摘要:
A wireless network communication system and method in which the wireless channel can be determined by selecting a vacant pseudonoise (PN) or spreading code. When communication is started, in order to judge whether a PN code is being employed by another communication group, the degree of correlation between the received signal converted to an intermediate frequency or a base-band frequency by a transceiver and a reference pseudonoise code signal is detected using a correlation circuit within a correlation detector. There is a channel controller which controls the PN code used by the communication terminal which receives an output of the correlation detector which correlates a received channel signal with a reference PN code generated by the PN code generator. If the correlation output signal is not smaller than a threshold value, it is determined that the PN code is to be employed. Furthermore, at the time of transmission, the pseudonoise code generator is controlled so as to supply the selected PN code to a transceiver. The transceiver combines the data to be transmitted with the PN code to be used in order to determine the final signal which is to be transmitted by the terminal.
摘要:
A wireless network communication system and method in which the wireless channel can be determined by selecting a vacant pseudonoise (PN) or spreading code. When communication is started, in order to judge whether a PN code is being employed by another communication group, the degree of correlation between the received signal converted to an intermediate frequency or a base-band frequency by a transceiver and a reference pseudonoise code signal is detected using a correlation circuit within a correlation detector. There is a channel controller which controls the PN code used by the communication terminal which receives an output of the correlation detector which correlates a received channel signal with a reference PN code generated by the PN code generator. If the correlation output signal is not smaller than a threshold value, it is determined that the PN code is to be employed. Furthermore, at the time of transmission, the pseudonoise code generator is controlled so as to supply the selected PN code to a transceiver. The transceiver combines the data to be transmitted with the PN code to be used in order to determine the final signal which is to be transmitted by the terminal.
摘要:
A wireless computer network communication system for use in an environment in which plural groups can perform network communication at the same time. A channel controller receives a requirement of starting network communication from a computer, controls a wireless channel sensor, and detects a received signal. The wireless channel detector detects which wireless channel is employed by one or more other networks and the channel controller determines the wireless channel to be employed by its own group and also controls the transceiver. The computer starts the network communication through a network controller. The network controller controls the transceiver for transmitting and receiving data by use of the wireless channel, and the same further controls the transmitting/receiving of the requirements and the data from the computer.
摘要:
A clock rate modulation spread spectrum (CRM-SS) communication system is provided in which a bit error rate on a receiver side is minimized by controlling at least one of parameters defining a phase error. The CRM-SS communication system uses a delay locked loop comprising an n.DELTA.-type delay locked loop, where 0