摘要:
To provide a flowmeter capable of enhancing metering resolution to thus effect accurate metering.When a fluid to be measured is supplied to or discharged from a metering chamber 4, a membrane 11 provided in the metering chamber 4 is reciprocally actuated, and a rotation section R1 performs rotational movement in association with reciprocal movement of the membrane 11. At this time, since the rotation section R1 is provided with a magnet 5 or a direction sensor 6, the magnet 5 or the direction sensor 6 also effects rotational movement. The direction sensor 6 detects rotational movement, to thus determine a relative position between the membrane and the rotation section. Thus, the position of the membrane 11 can be detected, and metering resolution is enhanced. Thus, accurate metering can be performed.
摘要:
To provide a flowmeter capable of enhancing metering resolution to thus effect accurate metering. When a fluid to be measured is supplied to or discharged from a metering chamber 4, a membrane 11 provided in the metering chamber 4 is reciprocally actuated, and a rotation section R1 performs rotational movement in association with reciprocal movement of the membrane 11. At this time, since the rotation section R1 is provided with a magnet 5 or a direction sensor 6, the magnet 5 or the direction sensor 6 also effects rotational movement. The direction sensor 6 detects rotational movement, to thus determine a relative position between the membrane and the rotation section. Thus, the position of the membrane 11 can be detected, and metering resolution is enhanced. Thus, accurate metering can be performed.
摘要:
It is an objective to appropriately assure a function of limiting use of appliances that cause changes in quantities of gas used. There are provided a flow detection unit 10; a flow computing unit 11; an average flow computing unit 12; a flow storage unit 13 that records an average flow quantity value; a flow change determination unit 14 that determines whether there is a flow change; a flow registration unit 15 that registers a flow quantity corresponding to a flow change or deletes a registered flow quantity close to the flow change when the flow change determination unit 14 has determined an incremental or decremental change; a flow memory unit 16; a flow change correction memory unit 17 that, when the flow change determination unit has determined presence of a change and when only the maximum flow quantity is registered, determines whether or not a sum of registered flow quantities deleted in the past and an average flow fall within a predetermined range; a determination period unit 18 that, when no flow change is determined to have been for a predetermined time period, deletes flow quantities in the flow memory unit and the registered flow quantity, thereby performing re-registration; a monitoring value memory unit 19; an abnormality determination unit 20 that compares the flow quantity value in the flow registration unit with a determination value of the monitoring value memory unit, thereby determining presence or absence of an abnormality; and an operating time correction unit 22 that outputs a re-registration correction signal through use of a determination period unit.
摘要:
An object is to prevent a mistaken shutoff caused by the mistaken registration of an appliance of which an amount of gas used changes. An individual flow registration maintenance unit maintains a registered flow rate deleted due to an increase/decrease in flow rate, again, performs determination on the flow rate maintained when a new flow rate is registered or a flow rate added with the maintained flow rate, and in the case where it is regarded to be the same, re-register the maintained flow rate.
摘要:
It is an objective to appropriately assure a function of limiting use of appliances that cause changes in quantities of gas used. There are provided a flow detection unit 10; a flow computing unit 11; an average flow computing unit 12; a flow storage unit 13 that records an average flow quantity value; a flow change determination unit 14 that determines whether there is a flow change; a flow registration unit 15 that registers a flow quantity corresponding to a flow change or deletes a registered flow quantity close to the flow change when the flow change determination unit 14 has determined an incremental or decremental change; a flow memory unit 16; a flow change correction memory unit 17 that, when the flow change determination unit has determined presence of a change and when only the maximum flow quantity is registered, determines whether or not a sum of registered flow quantities deleted in the past and an average flow fall within a predetermined range; a determination period unit 18 that, when no flow change is determined to have been for a predetermined time period, deletes flow quantities in the flow memory unit and the registered flow quantity, thereby performing re-registration; a monitoring value memory unit 19; an abnormality determination unit 20 that compares the flow quantity value in the flow registration unit with a determination value of the monitoring value memory unit, thereby determining presence or absence of an abnormality; and an operating time correction unit 22 that outputs a re-registration correction signal through use of a determination period unit.
