed configuration, apply a biasing force to fully deploy the seat frame during the unfolding movement, and isolate the biasing force while applying a folding force to the seat frame during the folding operation, actuation of the fold mechanisms based on frame orientation and position of a release handle.
US10144435B2
An in-vehicle apparatus is provided which is installed in a vehicle including a power supply. The apparatus includes at least one drive circuit that is driven by DC voltage supplied from the power supply, and a positive electrode side line that electrically connects a positive electrode terminal of the power supply and a high-electric potential side electrical path of the drive circuit. A negative electrode terminal of the power supply and a low-electric potential side electrical path of the drive circuit are electrically connected to a body ground of the vehicle. The apparatus includes an auxiliary line that has a first end electrically connected to the positive electrode terminal or the negative electrode terminal and a second end connected to the high-electric potential side electrical path or the body ground, and that is arranged along the positive electrode side line or the body ground.
US10144429B2
A control method of a vehicle includes executing one of a plurality of clutch protection logics according to estimated clutch temperatures by a controller. A control constant is counted according to the executed clutch protection logic by the controller. At least one of a shift pattern and an engine revolutions per minute (RPM) are adjusted based on the counted control constant.
US10144427B2
Methods, systems, and apparatus for predicting the braking or acceleration of a vehicle. The pedal change prediction system includes a braking sensor for providing braking data or an acceleration sensor pedal for providing acceleration data. The pedal change prediction system includes an electronic control unit that is configured to determine a rate of depression of the brake pedal or the acceleration pedal that is associated with a first braking force or a first acceleration force. The electronic control unit is configured to predict a triggering event that is either a braking event or an acceleration event. The electronic control unit predicts the triggering event based on the rate of depression of the brake pedal or the acceleration pedal and causes the vehicle to apply a second braking force or a second acceleration force.
US10144425B2
A control device detects a first vehicle traveling in front of an own vehicle using a front looking radar device, and detects a second vehicle which is predicted to cut in between the own vehicle and the first vehicle using the front looking radar device and/or front-side looking radar devices. The control device calculates a first target acceleration required for the own vehicle to maintain an inter-vehicle distance between the own vehicle and the first vehicle at a first set inter-vehicle distance; and calculates a second target acceleration required for the own vehicle to maintain an inter-vehicle distance between the own vehicle and the second vehicle at a second set inter-vehicle distance. The control device selects either the first target acceleration or the second target acceleration and controls the own vehicle in such a manner that an actual acceleration of the own vehicle becomes closer to the mediated target acceleration.
US10144420B2
A method for controlling a path of an autonomous driving system includes: determining whether or not an obstacle and an autonomously driven vehicle will collide when a sensor detects an obstacle in a proximity of the vehicle while the vehicle is being autonomously driven; generating a plurality of path candidates within a path generation region when it is determined that the detected obstacle and the vehicle will collide; determining whether or not an expansion of the path generation region is possible, expanding the path generation region when it is possible, and regenerating the plurality of path candidates within the expanded path generation region when there is no path candidate in which the collision between the obstacle and the vehicle does not occur; and selecting a path from among the path candidates in which the collision between the obstacle and the vehicle does not occur.
US10144417B1
A hitch assist system and method are provided herein. A detection system determines a vehicle heading and a trailer heading. A controller is coupled to the detection system for generating a path along which the vehicle is autonomously maneuvered toward a trailer. The path ends at a final position in which the vehicle and trailer headings are related by a specified angle therebetween.
US10144412B2
An initial variation learning control is executed when a learning condition is satisfied each time the learning condition is satisfied, with the aim of absorbing initial variations of manufacturing errors or variations of components of a second clutch (CL2). When the number of times of learning control is counted and this becomes a predetermined number (e.g. five times), after that, a deterioration variation learning control, which is equivalent to the initial variation learning control, is executed only once a trip from ON of a key switch to OFF of the key switch. With this, a frequency of execution of the learning control can be reduced, and the number of times of the learning can be reduced. It is therefore possible to suppress energy consumption and improve energy efficiency in stand-by pressure learning control of the second clutch that serves as a starter clutch.
