摘要:
The description concerns a voltage regulator (12) for regulating the output voltage (UB+) of an alternator (10) which is driven by an internal combustion engine. The voltage regulator (12) has an additional circuit (24) which evaluates the exciter current duty cycle (T) and supplies a signal (S1) at its output which is high when the exciter current duty cycle is high and low when the exciter current duty cycle is low. The circuit (24) is integrated in the voltage regulator (12) and the output signal (S1) supplied by it is transmitted via an additional regulator terminal (DA) and can be fed to the control device (25) of the internal combustion engine, where it is used, for instance, to increase the idling speed of the engine and accordingly also to increase the alternator speed and thus the power delivered by the alternator (10). It is also possible to switch off unnecessary consumers with this signal.
摘要:
A generator having an exciting winding and a standard load associated with a standard exciting current in the exciting winding can be controlled by a voltage regulator which adjusts an exciting current in the exciting winding and a temperature measurement device in a predetermined location in the generator and/or a voltage regulator associated with the generator, which is connected to the voltage regulator, advantageously via a microprocessor device or a pulse duration modulation circuit connected to the final regulating stage of the voltage regulator for gating the exciting current. So that the generator can be dimensioned to operate above its maximum rated temperature and can be operated in a superexcited state, the method of controlling the generator includes the steps of increasing the exciting current in the exciting winding beyond the standard exciting current to operate the generator at a higher load than the standard load; measuring a temperature T.sub.G at a predetermined location, advantageously in the generator, with the temperature measurement device; determining an allowed limiting temperature T.sub.GMAX at the predetermined location; lowering the exciting current, I.sub.Err, when the temperature T.sub.G is greater than the allowed limiting temperature T.sub.GMAX and maintaining the output power as high as possible without exceeding the allowed limiting temperature.
摘要:
In a device and a method for regulating an alternator increased alternator output is achieved either in that the exciter current can have a value above the nominal exciter current or in that the alternator control parameters are fixed in such a way that overheating could occur under unfavorable circumstances. In order to prevent this overheating even under unfavorable circumstances, the temperature is measured preferably in the regulator and the temperature at critical locations is determined from this temperature while taking into account typical parameters. This can be effected in that the temperature or temperatures which would occur in stationary operation are first determined. When an impermissible temperature is detected, the exciter current is reduced by suitable steps until the allowable maximum temperature is not exceeded.
摘要:
The apparatus for controlling an output voltage of a generator of an internal combustion engine having a starter device, includes a charge control signaling device, an excitation coil for the generator and a voltage regulator controlling an excitation current in the excitation coil and an excitation current limiting device for limiting the excitation current during a predetermined starting phase (.DELTA.t1 ) connected to the voltage regulator. The excitation current limiting device detects whether the engine is in a starting phase. If the engine is in a starting phase, the excitation current limiting device reduces the excitation current so that a voltage is produce at generator terminal D+ which permits no load current and simultaneously guarantees that the charge control signalling device is shut off. After ending of the starting phase the excitation current limiting device is shut off and the excitation current is increased to its standard value, which results in a generator output voltage which is above the power supply voltage that charges the battery.
摘要:
In a voltage regulator for an alternator which charges a battery via a charging cable and supplies a vehicle mains with voltage, the output voltage is regulated as a function of the temperature of the battery. The voltage regulator has a power part and a control part, which includes a simulation device for storing data and for determining the temperature of the battery, and hence the optimum charging voltage, by simulation from the stored data. Further, the voltage drop between the alternator and battery can be calculated from the alternator current and the resistance of the charging cable while taking into account correction factors which take into account the different connections of the consuming devices between the alternator and the battery so that the calculated voltage drop and the optimum charging voltage for the battery can be used by the voltage regulator to set the voltage delivered to the battery.
摘要:
Fresh air from an area located outside of the engine compartment is supplied to an alternator in a motor vehicle by ventilator. The ventilator is supplied with voltage from the alternator power supply system, and since a failure of the ventilator could lead to destruction of the alternator due to heat, the functioning of the ventilator is monitored by a device or circuit for monitoring and/or controlling the ventilator. This circuit also has a device for self-checking and controls the additional ventilator as a function of the alternator temperature by a device for measuring alternator temperature electrically connected to it.
摘要:
In a circuit arrangement for measuring a starting of rotation of a generator having an exciting winding and three-phase windings, a voltage regulator regulates an output voltage of the generator by influencing an exciting current, the three-phase windings are connected to one another at a point, one of the phase windings is connected to ground via a first resistor, another of the phase windings is connected to ground via a second resistor, a voltage across the first resistor is evaluated as a rotational-speed-dependent alternating voltage, this voltage is compared with a threshold voltage, and the starting of the rotation of the generator is detected when the measured voltage exceeds the threshold voltage.
摘要:
A device for supplying voltage to at least one consuming device in a motor vehicle including two parallel generators, two voltage regulators associated with each of the generators, two batteries each connected with one of the voltage regulators, a starter switch connected with at least one of the batteries and the voltage regulators, a charge control lamp for signalling connected with the starter switch and the voltage regulators, switching device for electrically connecting and disconnecting the consuming device or devices, and devices for controlling the voltage regulators so that during starting the charge control lamp indicates starting and the switching device disconnects the consuming devices and if a defect occurs in either generator-voltage regulator system, the charge control light lights and the consuming device or devices is (or are) supplied with current, even if, for example, one of the generators fails. The device for supplying voltage advantageously includes a switch device having four diodes, the anodes of two diodes (D1,D2) being connected with each other and the charge control lamp and the cathodes of the two diodes (D1,D2) being each connected to a different voltage regulator, and the cathodes of the other two diodes (D3,D4) being connected with each other and the switching device (13).
摘要:
The battery charging apparatus includes a generator, main voltage regulator, an auxiliary voltage regulator, at least one consuming device and a protective circuit having circuit portions for recognizing and signalling faults via a charge control lamp. The generator output voltage is rectified with rectifier bridges containing Zener diodes. Voltage comparison to threshold values and logic circuitry for processing the comparison results are used to determine the presence of faults in the operation of the battery charging apparatus. The fault detection device detects conduction defects in the main voltage regulator and/or interruption in the generator excitation circuit. The logic circuitry determines whether simultaneously both a supplied voltage exceeds a threshold value and the main voltage regulator is turned on longer than a predetermined time interval to indicate its continuous operation. After a fault is detected voltage regulation is performed by the auxiliary voltage regulator until the fault is eliminated so that the rectifier bridges are not destroyed. The battery charging apparatus described is particularly suitable for use in motor vehicles.
摘要:
The method of regulating a voltage produced by a generator with a voltage regulator according to a battery charge state includes providing a controller containing a clock and a memory able to store battery and power supply reference data, battery voltage and generator rotation speed; maintaining a regulated voltage produced by the generator at a normal value (U.sub.R) during a first time interval (t1); measuring a battery voltage (U.sub.B) and decreasing the regulated voltage (U.sub.R) during a second time interval (t2); determining the battery charge state from the measured battery voltage (U.sub.B) according to the stored battery- and power supply-reference data; and, when the battery charge state is determined to be unsatisfactory, determining an additional time interval (t4) with the controller and an amount of increase of the regulated voltage (U.sub.R) sufficient to obtain a satisfactory battery charge state during the additional time interval (t4) without damaging the voltage sensitive components of the voltage regulator; and increasing the regulated voltage above the normal value (U.sub.R) by the thus determined amount and turning on no voltage-critical consuming device during the additional time interval (t4). A voltage regulator including the controller is also described.