摘要:
A toner is provided which is superior in the long-term storage stability and has high low-temperature fixing properties. In a DSC curve as measured with a differential scanning calorimeter, the toner has a glass transition temperature of not less than 50° C. and not more than 60° C.; and the toner has, in regard to a resin composition contained therein, a difference of not less than 0.060 W/g in heat flow between a point on the curve at a temperature of 40° C. and a baseline in the range exceeding the glass transition temperature; and in viscoelastic characteristics measured at a frequency of 6.28 rad/sec, the toner has a storage elastic modulus (G′40) at a temperature of 40° C. of not less than 7.0×108 Pa and not more than 2.0×109 Pa, and a storage elastic modulus (G′70) at a temperature of 70° C. of not less than 1.0×105 Pa and not more than 1.0×107 Pa.
摘要翻译:提供了一种调色剂,其长期保存稳定性优异且具有高的低温定影性。 在用差示扫描量热计测量的DSC曲线中,调色剂的玻璃化转变温度不低于50℃且不超过60℃。 并且对于其中所含的树脂组合物,调色剂在温度为40℃的曲线上的点与在超过玻璃的范围内的基线之间的热流中的热流不同为0.060W / g 转变温度; 并且以6.28rad / sec的频率测量的粘弹特性中,调色剂在40℃的温度下的储能弹性模量(G'40)不小于7.0×10 8 Pa且不大于2.0×10 9 Pa ,并且在70℃的温度下的储能弹性模量(G'70)不小于1.0×10 5 Pa且不大于1.0×10 7 Pa。
摘要:
Provided is a magnetic toner capable of providing a stable image by suppressing sleeve contamination even under a high-temperature and high-humidity environment and under a normal-temperature and low-humidity environment and further suppressing large-particle fogging caused after the toner is left alone for a week. The magnetic toner contains toner particles, each of which contains a binder resin and a magnetic iron oxide particle, in which the binder resin has a polyester unit, the toner has i) a dielectric loss factor at 40° C. and 100 kHz of 0.50 pF/m or more but 0.90 pF/m or less, and ii) a true specific gravity of 1.50 g/cm3 or more but 1.85 g/cm3 or less.
摘要翻译:提供一种即使在高温高湿环境下也能在常温低湿环境下即使通过抑制套筒污染来提供稳定图像的磁性调色剂,并且进一步抑制了在调色剂剩余之后引起的大颗粒起雾 独自一个星期。 磁性调色剂含有调色剂颗粒,每个调色剂颗粒含有粘合剂树脂和磁性氧化铁颗粒,其中粘合剂树脂具有聚酯单元,调色剂具有i)在40℃和100kHz的介电损耗系数为0.50 pF / m以上,0.90pF / m以下,ii)真比重为1.50g / cm 3以上,1.85g / cm 3以下。
摘要:
Provide is a toner including toner particles each containing at least a binder resin and a colorant, and an inorganic fine powder, in which the inorganic fine powder has a ratio (A/B) of a total pore volume A measured in a pore diameter range of from 1.9 nm or more and to 8.0 nm or less to a total pore volume B measured in a pore diameter range of from 1.9 nm or more and to 300.0 nm or less of from 0.20 or more and to 1.00 or less, and the total pore volume A is from 1.00×10−2 cm3/g or more and to 1.00 cm3/g or less.
摘要:
To provide a toner which allows low temperature fixation irrespective of the configuration of a fuser, which is excellent in offset resistance, and which provides high image quality at high and low humidities in a stable manner without causing any image defect over time. A toner containing: a binder resin and a colorant; in which the toner contains a THF-soluble component to be dissolved in tetrahydrofuran (THF); the binder resin component contained in the THF-soluble component contains: a vinyl resin unit (I) formed by at least a carboxyl group-containing vinyl resin and an epoxy group-containing vinyl resin and having an epoxy value of 0.001 to 1.000 eq/kg and a polyester unit (II) formed by condensation polymerization of monomers each containing fatty acid having 4 to 12 carbon atoms, aromatic tricarboxylic acid, and ethylene glycol; and the toner has a main peak present in a molecular weight region ranging from 3,000 to 30,000 on the measurement of a molecular weight distribution of the THF-soluble component by gel permeation chromatography (GPC).
