摘要:
In an image forming apparatus, first in a printing delay process, it is determined whether or not a specific mode is set. When it is determined that a specific mode is set, printing is inhibited until images to be printed are accumulated in a memory, and whether or not originals are mixed originals (of assorted sizes) is detected. If it is determined that originals are mixed ones, start of printing is inhibited. Since printing cannot be executed when a specific mode in which mixed originals cannot be handled is set, an image forming apparatus capable of automatically handling mixed originals can be provided.
摘要:
An image forming apparatus stores a plurality of jobs. When a process for a job is temporarily stopped due to any trouble of the apparatus or interruption, the job is not automatically resumed if an image reader and a printer operate for the same job. If the image reader and the printer operate for different jobs, only the printing operation is automatically resumed. In this case, the reading operation of the image reader is not automatically resumed.
摘要:
A maximum acceptable number (max.sub.-- req.sub.-- num(i)) is set for each transmission device (source of request) (i) which transmits image data. If it is determined that the maximum acceptable number is set for a source of request of a job, determination is made as to whether or not the number of currently accepted jobs from the source of request (current.sub.-- req.sub.-- num(i)) is less than the maximum acceptable number. If so, determination is made as to whether or not the number of jobs exceeds the maximum acceptable number which is the limit of acceptance of a memory in an image forming apparatus, if a currently requested job is accepted. If not exceeds, "acceptable" is given to the source of request. If exceeds, or if the number of currently accepted jobs from the source of request reaches the maximum acceptable number, "not acceptable" is transmitted to the source of request. Accordingly, an image forming apparatus is provided in which image data from a specific transmission device is accepted in preference to data from other transmission device when an image according to image data from a plurality of transmission devices is formed.
摘要:
Bus lines 20, 21 are connected to peripheral devices 1, 2 such that the polarities of the bus lines are replaced with each other according to an attachment position, and information acquisition units 16-1, 16-2 determine an attachment position P1 if the polarities of a connector terminal 10-1 (or 10-2) and a connector terminal 11-1 (or 11-2) are plus and minus, and determines an attachment position P2 if minus and plus.
摘要:
Body velocity estimating device 10A is constituted by acceleration measurement unit 11, acceleration separation unit 12, filter processing operation unit 13, acceleration addition unit 14, integration processing operation unit 15, and estimated body velocity output unit 16. The unit 12 compares an acceleration measured by the unit 11 with set acceleration upper and lower limit reference values to separate the measured acceleration into reference value range-in and range-out accelerations. The unit 13 performs filtering on the separated reference value range-out acceleration to calculate filtered accelerations of the reference value range-out acceleration. The unit 14 adds the filtered accelerations to the previously separated range-in acceleration. The unit 15 multiplies the added acceleration by an operation period, and adds the resultant to the estimated body velocity calculated in the preceding one operation period to update the value of the estimated body velocity. The unit 16 outputs the updated estimated body velocity.
摘要:
A rollover judging device adjusts the magnitude of an angular velocity component ω of a vehicle in a direction of a rollover, which is measured by an angular velocity sensor 1, by using an ω adjusting unit 3c on the basis of an acceleration component of the vehicle in its rightward or leftward direction or in its upward or downward direction, which is measured by an acceleration sensor 2, calculates an angle component θo by integrating with respect to time this adjusted angular velocity component ωo by using an integrator 3d, carries out predetermined multiplication and addition processes by using a judging means 4 on the basis of this angle component θo and the measured angular velocity component ω, and, when the result of this addition process exceeds a preset threshold Th, outputs a signal indicating judgment of occurrence of a rollover to an air bag control device 5.
摘要:
An activation apparatus for an occupant protection system includes acceleration sensors which are disposed on the respective right and left sides of a vehicle with respect to the center of the vehicle on the vehicle and each of which is provided for detecting the acceleration from the side opposite to the side where the sensor is disposed, and includes a determiner that determines whether or not an occupant protection system is to be activated by comparing the physical quantity computed based on the value detected and outputted by the acceleration sensor with a threshold for activating the occupant protection system.
摘要:
A sensor output correcting device includes: a sensor element for detecting a variation in an object to be measured, and for outputting this variation as a signal; an A/D converter for converting the analog signal outputted from the sensor element into a digital signal; a zero reference value calculating unit for calculating a zero reference value which is a drift amount of the sensor element from the signal outputted from the sensor element; a zero point correcting unit for correcting a zero point of the signal outputted from the A/D converter on the basis of the zero reference value calculated by the zero criterion calculating unit; an output limiting unit for limiting a value of an output signal inputted from the zero point correcting unit on the basis of a correction amount provided by the zero point correcting unit, and a high frequency removing unit for removing a high frequency component.
摘要翻译:传感器输出校正装置包括:用于检测被测量物体的变化并将该变化作为信号输出的传感器元件; A / D转换器,用于将从传感器元件输出的模拟信号转换为数字信号; 零参考值计算单元,用于根据从传感器元件输出的信号计算作为传感器元件的漂移量的零参考值; 零点校正单元,用于根据由零准则计算单元计算的零参考值来校正从A / D转换器输出的信号的零点; 输出限制单元,用于基于由零点校正单元提供的校正量来限制从零点校正单元输入的输出信号的值;以及高频去除单元,用于去除高频分量。
摘要:
A tilt angle detecting apparatus removes an unnecessary component included in an angular velocity detecting signal (an input ω) inputted from an angular velocity sensor 1 with the deadband (−ωo to +ωo) of an unnecessary component removing means 2, performs integration processing on the angular velocity detecting signal (an output ω) which is allowed to pass through the passband (input ω>ωo or input ω
摘要:
A battery inspection device inspects for internal short circuits in a battery. The conditions of battery modules B are inspected by measuring open circuit voltage signals of the battery modules that form a battery stack. The open circuit voltage signals are supplied to a detection circuit through voltage signal lines each prepared for each battery module. A voltage signal line and an address signal line A for passing an address signal to set an address which identifies the battery stack using a signal supplied from a signal source share a single line extending between the battery module and the detection circuit, and thus the number of signal lines is reduced.