摘要:
A control box kit for twinning fan coils in a heat pump or AC installation includes electro-mechanical isolation relays and auxiliary limit switches. Existing fan coil transformers are disconnected to avoid component failure due to high voltage wiring variations. A single transformer is connected to operate both systems. Isolation relays for the reversing valves and supplemental electric heaters in a heat pump system allow both heat pumps to have independent defrost cycles. The accessory transformer and isolation relays are packaged and pre-wired in a control box for easy connection in the field.
摘要:
In a heat pump system designed for use with a relatively low pressure refrigerant, provision is made, by use of a vapor pressure control system, to use a higher pressure refrigerant without replacement of the indoor coil and the line set. The vapor pressure is sensed during periods of heat pump operation, and when the pressure reaches a predetermined maximum threshold level, the outdoor fan speed is reduced to thereby cause the vapor pressure to be reduced. When the vapor pressure is reduced to a predetermined minimum threshold level, then the fan speed is resumed so as thereby allow the vapor pressure to again be increased.
摘要:
An electric element mounting system including a housing and at least one heating element. Each element includes a frame having a longitudinal axis and a distal end, a heating coil and a wire terminal for electrically and mechanically coupling the element to the front panel. A substantially planar mounting bracket is located within the housing; the bracket including at least one aperture. The bracket is located within the housing and placed in a plane perpendicular to the longitudinal axis of the frame so that the distal end is placed through the aperture to mount the element upon the bracket.
摘要:
A compressor assembly comprises a compressor, a motor protector, and a signaling device. Upon an overload condition, the motor protector activates. The signaling device also activates to serve as an alert that the compressor is not malfunctioning but instead is in an overload condition.