摘要:
A toner is provided which can stably provide a favorable density stability, line reproducibility and dot reproducibility even in high-speed copying machines, printers and the like which form high resolution latent images over a long period regardless of environmental conditions, and can provide the image quality adaptable to embedded pattern printing, QR code printing and the like. The present invention is characterized in that the toner which includes toner particles including at least a binder resin and a colorant, and a fine silica powder, has a volume median diameter (D50) of not less than 0.70 μm and not more than 3.00 μm, and a total pore volume of not more than 0.200 cm3/g, measured in the range of the pore diameter from not less than 1.7 nm and not more than 300.0 nm.
摘要:
To provide a toner which allows low temperature fixation irrespective of the configuration of a fuser, which is excellent in offset resistance, and which provides high image quality at high and low humidities in a stable manner without causing any image defect over time. A toner containing: a binder resin and a colorant; in which the toner contains a THF-soluble component to be dissolved in tetrahydrofuran (THF); the binder resin component contained in the THF-soluble component contains: a vinyl resin unit (I) formed by at least a carboxyl group-containing vinyl resin and an epoxy group-containing vinyl resin and having an epoxy value of 0.001 to 1.000 eq/kg and a polyester unit (II) formed by condensation polymerization of monomers each containing fatty acid having 4 to 12 carbon atoms, aromatic tricarboxylic acid, and ethylene glycol; and the toner has a main peak present in a molecular weight region ranging from 3,000 to 30,000 on the measurement of a molecular weight distribution of the THF-soluble component by gel permeation chromatography (GPC).
摘要:
A toner contains at least a bonding resin and a coloring agent, and has a weight mean particle size from 5 &mgr;m to 12 &mgr;m; not less than 90% by number of particles not less than 3 &mgr;m have a circularity “a” not less than 0.900; a cut ratio Z and a weight mean size X of the toner are related as: cut ratio Z≦5.3×X; and a relationship of particles Y having a circularity of not less than 0.950 and a weight mean size X is Y≧e5.51×X−0.645 where X is 5 to 12 &mgr;m.
摘要翻译:调色剂至少含有粘合树脂和着色剂,其重均粒径为5〜12μm; 不少于90%的不小于3μm的颗粒具有不小于0.900的圆形度“a”。 调色剂的切割比Z和重量平均尺寸X相关:切割比Z <= 5.3×X; 并且具有不小于0.950的圆形度和重量平均尺寸X的颗粒Y的关系为Y> = e <5.51> xX <-0.645>其中X为5至12μm。
摘要:
A toner manufacturing method includes grinding and classification to produce a toner containing a binder resin and a colorant with a weight mean particle size of 5 microns to 12 microns and sharp particle density distribution. The toner has a specific circularity, relationship between cut ratio and weight mean size, and relationship between circularity and weight mean size as disclosed in the specification.
摘要:
A toner has toner particles containing at least a binder resin, a colorant and a sulfur-containing compound selected from the group consisting of a sulfur-containing polymer and a sulfur-containing copolymer. The toner has a weight-average particle diameter of from 5 &mgr;m to 12 &mgr;m, and the toner has, in its particles of 3 &mgr;m or larger in diameter, at least 90% by number of particles with a circularity of 0.900 or higher, and has a specific relationship between the cut rate Z and the toner weight-average particle diameter X and a specific relationship between the number-based cumulative value Y of particles with a circularity of 0.950 or higher and the toner weight-average particle diameter X. Also disclosed are an image-forming method and a process cartridge which make use of the toner.
摘要:
A toner comprising toner particles, each of which contains a binder resin and a colorant, wherein the binder resin includes a resin having an endothermic peak at a temperature of 55° C. to 120° C. in a DSC curve; the toner has a softening point Tm of 90° C. to 140° C.; in the viscoelastic characteristic of the toner measured at a frequency of 6.28 rad/sec, the storage elastic modulus at a temperature of 180° C. is 1.0×102 Pa to 1.0×104 Pa; in a chart with the temperature on the x-axis and tan δ on the y-axis, tan δ has a peak having a peak top in the range of 50° C. to 70° C.; tan δ (P) at the peak top temperature is 2.0 to 10.0; the ratio of the tan δ (P) at the peak top temperature to tan δ (Tm) at a temperature of Tm (tan δ (P)/tan δ (Tm)) is in the range of 2.5 to 8.0.