US10144407B2
A method and system of controlling a configuration of a vehicle power-assisted steering (PAS) system is provided. The method includes detecting at a vehicle a change between two-wheel-drive driveline operation and four-wheel-drive driveline operation; accessing a pre-defined PAS profile stored at the vehicle based on the detected change; and operating the vehicle PAS system using at least one variable included in the PAS profile in response to the detected change in driveline operation.
US10144396B1
A vehicle wash control system for controlling the amount of wash product applied to a vehicle based on environmental or other conditions, sensed locally or controlled/sensed remotely. The vehicle wash control system generally includes one or more electronic control valves that may be controlled by a control unit that receives inputs from a sensor or remotely which adjusts the flow of wash products responsive to the inputs.
US10144390B1
A remote start system for a work vehicle includes a communication unit configured to receive a remote start input signal; optical sensors providing a first image of the work vehicle or work vehicle environment; and a controller including at least a start module and a verification module. The start module is configured to generate a verification request in response to the remote start input signal. In response to the verification request, the verification module is configured to confirm that the first image satisfies a verification condition and to generate a verification confirmation when the first image satisfies the verification condition. The start module is configured to generate a start command in response to the verification confirmation. The remote start system further includes a starter device coupled to the controller and configured to energize a prime mover of the work vehicle upon receipt of the start command from the controller.
US10144386B2
A belly pan is provided for a motor vehicle. The belly pan includes a body having at least one stiffener with a forwardmost zone of peak section force F1, an intermediate zone of peak section force F2 and a rearwardmost zone of peak section force F3 where F1
US10144385B2
An airbag includes a panel and a strip. The panel defines an inflation chamber inflatable to an inflated position. The panel includes a top and a bottom spaced from the top along an axis in the inflated position. The strip is connected to the panel and disposed external to the inflation chamber. The strip is elongated in a direction from the top to the bottom of the panel. During a vehicle impact, the momentum of the occupant may move the occupant towards the strip. The strip may absorb energy from the occupant to reduce or prevent the head of the occupant from rotating.
US10144382B2
A steering column system of a vehicle includes: a rotatable, hollow steering shaft that has a proximal end attached to a steering wheel and is configured to transfer rotational input at the steering wheel to a steering rack of the vehicle; a stationary driver-side airbag (DAB) shaft that is surrounded by the steering shaft and extends along the steering shaft; and a DAB module that contains an airbag and is fixedly mounted to a proximal end of the DAB shaft within a region of the steering wheel. The airbag contained in the DAB module is formed to have a substantially circular center chamber and a pair of side extension chambers, one of the side extension chambers disposed on a right side of the center chamber, and the other of the side extension chambers disposed on a left side of the center chamber.
US10144376B2
A crush assembly for a vehicle is provided. The crush assembly includes a fiber-reinforced composite crush member and a cap assembly. The cap assembly is disposed on a terminal end of the crush member. The cap assembly includes an outer cap and an inner cap. The outer cap has a first base, a first side wall extending from the first base, and an interior portion formed by the first base and the first side wall. The inner cap includes a second base and a second side wall extending from the second base. The inner cap is nested at least partially within the interior portion.
US10144371B1
A grounding element is provided. The grounding element includes a metal plate; and a metal block attached to the metal plate. The grounding element may be welded to a body or frame of a vehicle and used to provide a plurality of attachment points for a vehicle wiring harness.
US10144370B2
Provided is a cable holder including a strap arranged in parallel with any one of a wire inserted into a car seat or a cable inserted into the seat, a fastening device which integrally couples the strap with one of the wire or the cable, and a tie which is coupled with the strap and coupled with another one of the wire or the cable.
US10144365B2
A badge is provided herein. The badge includes a substrate coupled to a bezel. One or more apertures are defined by the substrate and extend from a front portion to a rear portion of the substrate. One or more troughs are defined by the substrate and are disposed on a rear portion of the substrate. An overmold material is disposed on the front portion of the substrate, through the one or more apertures, and within the one or more troughs.
US10144358B2
A modular rack system having a spine having a top end, a bottom end, a front surface, and a back surface; a hanger mounted to the spine, the hanger having at least partially cylindrical side surface; and a foot mounted to the spine longitudinally between the hanger and the bottom end, the foot having a foot volume.
