Abstract:
A synchronous rectifier using only n-channel devices in which the low-side switches are effectively cross-coupled using low-side comparators and the high-side switches perform an accurate zero-voltage-switching (ZVS) comparison. The charging path of each bootstrap domain is completed through the low-side switches, which are each always on for every half-cycle independent of loading. This scheme gives rectifier efficiency gain because a) each bootstrap domain receives maximum charging time, and b) the charging occurs through a switch rather than a diode. Both these factors ensure the bootstrap domain is fully charged, thereby reducing conduction losses through the rectifier switches. Furthermore, settings may be adjusted by software to optimize the resistive and capacitive losses of the rectifier. Using data for die temperature and operating frequency, software can create a feedback loop, dynamically adjusting rectifier settings in order to achieve the best possible efficiency.
Abstract:
A resonant wireless power (RWP) receiver is provided that includes an inductor element that couples with a resonant wireless power source. A capacitor arrangement is coupled to the inductor element altering the open-circuit impedance of the RWP receiver to reduce the ac voltage under certain defined situations. The capacitor arrangement includes a plurality capacitors tuned to a control ac voltage in the RWP receiver.
Abstract:
A resonant wireless power system includes a source circuit having a source coil, an ac driver with a first resistance, representing the equivalent output impedance of the ac driver, and a matching network. A current probe measures the magnitude signal of the instantaneous source coil current. A voltage probe measures the instantaneous ac driver voltage. A phase detector compares the phase of the instantaneous source coil current and the instantaneous ac driver voltage, and produces a first output signal proportional to the phase difference. A first amplifier compares the magnitude signal and a target signal, and produces an error signal proportional to the difference. A first compensation filter produces the control voltage that determines the ac driver supply voltage. A second amplifier amplifies the first output signal. A second compensation filter produces the control voltage that determines the impedance of a variable element in the source circuit.
Abstract:
A wireless power receiver IC in which the power path can be reconfigured as either a low-dropout regulator (LDO), a switched-mode power supply (SMPS) or a power switch (PSW) is provided. All three modes share the same pass device to reduce die area and share the same output terminal to reduce pin. In an inductive wireless receiver, the power path can be reprogrammed on the fly to LDO or PSW mode or can be reprogrammed on the fly to SMPS or PSW mode. In a resonant or multi-mode wireless receiver, the power path can be reprogrammed on the fly to SMPS or PSW mode. Furthermore, to achieve high power transfer efficiency performance, using N-channel MOSFET as its pass device has better efficiency and smaller die area than P-channel MOSFET pass device.
Abstract:
A resonant wireless power system includes a source circuit having a source coil, an ac driver with a first resistance, representing the equivalent output impedance of the ac driver, and a matching network. A current probe measures the magnitude signal of the instantaneous source coil current. A voltage probe measures the instantaneous ac driver voltage. A phase detector compares the phase of the instantaneous source coil current and the instantaneous ac driver voltage, and produces a first output signal proportional to the phase difference. A first amplifier compares the magnitude signal and a target signal, and produces an error signal proportional to the difference. A first compensation filter produces the control voltage that determines the ac driver supply voltage. A second amplifier amplifies the first output signal. A second compensation filter produces the control voltage that determines the impedance of a variable element in the source circuit.
Abstract:
A synchronous rectifier using only n-channel devices in which the low-side switches are effectively cross-coupled using low-side comparators and the high-side switches perform an accurate zero-voltage-switching (ZVS) comparison. The charging path of each bootstrap domain is completed through the low-side switches, which are each always on for every half-cycle independent of loading. This scheme gives rectifier efficiency gain because a) each bootstrap domain receives maximum charging time, and b) the charging occurs through a switch rather than a diode. Both these factors ensure the bootstrap domain is fully charged, thereby reducing conduction losses through the rectifier switches. Furthermore, settings may be adjusted by software to optimize the resistive and capacitive losses of the rectifier. Using data for die temperature and operating frequency, software can create a feedback loop, dynamically adjusting rectifier settings in order to achieve the best possible efficiency.
Abstract:
A resonant wireless power (RWP) receiver is provided that includes an inductor element that couples with a resonant wireless power source. A capacitor arrangement is coupled to the inductor element altering the open-circuit impedance of the RWP receiver to reduce the ac voltage under certain defined situations. The capacitor arrangement includes a plurality capacitors tuned to a control ac voltage in the RWP receiver.