摘要:
An object is to prevent a mistaken shutoff caused by the mistaken registration of an appliance of which an amount of gas used changes. An individual flow registration maintenance unit maintains a registered flow rate deleted due to an increase/decrease in flow rate, again, performs determination on the flow rate maintained when a new flow rate is registered or a flow rate added with the maintained flow rate, and in the case where it is regarded to be the same, re-register the maintained flow rate.
摘要:
It is an object to acquire in real time information about the type of an appliance used at home, a cumulative time elapsed from installation of the appliance, and the like; preliminarily acquire inspection timing; and prevent occurrence of a problem in the appliance. There are provided an appliance determination section 13 that determines a gas appliance to be used from the quantity of momentary flow determined from a measured value of a flow measurement section 11 by predetermined arithmetic processing; an appliance setting section 43 capable of arbitrarily inputting appliance information about a monitoring target appliance; an appliance registration section 14 that registers a monitoring target appliance in accordance with a result of determination made by the appliance determination section 13 and an result of input performed with the appliance setting section 43; a timer section 16 that integrates and stores a time elapsed from a point in time when an appliance is registered as a monitoring target appliance in an appliance registration section 14 on a registered individual appliance basis; a communication section 41 that is connected to a monitoring center 40 with a communication line and that performs communication processing of flow information, appliance information, and the like; and a control section 15 that compares an integrated time of the timer section 16 with a preset monitoring time and outputs a signal for sending a report to a gas utility company or a user when the integrated time has exceeded the monitoring time.
摘要:
A relay device for relaying communication information communicated between an access point and an adapter, said relay device comprises a reception means for receiving the communication information transmitted to said relay device itself; a memory means having one or more memory areas, the memory means being configured to store ID of each communication device which is a next transmission destination, in each of the memory areas; a reading means for reading route information from the communication information, said route information including information specifying the memory area containing the ID of the communication device which is the next transmission destination and indicating a route constituted by communication devices provided in a range from at least said relay device itself to a final transmission destination; a transmission destination identifying means for identifying the ID of the communication device which is the next transmission destination, based on the memory area stored in the memory means and the route information read by the reading means; and a transmission means for transmitting the communication information to the communication device identified by the transmission destination identifying means.
摘要:
A flow-rate measurement device includes a first transducer and a second transducer which are provided in a fluid flow path to transmit and receive an ultrasonic signal, a timer unit which measures a propagation time of the ultrasonic signal propagating between the first transducer and the second transducer, and a flow-rate calculation unit which executes a unit measurement step a predetermined number of times and calculates a flow rate of a fluid flowing in the fluid flow path on the basis of the propagation times measured the predetermined number of times, the unit measurement step being an operation in which a direction of transmission to reception between the first transducer and the second transducer is switched and the timer unit measures the propagation times of the ultrasonic signal in both directions. The flow-rate calculation unit measures a flow rate value of the fluid by a precise measurement step in which the unit measurement step is executed a plural number of times to calculate the flow-rate and an exploratory measurement step in which the unit measurement step is executed a smaller number of times than the number of executions in the precise measurement step to calculate the flow rate.
摘要:
A flow-rate measurement device includes a first transducer and a second transducer which are provided in a fluid flow path to transmit and receive an ultrasonic signal, a timer unit which measures a propagation time of the ultrasonic signal propagating between the first transducer and the second transducer, and a flow-rate calculation unit which executes a unit measurement step a predetermined number of times and calculates a flow rate of a fluid flowing in the fluid flow path on the basis of the propagation times measured the predetermined number of times, the unit measurement step being an operation in which a direction of transmission to reception between the first transducer and the second transducer is switched and the timer unit measures the propagation times of the ultrasonic signal in both directions. The flow-rate calculation unit measures a flow rate value of the fluid by a precise measurement step in which the unit measurement step is executed a plural number of times to calculate the flow-rate and an exploratory measurement step in which the unit measurement step is executed a smaller number of times than the number of executions in the precise measurement step to calculate the flow rate.