US10144350B2
It is an object of the present invention to provide a technology capable of increasing accuracy of determining a failure in a lighting device. A video acquisition unit acquires a video of an area including an illumination target area of a lighting device. A determination unit determines whether the lighting device is faulty on the basis of a video of the illumination target area of the video acquired by the video acquisition unit in cases in which an ON signal is supplied to the lighting device and a current position acquired by a position acquisition unit is a predetermined determination position where determination of a failure should be performed.
US10144344B2
An illumination apparatus includes: a light source including an LED and a lens; an illuminated body; and a cover, wherein: the light source is arranged inside the cover; the light from the light source passes between the edge of the cover and the illuminated body; the front edge of the cover defines the illumination range of the light from the light source with respect to the illuminated body; and the light transmittance of such portion of the lens as is near to the illuminated body is higher than that of the remaining portions.
US10144341B2
A vehicular lighting system includes low beam headlamps, high beam headlamps and a control unit configured so that during operation of the lighting system, the control unit determines the operational status of the high beam headlamp and selectively adjusts the illuminating intensity of the low beam headlamp. In particular, the brightness of the low beam headlamp can be increased during periods where the high beam is not being, thereby allowing the low beam to more closely approximate the brightness of the high beam, but without the glare associated with conventional high beam patterns. In this way, artificially low illuminating intensity limitations placed on the low beam headlamps can be overcome during periods where the lighting system is operating but the high beams are not in use. In one preferred configuration, at least the low beam headlamps are made from numerous individual light-emitting diodes that can be separately controlled in order to achieve the adjustments in low beam headlamp illuminating intensity.
US10144337B1
A vehicle light assembly includes a light source. A lens is positioned proximate the light source. A conductive circuitry is disposed on the lens and forms a capacitive sensor. A temperature sensor is configured to detect a temperature of the light source.
US10144327B2
A vehicle seat includes a seatback and a side armrest. The side armrest includes an elongate frame anchored to the seatback and an elongate cover supported on the frame. The frame includes a base segment, by which the frame is anchored to the seatback, and a pivoting distal segment. With the frame's base segment extending away from the seatback, the side armrest is reconfigurable between an armrest configuration and an auxiliary configuration. In the armrest configuration, the frame's distal segment is inline with its base segment, the cover covers the frame, and the cover is supported on the frame for sliding movement along the frame that culminates in lodgment onto its distal segment. In the auxiliary configuration, the cover is lodged onto the frame's distal segment, and the frame's distal segment is pivoted towards the seatback to position the cover to extend in front of the seatback.
US10144320B2
A trim cover assembly securable over a cushion is provided. The trim cover assembly includes a leather trim material. A trim fastener is attached to the leather trim material for retaining the trim cover to the cushion. Therein the trim fastener elastically deformable so that the fastener that elongates between an extended position and a retracted position to allow the leather trim material to expand while minimizing deformation.
US10144314B2
A vehicle seat frame comprising a first adjusting part and a second adjusting part which is pivotable relative to the first adjusting part, at least two detent fittings by means of which the first adjusting part and the second adjusting part are connected together, wherein the at least two detent fittings hold the two adjusting parts in position relative to each other in a locked state and are able to be unlocked from each other in order to pivot the two adjusting parts, an actuating device which is connected to a first of the at least two detent fittings for unlocking the first of the at least two detent fittings and a coupling device by means of which the at least two detent fittings are coupled together for a common unlocking process. The coupling device comprises a tensile element which is designed to transmit a tensile force.
US10144312B2
A vehicle seat includes: a seating portion configured to support a seated occupant in a seating posture; a shell portion configured to cover the circumference of the seating portion including side portions of the seated occupant from a rear side of the occupant; a first moving device that is configured to move a relative position of the seating portion with respect to a vehicle; and a second moving device that is configured to move a relative position of the shell portion with respect to the seating portion, the second moving device being configured to move at least side portions of the shell portion to a first position at which the side portions of the seated occupant is covered by the shell portion and to a second position at which the side portions of the seated occupant is uncovered by the shell portion.
