摘要:
After a maximum noise rise for a cell is set, a maximum noise rise for each mobile station is allocated within the cell. The actual noise rise from each mobile station within the cell is measured at a base station and signaled to a network. When the cell uses enhanced dedicated channel (E-DCH), the contribution to noise rise of E-DCH signaling is determined and received signal code power (RSCP) at the base station is measured. The RSCP measurement is decoded to determine contributions from mobile stations within and outside the cell; contributions from mobile stations within the cell are calculated; and the network is notified of the measured noise rise. In addition a compensation value may be applied to compensate for temperature induced noise.
摘要:
After a maximum noise rise for a cell is set, a maximum noise rise for each mobile station is allocated within the cell. The actual noise rise from each mobile station within the cell is measured at a base station and signaled to a network. When the cell uses enhanced dedicated channel (E-DCH), the contribution to noise rise of E-DCH signaling is determined and received signal code power (RSCP) at the base station is measured. The RSCP measurement is decoded to determine contributions from mobile stations within and outside the cell; contributions from mobile stations within the cell are calculated; and the network is notified of the measured noise rise. In addition a compensation value may be applied to compensate for temperature induced noise.
摘要:
A method performs measurements by a mobile station of a radio communication system. According to said method, the mobile station receives data via a first channel. Said mobile station temporarily interrupts the reception of the data, in order to perform measurements on at least one second channel. The interruption of the reception takes place according to a correctability of errors occurring during the data transmission via the first channel.
摘要:
In a method for communication by radio a first network radio station allocates radio resources to a subscriber station and communicates with the subscriber station using a portion of the radio resources. A second network radio station uses another portion of the radio resources to send a signaling signal which is intended exclusively for the subscriber station. The first network radio station and/or the second network radio station receives a message from the subscriber station, acknowledging receipt of the signaling signal. In response to the message from the subscriber station, the communication of the subscriber station is handed over from the first network radio station to the second network radio station.
摘要:
In a method for communication by radio a first network radio station allocates radio resources to a subscriber station and communicates with the subscriber station using a portion of the radio resources. A second network radio station uses another portion of the radio resources to send a signaling signal which is intended exclusively for the subscriber station. The first network radio station and/or the second network radio station receives a message from the subscriber station, acknowledging receipt of the signaling signal. In response to the message from the subscriber station, the communication of the subscriber station is handed over from the first network radio station to the second network radio station.
摘要:
Codes are assigned and scheduled for data transmissions, between a radio station and at least one subscriber station, over a wireless interface of a radio communication system, in such a way that both for transmissions in the upward direction (uplink), from subscriber stations to the radio station, and also for transmissions in the downward direction (downlink), from the radio station to subscriber stations, the lowest possible signal-to-average ratio can be achieved.
摘要:
Codes are assigned and scheduled for data transmissions, between a radio station and at least one subscriber station, over a wireless interface of a radio communication system, in such a way that both for transmissions in the upward direction (uplink), from subscriber stations to the radio station, and also for transmissions in the downward direction (downlink), from the radio station to subscriber stations, the lowest possible signal-to-average ratio can be achieved.
摘要:
A method controls a radio cell monitoring system. A standardized radio cell list is transmitted by a device on the network side, the device being allocated to a radio cell of interest. The radio cell list lists radio cells that are adjacent to the radio cell of interest, receiving radio communication terminals monitoring, using the radio cellist, the signals of the adjacent radio cells for a handover or a cell reselection by way of measurement. The respective measurements of the radio communication terminals are transmitted to the device on the network end. At least one priority on the network side is allocated to each radio cell of the radio cell list. Additionally, at least one indication on the network side, indicating which services are offered within the respective radio cell for execution, is allocated to every radio cell of the radio cell list. A receiving radio communication terminal monitors, depending on the signaled priority and depending on the signaled service indication, only a limited number of the radio cells listed in the radio cell list by measurement in order to carry out a service.