摘要:
A transmission method based on a Hybrid Automatic Repeat Request (HARQ) scheme for in a communication system. A codeword is generated using a Low Density Parity Check (LDPC) code. Parity bits of the codeword are classified on a basis of a transmission priority. Parity bits with an identical transmission priority are grouped. An information bit group of the codeword and parity bit groups with the identical transmission priority are shuffled in a predefined pattern. A packet is generated from the shuffled information bit group and the shuffled parity bit groups based on the transmission priority. The generated packet is retransmitted in response to a retransmission request. The transmission method can obtain the effect of channel interleaving by setting a transmission priority according to importance of puncturing target blocks, shuffling blocks with the same priority, and shuffling and transmitting bits configuring each block.
摘要:
Disclosed is a method for transmitting an uplink data during handoff A method for transmitting uplink data in a soft handoff system, in which a mobile station is simultaneously connected with at least two base transceiver systems under a control of a base station controller, includes selecting one of the base transceiver systems as a main base transceiver system, transmitting uplink signals to the main base transceiver system and sub-base transceiver systems, and transmitting by the sub-base transceiver systems received uplink signals to the main base transceiver system. Through the method, a main BTS for diversity combining and decoding soft bit strings is established among BTSs connected to a mobile station, so that it is possible to distribute a data processing amount centralized on a BSC to a BTS.
摘要:
A method for transmitting and receiving data in a communication system. The method generates a frame for mapping each of multiple communication service modes of a base station providing the multiple communication service modes to a user terminal, in units of subframes each having a time interval and a frequency band. The method includes estimating a communication service mode supporting an optimal service among the multiple communication service modes provided by the base station supporting the multiple communication service modes, and sending to the base station a random access message for access to the base station over a shared channel.
摘要:
Provided is a method for puncturing a Low Density Parity Check (LDPC) code that is expressed in a factor graph configured by a bit node and a check node connected to an edge and is decoded by a parity check matrix with an information region and a parity region. A mother code with a code rate is generated. Bit nodes configuring the parity region are grouped in a block unit. A transmission code rate and the number of bits to be punctured in the mother code according to the transmission code rate are set. A puncturing process in either the block unit or a bit unit or both is performed according to the transmission code rate. All codes with required code rates can be obtained. The LDPC code puncturing method can be flexibly applied to Hybrid Automatic Repeat Request (H-ARQ) and Incremental Redundancy (IR) systems.
摘要:
Provided is a two-dimensional equalization method in a receiver of a communication system using an Orthogonal Frequency Division Multiple Access (OFDMA) scheme. The receiver sets as a first value a value of a 1-tap frequency domain equalizer (FEQ) corresponding to a sub-channel allocated to the receiver , and sets as a second value a value of a 1-tap FEQ corresponding to sub-channels other than the allocated sub-channel. Upon receipt of a signal, the receiver performs Fast Fourier Transform (FFT) on the received signal, and equalizes the FFT-processed signal according to the values of the 1-tap FEQs.
摘要:
A terminal and a communication method thereof, a base station controller and a control method thereof, and a wireless communication system and a method thereof are provided. The wireless communication system includes a terminal, a controller, and at least one base station. The terminal (200) has an array antenna and searches for neighbor base stations (100). The controller (300) determines an active set for multi-cooperative transmission/reception with respect to the terminal among searched neighbor base stations, and schedules beam transmission of each base station included in the determined active set. The at least one base station performs transmission/reception with the terminal using beam-forming in an ultra high frequency band, and provides resource information regarding uplink/downlink of each base station included in the active set to the terminal based on the scheduling by the controller.
摘要:
A method and apparatus for adaptively selecting a Peer-to-Peer (P2P) communication mode in a wireless communication system are provided. In a method of operating a Base Station (BS) for establishing a P2P connection between Mobile Stations (MSs) in the wireless communication system, the method includes, upon receiving a connection request message from a transmitting MS, broadcasting an instruction message to one or more neighbor MSs, receiving P2P-related information from a receiving MS among the neighbor MSs, selecting a communication mode by determining whether P2P communication is possible between MSs according to the P2P-related information and, if P2P communication is possible between the MSs, transmitting a connection response message to the transmitting MS and the receiving MS.