US10144307B2
A management system of a vehicle battery replacement system has a plurality of battery replacement stations for replacing a depleted battery pack of an electric vehicle with a charged battery pack. Each battery replacement station includes a coordinating device. The management system also has a control system in communication with the coordinating devices of the battery replacement stations and a plurality of client devices. The control system is configured to receive a request for a battery replacement operation from a client device, and select a battery replacement station of the plurality of battery replacement stations for performing the battery replacement operation.
US10144306B2
A vehicle includes a battery health evaluation system. A vehicle battery is electrically loaded upon determining that an ambient temperature equals or exceeds a first temperature. A voltage of the battery is measured during loading. A magnitude of the voltage plateau is determined. The battery is identified as inadequate upon determining that the magnitude of the plateau is less than the target voltage.
US10144303B2
Methods and systems for monitoring a vehicle. In a parked state of the vehicle, the control unit of the vehicle is deactivated, and the signals of some of the sensors of the vehicle are detected and evaluated by way of a separate detecting unit. If, based on the sensor signals evaluated in this way, a defined event is detected, the previously deactivated control unit can be activated. Thus, the operating time of the control unit is minimized over the total life span of the vehicle.
US10144302B2
Systems and methods for a twisted rectangular litz wire for generating or receiving wireless electrical power. The rectangular litz wire may be arranged as a DD coil having first and second co-planar loops. The loops may have a shared single-stacked inner portion and double-stacked outer portions. The litz wire may be twisted between the inner and outer portions, such that a width of the coils at the outer portions is defined by a first longer side of the wires, and a width of the coils at the inner portion is defined by a second shorter side of the wires. This arrangement may reduce a size of the DD coil may reducing a width of the shared inner portion.
US10144301B2
A wireless power transfer system for charging a battery located in a vehicle includes a primary side network and a secondary side network. The primary side network includes a transmitting coil and a primary side compensation network. The primary side compensation network includes a primary compensation coil. The secondary side network includes a receiving coil and a secondary side compensation network. The secondary compensation network includes a secondary compensation coil. The primary compensation coil and the secondary compensation network has one of an unipolar coil design and a bipolar coil design, and the transmitting coil and the receiving coil has the other one of the unipolar coil design and the bipolar coil design.
US10144293B2
Provided is a driving force control device capable of stabilizing a vehicle behavior when a driving torque of a drive wheel is controlled. When slip suppression control is carried out to decrease a driving torque of a drive source that is connected to the drive wheel of a vehicle via a speed reduction mechanism and a drive shaft, and is configured to generate a torque for braking or driving the drive wheel, to thereby suppress a slip state of the drive wheel, the driving torque of the drive source is controlled so that a slip ratio of the drive wheel is in an area of the slip ratio smaller than a slip ratio corresponding to a peak value of a road surface friction coefficient in a characteristic of the road surface friction coefficient with respect to the slip ratio.
US10144287B2
A vehicle display device includes an image display device disposed in front of a driver aboard a vehicle, and configured to display thereon at least information on traveling conditions of the vehicle, the image display device including an image display region. When an operation input turning on a power supply of the vehicle is provided, the image display device starts an opening presentation thereon in conjunction with the start of an opening presentation on another display device disposed in front of the driver. The image display device displays thereon a predetermined image in a part of the image display region until starting the opening presentation after the operation input is provided.
US10144285B2
In a method for operating vehicle devices in which different information is shown for different viewing angles on a display of a display device, seating positions of users are assigned to the viewing angles, the position of an object in a switching zone is detected and a switching signal assigned to the switching zone is generated, the seating position of a user assigned to the object is identified, and a control signal for the vehicle devices and/or the display device is generated as a function of the switching signal and of the seating position of the user who triggered the switching signal. Furthermore, an operating device for vehicle devices includes an input unit and a display unit having a display with which different information is able to be displayed for different viewing angles, seating positions of users being assigned to the respective viewing angles. The operating device includes a device for detecting the position of an object in a switching zone, a device for identifying the seating position of a user assigned to the object, and a control device, with which a control signal is able to be generated for the vehicle devices and/or the display device as a function of the detected position of the object and of the seating position of the user.
