摘要:
A toner comprising toner particles, each of which contains a binder resin and a colorant, wherein the binder resin includes a resin having an endothermic peak at a temperature of 55° C. to 120° C. in a DSC curve; the toner has a softening point Tm of 90° C. to 140° C.; in the viscoelastic characteristic of the toner measured at a frequency of 6.28 rad/sec, the storage elastic modulus at a temperature of 180° C. is 1.0×102 Pa to 1.0×104 Pa; in a chart with the temperature on the x-axis and tan δ on the y-axis, tan δ has a peak having a peak top in the range of 50° C. to 70° C.; tan δ (P) at the peak top temperature is 2.0 to 10.0; the ratio of the tan δ (P) at the peak top temperature to tan δ (Tm) at a temperature of Tm (tan δ (P)/tan δ (Tm)) is in the range of 2.5 to 8.0.
摘要:
An image-forming method includes forming an electrostatic image on an electrostatic image bearing member which has been charged; developing the electrostatic image to form a toner image; transferring the toner image on the electrostatic image bearing member with or without mediating an intermediate transferring member onto a transfer material; and fixing the toner image on the transfer material. The electrostatic image bearing member is a photosensitive member obtained by sequentially laminating a photoconductive layer and a surface layer formed of hydrogenated amorphous silicon carbide, and a sum of an atomic density of silicon atoms and an atomic density of carbon atoms in the surface layer of the photosensitive member is 6.60×1022 atoms/cm3 or more. The toner has a binder resin and magnetic iron oxide particles, and the magnetic iron oxide particles contain Fe(2+) at a content of 20.0 mass % or more and 25.0 mass % or less.
摘要:
Provided is a magnetic toner capable of providing a stable image by suppressing sleeve contamination even under a high-temperature and high-humidity environment and under a normal-temperature and low-humidity environment and further suppressing large-particle fogging caused after the toner is left alone for a week. The magnetic toner contains toner particles, each of which contains a binder resin and a magnetic iron oxide particle, in which the binder resin has a polyester unit, the toner has i) a dielectric loss factor at 40° C. and 100 kHz of 0.50 pF/m or more but 0.90 pF/m or less, and ii) a true specific gravity of 1.50 g/cm3 or more but 1.85 g/cm3 or less.
摘要翻译:提供一种即使在高温高湿环境下也能在常温低湿环境下即使通过抑制套筒污染来提供稳定图像的磁性调色剂,并且进一步抑制了在调色剂剩余之后引起的大颗粒起雾 独自一个星期。 磁性调色剂含有调色剂颗粒,每个调色剂颗粒含有粘合剂树脂和磁性氧化铁颗粒,其中粘合剂树脂具有聚酯单元,调色剂具有i)在40℃和100kHz的介电损耗系数为0.50 pF / m以上,0.90pF / m以下,ii)真比重为1.50g / cm 3以上,1.85g / cm 3以下。
摘要:
Provided is a toner including at least: a binder resin; and a colorant, in which: the binder resin contains at least a polyester unit and a vinyl copolymer unit; a main peak MpA is present in the molecular weight region of 2,000 to 7,000 in a molecular weight distribution measured by means of gel permeation chromatography (GPC) of a specific tetrahydrofuran (THF) soluble matter A measured by a specific method; a main peak MpB is present in the molecular weight region of 5,000 to 10,000 in a molecular weight distribution measured by means of GPC of a specific THF soluble matter B which contains a component of a molecular weight region of 100,000 or less in range from 70 to 100 mass %, and the peak molecular weight MpA of the THF soluble matter A and the peak molecular weight MpB of the THF soluble matter B satisfy a specific equation.
摘要:
A positively chargeable developer is provided which is capable of providing stable image quality without causing any image defect even in long-term use. The developer includes at least positively chargeable toner particles each containing at least a binder resin and magnetic iron oxide, silica and an inorganic fine powder. A unconfined yield strength at a major consolidation stress of 5 kPa of the developer is in the range of 0.1 to 2.5 kPa, and a unconfined yield strength at a major consolidation stress of 20 kPa of the developer is in the range of 2.5 to 5.5 kPa.
摘要:
A toner is provided which can stably provide a favorable density stability, line reproducibility and dot reproducibility even in high-speed copying machines, printers and the like which form high resolution latent images over a long period regardless of environmental conditions, and can provide the image quality adaptable to embedded pattern printing, QR code printing and the like. The present invention is characterized in that the toner which includes toner particles including at least a binder resin and a colorant, and a fine silica powder, has a volume median diameter (D50) of not less than 0.70 μm and not more than 3.00 μm, and a total pore volume of not more than 0.200 cm3/g, measured in the range of the pore diameter from not less than 1.7 nm and not more than 300.0 nm.
摘要:
Provided is a toner including at least: a binder resin; and a colorant, in which: the binder resin contains at least a polyester unit and a vinyl copolymer unit; a main peak MpA is present in the molecular weight region of 2,000 to 7,000 in a molecular weight distribution measured by means of gel permeation chromatography (GPC) of a specific tetrahydrofuran (THF) soluble matter A measured by a specific method; a main peak MpB is present in the molecular weight region of 5,000 to 10,000 in a molecular weight distribution measured by means of GPC of a specific THF soluble matter B which contains a component of a molecular weight region of 100,000 or less in range from 70 to 100 mass %, and the peak molecular weight MpA of the THF soluble matter A and the peak molecular weight MpB of the THF soluble matter B satisfy a specific equation.
摘要:
A positively chargeable developer is provided which is capable of providing stable image quality without causing any image defect even in long-term use. The developer includes at least positively chargeable toner particles each containing at least a binder resin and magnetic iron oxide, silica and an inorganic fine powder. A unconfined yield strength at a major consolidation stress of 5 kPa of the developer is in the range of 0.1 to 2.5 kPa, and a unconfined yield strength at a major consolidation stress of 20 kPa of the developer is in the range of 2.5 to 5.5 kPa.
摘要:
A magnetic toner includes a magnetic toner particle containing a binding resin and a magnetic material. The magnetic material includes a magnetic iron oxide containing 0.10% to 4.00% by weight of an element &agr; belonging to the third period to the seventh period with an atomic number of 11 to 103 and having an electronegativity of 1.0 to 2.5. The solubility S1 of &agr; in the magnetic material at an iron solubility of 0% to 20% is from 10% to less than 44% and the solubility S2 of &agr; at an iron solubility of 80% to 100% is from 5% to less than 30%. The magnetic material contains at least 60% by number of multinuclear magnetic iron oxide particles or at least 60% by number of polyhedral magnetic iron oxide particles having faces at ridgeline portions of hexahedron and/or octahedron multinuclear magnetic iron oxide particles.
摘要:
A toner for developing an electrostatic image is formed of toner particles; wherein each toner particle includes (i) 100 wt. parts of a binder resin having a glass transition point (Tg) of 50-70° C., (ii) 0.2-20 wt. parts of solid wax, and (iii) colorant particles or magnetic powder; (iv) lubricant particles carrying a liquid lubricant, so that the toner particle retains at its surface the liquid lubricant gradually released from the particles (iv). The toner may be further blended with an organically treated inorganic fine powder to provide a developer. The toner or developer retains good lubricity and releasability so that it is suitable to be used in an image forming method including means contacting a latent image-bearing means, such as a contact charging means, a contact transfer means or a contact cleaning means.