摘要:
A high speed video cable carries signals according to the High-Definition Multimedia Interface (HDMI) or DisplayPort standards, and includes a raw cable and may include a boost device. The raw cable includes coaxial lines of a characteristic cable impedance higher than the impedance implied in the standards. The correct impedance is observed at the sending end by shunt resistors mounted in the first cable connector. The resultant loss of signal may be made up with the boost device mounted in the connector at the other end of the cable in the case of a long cable.
摘要:
A high speed video cable carries signals according to the High-Definition Multimedia Interface (HDMI), and includes a raw cable and a boost device. Each of four high speed video signals is carried on the inner conductors of a pair of coaxial lines in the raw cable. Lower speed signals are carried on the galvanically or capacitively coupled shields of a pair of coaxial lines.
摘要:
A high speed cable with terminating assemblies at the respective ends of the cable includes a ground wire, one or more signal wires, and a conductive layer enclosing the ground wire and the signal wires. The ground wire as well as the signal wires and the conductive layer extend into the terminating assemblies, in each of which corresponding inductive elements are coupled between the conductive layer and the ground wire. In each terminating assembly, the ground wire is shunted to the conductive layer by inductive elements, thus providing added low frequency connectivity in the cable, while at the same time blocking high frequency noise energy that may be present in the ground wire and preventing it from being coupled into, and transmitted through, the conductive layer.
摘要:
A high speed video cable carries signals according to the High-Definition Multimedia Interface (HDMI) or DisplayPort standards, and includes a raw cable and a boost device. The raw cable includes coaxial lines of a characteristic cable impedance lower than the impedance implied in the standards. The correct impedance is observed at the sending end by series resistors mounted in the first cable connector. The resultant loss of signal is made up with the boost device mounted in the connector at the other end of the cable.
摘要:
A high speed video cable carries signals according to the High-Definition Multimedia Interface (HDMI), and includes a raw cable and may include a boost device. The raw cable includes coaxial lines which are covered by an outer metallic braid. Each of four high speed video signals is carried on the inner conductors of a pair of coaxial lines. Lower speed signals are carried on the galvanically or capacitively coupled shields of a pair of coaxial lines, as well as the braid of the cable, thus permitting fourteen HDMI signals to be carried in a cable comprising only eight coaxial lines, resulting in a simpler and lower cost production and assembly of the cable.
摘要:
A high speed video cable carries signals according to the High-Definition Multimedia Interface (HDMI), and includes a raw cable and may include a boost device. The raw cable includes coaxial lines which are covered by an outer metallic braid. Each of four high speed video signals is carried on the inner conductors of a pair of coaxial lines. Lower speed signals are carried on the galvanically or capacitively coupled shields of a pair of coaxial lines, as well as the braid of the cable.
摘要:
A high speed video cable carries signals according to the High-Definition Multimedia Interface (HDMI) or DisplayPort standards, and includes a raw cable. The raw cable is constructed with either Shielded Twisted Pairs (STP) or coaxial lines which carry all signals on either shielded conductors or their shields. Some auxiliary signals including power are carried on ungrounded shields.
摘要:
A high speed video cable carries signals according to the High-Definition Multimedia Interface (HDMI) or DisplayPort standards, and includes a raw cable and a boost device. The raw cable includes coaxial lines of a characteristic cable impedance lower than the impedance implied in the standards. The correct impedance is observed at the sending end by series resistors mounted in the first cable connector. The resultant loss of signal is made up with the boost device mounted in the connector at the other end of the cable.
摘要:
A high speed video cable carries signals according to the High-Definition Multimedia Interface (HDMI) or DisplayPort standards, and includes a raw cable and a boost device. The raw cable is exclusively constructed with either Shielded Twisted Pairs (STP) or coaxial lines which carry all signals on either shielded wires or their shields. The high speed signals are carried on the shielded wires to the boost device where any common mode noise induced by the signals on the shields is removed. Some auxiliary signals including power are carried on ungrounded shields.
摘要:
A high speed video cable carries signals according to the High-Definition Multimedia Interface (HDMI), and includes a raw cable and a boost device. Each of four high speed video signals is carried on the inner conductors of a pair of coaxial lines in the raw cable. The boost device receives only one of the polarities of one of the high speed video signals, and generates a differential signal therefrom. Lower speed signals are carried on the galvanically or capacitively coupled shields of a pair of coaxial lines.