摘要:
Methods and apparatuses are provided for causing active hand-in of a device from a macrocell base station to a femto node, which can be an inter-frequency hand-in. The femto node can broadcast a beacon over an operating frequency of the macrocell base station, and the macrocell base station, and/or one or more network components, can identify the femto node based on one or more parameters reported by the device from receiving the beacon. The beacon can be transmitted at varying powers to ensure active hand-in triggering, mitigate interference and/or can be powered on and off for such purposes. In addition, a macrocell base station can regulate compressed mode periods during which a device can measure the femto node based on receiving information regarding device proximity to the femto node, or a device can generate proximity indication messages base on measuring the beacon signals, etc.
摘要:
A cell reselection parameter is transmitted on one carrier frequency for a defined period of time to cause access terminals operating on that carrier frequency to more aggressively search for access points on at least one other carrier frequency. For example, a femto cell operating on one carrier frequency may transmit a broadcast channel including a cell reselection parameter such as Sintersearch on another carrier frequency that is used by a macro cell. Here, the value of the cell reselection parameter (e.g., Sintersearch) is chosen so that the access terminals will more aggressively conduct inter-frequency searches. In addition, the cell reselection parameter is transmitted for a period of time that ensures that a nearby access terminal will receive the parameter during its wakeup interval.
摘要:
An access point generates beacons at different power levels at different times to provide an acceptable tradeoff between coverage area associated with the beacons and outage experienced at nearby access terminals. For example, a femto access point may transmit beacons at a relatively low power for a relatively long period of time to reduce interference at nearby access terminals that are being served by a macro access point. The femto access point may then transmit beacons at a relatively high power for a relatively short period of time to enable nearby access terminals to receive the beacons. Also, a given transmit chain may be used to provide frequency hopping of high and low power beacons.
摘要:
Interference that occurs during wireless communication may be managed by determination and application of an adaptive path loss adjustment. A method, apparatus and medium of communication determine a level of excess received interference based at least in part on out-of-cell interference (Ioc). The path loss is adjusted by an additional path loss on an uplink signal when the level of excess received interference exceeds an interference target that would cause a Rise-over-Thermal (RoT) metric to exceed stable communication.
摘要:
In a handover operation an access terminal is handed over from a source access point to a target access point. To facilitate efficient identification of a target access point, a handover operation may be initiated by the target access point. A candidate frequency search also may be invoked to confirm that an access terminal identified by a target access point for a handover is in the vicinity of the target access point. A source access point may verify whether an access terminal is in a vicinity of a target access point to determine whether to perform a handover operation. A source access point may handle potential ambiguity between several target access points by sending handover commands to each of these target access points. An access terminal also may assist in the determination of whether to perform a handover operation.
摘要:
Interference that occurs during wireless communication may be managed through the use of fractional reuse and other techniques. In some aspects fractional reuse may relate to HARQ interlaces, portions of a timeslot, frequency spectrum, and spreading codes. Interference may be managed through the use of a transmit power profile and/or an attenuation profile. Interference also may be managed through the use of power management-related techniques.
摘要:
Interference that occurs during wireless communication may be managed through the use of fractional reuse and other techniques. In some aspects fractional reuse may relate to HARQ interlaces, portions of a timeslot, frequency spectrum, and spreading codes. Interference may be managed through the use of a transmit power profile and/or an attenuation profile. Interference also may be managed through the use of power management-related techniques.
摘要:
In some aspect restricted access nodes are assigned to a designated common channel while access terminals that are in active communication with a macro access node may selectively be assigned to the designated channel. In some aspect an access terminal associated with macro access node may perform a handoff to a different carrier when the access terminal is in the vicinity of a coverage area of a restricted access node. In some aspect an access terminal associated with a macro access node may perform a handoff to a different carrier based on location information. In some aspect access to a restricted access node is controlled based on policy and/or based on operation of an access terminal associated with the restricted access node.
摘要:
Transmit power (e.g., maximum transmit power) may be defined based on the maximum received signal strength allowed by a receiver and a minimum coupling loss from a transmitting node to a receiver. Transmit power may be defined for an access node (e.g., a femto node) such that a corresponding outage created in a cell (e.g., a macro cell) is limited while still providing an acceptable level of coverage for access terminals associated with the access node. An access node may autonomously adjust its transmit power based on channel measurement and a defined coverage hole to mitigate interference. Transmit power may be defined based on channel quality. Transmit power may be defined based on a signal-to-noise ratio at an access terminal. The transmit power of neighboring access nodes also may be controlled by inter-access node signaling.
摘要:
Methods and apparatus for reverse link acknowledgement in a wireless local area network. A method includes receiving, at a first node, a data communication over a common channel, the data communication being decodable by other nodes. The method also includes determining transmission resources from the data communication, wherein the transmission resources are different for each node, and transmitting a response over the common channel using the determined transmission resources. An apparatus includes a transmitter configured to transmit to a plurality of nodes a data communication over the common channel, and a receiver configured to receive responses from the plurality of nodes, wherein each response was sent using different transmission resources determined from the data communication.