摘要:
A life safety device includes a smoke sensor and a carbon monoxide (CO) sensor. Smoke sensitivity of the device is adaptively adjusted based upon the smoke sensor signal and the CO sensor signal.
摘要:
A life safety device can include a battery monitoring module configured to measure a voltage level of a battery, an alarm module configured to provide an alarm when the voltage level is less than or equal to a low battery threshold, and a silence module configured to silence the alarm for a random time period.
摘要:
A method of radio frequency communication for a life safety device including a controller, a hazardous condition sensor, an alarm device, and a radio frequency communications device including transmitting and receiving capability. One method includes receiving a test signal using the radio frequency communications device, lowering a voltage to the hazardous condition sensor to simulate a hazardous condition to test the hazardous condition sensor, and emitting an alarm using the alarm device if the hazardous condition sensor passes the test. Another method includes before transmitting a radio frequency signal, turning on the radio frequency communications device for a period of time, and delaying transmission if the radio frequency communications device receives a header, deadtime and startbit. Yet another method includes sending a test signal at a first transmission power level, and sending an alarm signal at a second transmission power level greater than the first transmission power level.
摘要:
Presented is a communications protocol for use by interconnected hazardous condition detectors, such as smoke and carbon monoxide detectors for use in dwellings and other structures. This communications protocol provides conventional signaling to indicate the presence of a smoke condition necessitating the generation of a smoke temporal pattern by all interconnected detectors. The protocol further defines a signaling method by which conventional smoke detectors that are incapable of providing temporal patterns other than that required for a smoke alarm condition will not be sent into an alarm mode of operation upon receipt of a signal other than the conventional smoke alarm signal. This communications protocol defines a pulsed signal to indicate a non-smoke alarm condition that is of a duration that will not trigger the conventional smoke alarms. To allow for the transmission of multiple hazardous conditions alarm notifications, as well as the transmission of additional hazardous condition detector control signals, the communications protocol utilizes a multi-bit signal transmitted via the conventional single signal I/O wire of currently existing interconnect wiring. Through the use of an 8 bit alarm signal, multiple hazardous conditions may be signaled as well as operating modes such as test, hush, reset, low battery, etc. Also presented are smoke, carbon monoxide, and combination hazardous condition detectors that utilize the communications protocol presented herein.
摘要:
A detector assembly is adapted to be removably secured to a female electrical receptacle connected to a power supply where the female receptacle is mounted at a surface of a structure. The detector apparatus includes a housing and an electrically powered circuit mounted in the housing. The circuit includes components operable to detect an alarm condition (such as carbon monoxide or smoke) and to provide an alarm in response to the detection. A primary power source includes a male electrical connector secured to the housing and extending outwardly there from. A secondary power source includes a battery connector mounted within the housing and adapted to removably receive a battery contained within the housing. The circuit is adapted to draw power from the secondary source in the event of a detected loss of power from the primary source. The apparatus includes a sensor for sensing displacement of the housing from the female electrical receptacle. The circuit is adapted to provide an alarm in response to the displacement of the housing from the mounted surface.
摘要:
An apparatus for the detection and enunciation of hazardous conditions within an environment comprises at least two detection circuits positioned to sense ambient conditions within a home or business environment. One of the detection circuits senses the presence of smoke, and the other detection circuit senses the presence of carbon monoxide. The apparatus also comprises an alarm circuit which is responsive to each of the detection circuits for generating at least one alarm pattern, and preferably a separate alarm pattern for each different sensed condition. A voice synthesizer circuit is also included, and is responsive to each of the detection circuits for generating at least one voice message. As with the alarm patterns, the voice synthesizer preferably generates separate voice messages for each separate detected condition. The apparatus advantageously also contains an interleaving control circuit. This interleaving control circuit interleaves the alarm patterns and voice messages in a predetermined sequence to reduce confusion in an emergency situation. A method for the detection and enunciation of multiple hazardous condition within an environment is also presented, and comprises the steps of: (a) sensing ambient conditions within the environment to detect at least two hazardous condition; (b) generating an alarm pattern and a voice message in response to sensing the hazardous conditions; (c) interleaving the alarm pattern and the voice message; and (e) enunciating these interleaved alarm patterns and voice.
