摘要:
A cellular wireless packet data communication system containing transmit-only endpoint devices which transmit to receive-only base stations. The system is configured to allow for large area coverage (e.g., a metropolitan area) with far fewer number base stations than are required with conventional two-way cellular systems. The base station coverage areas are configured to overlap, allowing for reception of packets at multiple base stations. A data concentrator resolves redundantly received messages. The network is configurable as a WAN, a LAN, or a combination of the two. Novel modulation techniques (e.g., a 16QAM submodulation together with a 7FSK modulation) are used such that low cost components can be used in the transmitters and receivers while achieving outstanding probability of success performance. The endpoint devices are battery operated and accordingly, are designed for low power consumption and multi-year battery life. The system is used in a variety of applications including remote monitoring and mobile communications.
摘要:
A cellular wireless packet data communication system containing transmit-only endpoint devices which transmit to receive-only base stations. The system is configured to allow for large area coverage (e.g., a metropolitan area) with far fewer number base stations than are required with conventional two-way cellular systems. The base station coverage areas are configured to overlap, allowing for reception of packets at multiple base stations. A data concentrator resolves redundantly received messages. The network is configurable as a WAN, a LAN, or a combination of the two. Novel modulation techniques (e.g., a 16QAM submodulation together with a 7FSK modulation) are used such that low cost components can be used in the transmitters and receivers while achieving outstanding probability of success performance. The endpoint devices are battery operated and accordingly, are designed for low power consumption and multi-year battery life. The system is used in a variety of applications including remote monitoring and mobile communications.
摘要:
A remote endpoint monitor device includes a remote endpoint device including a meter, a position locator, a frequency selector, and a communication unit. The meter is configured to measure a service parameter to provide a measured service parameter value. The position locator is configured to determine a position of the remote endpoint device. The frequency selector is configured to select a transmission frequency device based on the determined position. The transmitter is configured to transmit service information data including the service parameter value at the transmission frequency selected by the frequency selector. A method of a remote endpoint monitor device includes measuring a service parameter, determining a position of the remote endpoint device, selecting a transmission frequency of the remote end point device, and transmitting service information data at the transmission frequency. Thus, the remote endpoint monitor device is capable of handling an automatic frequency switchover without direction provided externally.
摘要:
A mobile multifrequency transmitter includes a self-locator, a frequency selector, and a communication unit. The self-locator is configured to determine a current self location without transmitting an outgoing signal, and to provide the self location to the multifrequency transmitter. The frequency selector is configured to select a usable frequency based on the current self location. The communication unit is configured to transmit on said selected usable frequency. A mobile communication method includes the steps of obtaining a current self location from a self-locator without transmitting an outgoing signal, looking up in a database an allowable frequency band corresponding to the current self location, and transmitting on the allowable frequency band. Thus, the mobile multi-frequency transmitter is capable of handling an automatic frequency switchover without the need for higher level cellular direction.
摘要:
A method, apparatus, computer-based product and system employs a digital receiver (or transceiver) to receive, digitize and process a direct sequence spread spectrum signal using efficient, low-cost digital signal processing components. A radio front end portion of the receiver receives and digitizes the signal, and a digital signal processing portion downconverts and despreads the signal by applying a pseudorandom noise (PN) code, used at a transmitter to spread a data signal contained in the direct sequence spread spectrum signal, to the received signal. In order to initially align, and maintain alignment of, the PN code with the direct sequence spread spectrum signal, a timing and state control mechanism is included that provides time reference correction information to the signal processing components of the receiver. This time reference correction information allows the receiver to be compatible with transmitters using inaccurate frequency references which impart a significant frequency ambiguity in the received signal. Additional features include computer-based synchronization methods and mechanisms suitable for use for low performance digital signal processors and employ power management mechanisms that enable long-term operation using battery power. The power management mechanisms enable the receiver to operate in a network setting, over the course of multiple years off battery power, with similar receivers, transmitters and transceiver that communicate with one another using direct sequence spread spectrum signals.
摘要:
A method utilizing intentionally generated in-band frequency harmonics to compensate for frequency error and frequency drift in a voltage controlled oscillator of a receiver, thereby eliminating the frequency synthesizer and RF divider required in conventional designs. The method includes modulating the intentionally generated frequency in a predetermined manner so that a receiver can identify the intentionally generated frequency and includes the use of plural frequency harmonics for use in a curve fitting technique to correct frequency error in the voltage controlled oscillator.
摘要:
A wireless alarm system using spread spectrum transmitters, fast frequency shift keying, spread spectrum receivers and computer with a display. The spread spectrum transmitter includes an oscillator coupled to a microprocessor with chip code generation means, preamble register, address register and data register. The spread spectrum receiver acquires synchronization of the spread spectrum signal using a microprocessor coupled to the quieting, signal strength or baseband output of the receiver, with a two step algorithm. The steps comprise achieving a coarse lock and a fine lock to the spread spectrum signal.
摘要:
A system and method for receiving direct sequence spread spectrum transmissions with both chip code and frequency uncertainty including a parallel frequency acquisition technique for increasing receiver sensitivity and increasing process gain while reducing a preamble duration required for spread spectrum acquisition. The system and method include techniques for reducing effects of jamming and impulse noise on receiver performance via enhanced antenna diversity by constructively combining received signals. Further, techniques are provided which compensate for chip code alignment drift, providing an associated transmitter maintains carrier and chip code coherence, by comparing received signal energies at varying chip code alignments. These techniques enable the use of lower cost frequency setting crystals in both the receiver and transmitter as well as provide for system operation over a wider temperature range.
摘要:
A method utilizing intentionally generated in-band frequency harmonics to compensate for frequency error and frequency drift in a voltage controlled oscillator of a receiver, thereby eliminating the frequency synthesizer and RF divider required in conventional designs. The method includes modulating the intentionally generated frequency in a predetermined manner so that a receiver can identify the intentionally generated frequency and includes the use of plural frequency harmonics for use in a curve fitting technique to correct frequency error in the voltage controlled oscillator.
摘要:
A wireless alarm system using spread spectrum transmitters, fast frequency shift keying, spread spectrum receivers and computer with a display. The spread spectrum transmitter includes an oscillator coupled to a microprocessor with chip code generation means, preamble register, address register and data register. The spread spectrum receiver acquires synchronization of the spread spectrum signal using a microprocessor coupled to the quieting, signal strength or baseband output of the receiver, with a two step algorithm. The steps comprise achieving a coarse lock and a fine lock to the spread spectrum signal.