摘要:
A motorized still camera has a housing which can receive film cassettes in a film chamber at the rear side of the housing. A motor-drive of the camera includes a motor which is located forwardly of the cassette take-up section, in direction towards the front side of the camera. A motor-controlling mechanism and a film transporting mechanism of the motor drive are so dimensioned as to require relatively little space in direction vertically of the camera and in direction between the front and rear side, but instead to have their major dimensions extending lengthwise of the housing so as to make optimum use of the space available in the housing.
摘要:
When the user presses the trigger button, a rod is pulled longitudinally by a drive spring in a first direction from a first to a second position triggering the shutter in the process and a coupling thereafter couples the rod to a transport motor which returns the rod in the opposite second direction back to first position, the rod resetting the shutter in the process, the rod when returned to second position becoming decoupled from the motor so that the latter will not oppose the force of the drive spring for the next first-direction movement of the rod. The crank rod is blocked against first-direction movement by two blocking levers, the first initially being in blocking position and the second initially in unblocking position. When the user presses the trigger button, the first blocking lever unblocks the rod and the latter performs its first-direction movement, the first lever remaining in unblocking position until the user releases the trigger button, and near the end of the second-direction movement of the rod the second blocking lever snaps into blocking position, to prevent an unintentional second exposure, the second blocking lever blocking the rod until the first lever, upon release of the trigger button, can return to blocking position, whereupon the second lever once more assumes unblocking position. When instead of single exposures exposure sequences are to be made, the user sets a manual switch which arrests the second lever in unblocking position, so that the rod performs its first- and second-direction movements alternately for as long as the user keeps the trigger button depressed.
摘要:
When the trigger button is depressed, a crank rod is pulled by a biasing spring in a first direction from a first to a second position triggering the shutter in the process, and an associated crankwheel drives a gear segment coupled thereto to an angular position engaging a motor-driven transmission, which latter then drives the gear segment, crankwheel and thereby the crank rod in an opposite second direction back to first position, the crank rod resetting the shutter in the process, whereupon the gear segment reaches an angular position once more disengaged from the film-transport motor. A switch-control lever coupled to a perforation feeler keeps a motor-energize switch closed until the feeler enters a film perforation, but a switch-control lever redundantly keeps the motor-energize switch closed under the camming action of the crank rod, whereby if film is present in the camera motor energization terminates when the feeler enters a perforation, whereas if film is not present then, for demonstration purposes, the same operations are performed, but with motor energization terminating in dependence upon crank rod position.
摘要:
A photographic still or motion-picture camera has a viewfinder and a manually moved focus adjuster, such as a focussing ring. When the user peers into the viewfinder, there is a visible indication of the direction in which the focus adjuster should be manually moved to reduce the state-of-focus error, for example two curved illuminated errors, one pointing clockwise and the other counterclockwise, only one of which lights up to indicate the direction in which the focussing ring should be manually turned. When the state-of-focus error has been reduced to zero or a minimum, this is likewise indicated, for example because neither curved arrow is illuminated. To control the activation of the indicating elements, use can be made of components of a conventional completely automatic focussing system, but minus the adjusting motor of such system and minus superfluous motor-energization control circuitry. In this way, the user is provided a simple and unequivocal guide when manually focussing, without the cost, complexity, bulkiness and power consumption of a complete automatic focussing system including an adjusting motor and motor-energization control circuitry.
摘要:
A camera includes a viewfinder, an objective and a manually operated focus adjuster. An optical system located in the path of incoming image light splits the incoming image light beam into two component beams projected into respective first and second focal planes. First and second planar arrays of photosensitive elements are located in respective first and second photodetector planes. When the objective is correctly focussed and then defocussed in a first direction, the sharpness of the image on the first array increases and that on the other decreases; if the objective is defocussed in the opposite direction, the opposite occurs. A comparator has two outputs, connected to the elements of the first and second arrays via respective first and second circuit branches. Each circuit branch includes at least one subtractor producing an absolute-value output signal independent of the polarity of the difference between the input signals applied thereto. The subtractor inputs are connected to the outputs of respective elements of the respective one of the two arrays. The comparator output signal controls an indication, visible in the camera viewfinder, informing the user of the direction in which he should manually move the focus adjuster to improve the state of focus.
摘要:
The user of a motion-picture camera selects between motion-picture and single-exposure operation, and presses a release member to initiate shooting, letting go of it to terminate motion-picture shooting. Each time the user lets go of the release member, an internal device provides an interrupt-transport marking alongside the just exposed film frame, or phase shifted relative thereto. Alternatively, the interrupt-transport marking is provided the next time the user presses the release member. In this way, the terminal frame of each motion-picture scene, and each and every one of the interspersed single-exposure shots, is provided with an interrupt-transport frame marking. Thus, if the film is run through a reproducing apparatus provided with a marking detector, detection of each interrupt-transport marking during motion-picture reproduction causes the terminal frame of each motion-picture scene, and also each one of the still shots, to be persistently reproduced as a still image. The interrupt-transport markings could alternatively be provided by such a device in a reproducing apparatus.
摘要:
A camera body has mounted on it a lens mount which is pivotable relative to the camera between an operative and an inoperative position. A mechanism in the camera is activated and transports film from the camera film chamber through the camera during movement of the lens mount from one to the other (or from the other to the one) of the aforementioned positions.
摘要:
A sheet of exposed and developed instant-camera film is discharged from an instant camera and then inserted by the user into a film-holding structure on the back of the camera which very accurately positions the film sheet, such that upon removal and reinsertion of the film sheet into the holding structure the film sheet will always assume a predetermined position. The camera is provided with a multihead magnetic head unit mounted for reciprocating motion along a magnetic strip or coating provided at a marginal portion of the inserted film sheet. During first-direction travel of the head unit, one head records, and during second-direction travel of the head unit a different and differently located head records onto a further segment of the magnetic strip. After recording, the recorded information, e.g., spoken words identifying the subject just photographed, can be reproduced, and if desired erased.
摘要:
A photographic camera has an exposure objective and a focus adjuster device for changing the subject-distance setting of the exposure objective, as well as a transducer generating actual-setting signals dependent upon the setting of the focus adjuster device. An evaluating circuit, operative for ascertaining camera-to-subject distance on one basis or another, produces digital required-setting signals, expressed using a first encoding scheme, whereas the actual-setting signals generated by the aforementioned transducer are expressed using a different, second encoding scheme. The actual-setting signals are applied to the first input of a comparator stage, whose second input receives a transformed version of the required-setting signals, transformed from the first to the second encoding scheme, i.e., so that the comparator can compare, in a direct and simple way, the actual-setting signals and required-setting signals against each other with both signals expressed in accordance with one and the same encoding scheme. The output signals produced by the comparator control indicator which informs the user of the direction in which the manual focus adjuster of the camera should be moved to improve the camera's state of focus, and/or control the energization of an electric motor or other electromagnetic positioning device operative for controlling the setting of the focus adjusting device.
摘要:
The reproducing apparatus, such as a motion-picture film projector, stops recording medium transport in response to interrupt-transport frame markings on the recording medium and reproduces the thusly marked image frames as still images. Interrupt-transport frame markings are provided at the terminal frame of each motion-picture scene on the recording medium, or at each still-shot image frame on the recording medium, or both. The user of the reproducing apparatus can select automatic reproduction of motion-picture scenes interspersed with automatic still reproduction of still shots, and can additionally select automatic still reproduction of the terminal frame of each motion-picture scene.