摘要:
Presented is a communications protocol for use by interconnected hazardous condition detectors, such as smoke and carbon monoxide detectors for use in dwellings and other structures. This communications protocol provides conventional signaling to indicate the presence of a smoke condition necessitating the generation of a smoke temporal pattern by all interconnected detectors. The protocol further defines a signaling method by which conventional smoke detectors that are incapable of providing temporal patterns other than that required for a smoke alarm condition will not be sent into an alarm mode of operation upon receipt of a signal other than the conventional smoke alarm signal. This communications protocol defines a pulsed signal to indicate a non-smoke alarm condition that is of a duration that will not trigger the conventional smoke alarms. To allow for the transmission of multiple hazardous conditions alarm notifications, as well as the transmission of additional hazardous condition detector control signals, the communications protocol utilizes a multi-bit signal transmitted via the conventional single signal I/O wire of currently existing interconnect wiring. Through the use of an 8 bit alarm signal, multiple hazardous conditions may be signaled as well as operating modes such as test, hush, reset, low battery, etc. Also presented are smoke, carbon monoxide, and combination hazardous condition detectors that utilize the communications protocol presented herein.
摘要:
A microcontroller-based hazardous condition detector having an intelligent hush feature is presented. The microcontroller controls the operational mode of the detector by monitoring a single user-actuated switch, the inputs from a smoke chamber and a carbon monoxide detector circuit, and the current operating mode of the detector. When in a normal or no-alarm mode, actuation of the switch will cause the microcontroller to place the detector in a test mode of operation. If the detector is in a carbon monoxide alarm mode, actuation of the switch will act to reset the accumulator function of the microprocessor for the carbon monoxide alarm sensing. If the detector is in a smoke alarm mode, actuation of the switch may place the detector in a hush mode if the level of smoke is sufficiently low, or will have no effect if the level of smoke is too high. Once in the hush mode, actuation of the switch will place the detector into the smoke alarm mode. The microcontroller will also place the detector in the smoke alarm mode if the level of smoke increases beyond a certain limit, and after the expiration of a hush mode time limit. To coordinate this operation, the sensitivity of the detector is not changed in any mode of operation, and the microcontroller monitors both an alarm and a hush threshold.
摘要:
A life safety device includes a smoke sensor and a carbon monoxide (CO) sensor. Smoke sensitivity of the device is adaptively adjusted based upon the smoke sensor signal and the CO sensor signal.
摘要:
An apparatus for the detection and enunciation of hazardous conditions within an environment comprises at least two detection circuits positioned to sense ambient conditions within a home or business environment. One of the detection circuits senses the presence of smoke, and the other detection circuit senses the presence of carbon monoxide. The apparatus also comprises an alarm circuit which is responsive to each of the detection circuits for generating at least one alarm pattern, and preferably a separate alarm pattern for each different sensed condition. A voice synthesizer circuit is also included, and is responsive to each of the detection circuits for generating at least one voice message. As with the alarm patterns, the voice synthesizer preferably generates separate voice messages for each separate detected condition. The apparatus advantageously also contains an interleaving control circuit. This interleaving control circuit interleaves the alarm patterns and voice messages in a predetermined sequence to reduce confusion in an emergency situation. A method for the detection and enunciation of multiple hazardous condition within an environment is also presented, and comprises the steps of: (a) sensing ambient conditions within the environment to detect at least two hazardous condition; (b) generating an alarm pattern and a voice message in response to sensing the hazardous conditions; (c) interleaving the alarm pattern and the voice message; and (e) enunciating these interleaved alarm patterns and voice.