摘要:
A system and method enable a wireless device to support simultaneously multiple push-to-talk (PTT) communications and interrupt certain PTT communication with higher priority ones. A user (302) subscribes to multiple PTT communication groups (314, 316) and designates one of the groups as the primary group. The wireless device receives and plays PTT communications from the multiple PTT communication groups and interrupts playing of a PTT communication from a non-primary group if a PTT communication is received from the primary PTT communication group.
摘要:
A wireless terminal receives base station position over an airlink, determines its relative position with respect to the base station and determines a timing adjustment correction. The wireless terminal applies the determined timing correction to control uplink signaling timing and achieve synchronization at the base station's receiver. The wireless terminal determines its relative velocity with respect to the base station and determines a Doppler shift adjustment which it adds to the uplink carrier frequency or to its baseband signal. A wireless terminal determines the position of a moving base station and determines timing and/or frequency corrections. Base station position is determined from the current time and stored information correlating the base station position with time, e.g., for a geo-synchronous satellite. Base station position information is determined from broadcast information, e.g., GPS base station position, for an aircraft base station. Wireless terminals may be mobile and include a GPS receiver for WIRELESS TERMINAL position determination.
摘要:
Downlink traffic channel data rate options and methods of indicating to a wireless terminal a utilized downlink data rate option are described. The downlink traffic channel rate option for a segment is conveyed using an assignment signal and/or a block in the downlink traffic channel segment which is not used for user data. Downlink segment assignment signals in some implementations allocate fewer bits for rate option indication than are required to uniquely identify each option, hi some implementations low rate options, e.g., using QPSK, are uniquely identified via assignment signals. Higher rate options, e.g., using QAMl 6 modulation, are conveyed via the distinct information block in the downlink traffic segment using a first coding/modulation method. Still higher rate options, e.g., using QAMl 6, QAM64, or QAM256, are conveyed via the information block in the segment using a second coding/modulation method which is applied to the rate option information.
摘要:
A wireless terminal using OFDM signaling supporting both terrestrial and satellite base station connectivity operates using conventional access probe signaling in a first mode of operation to establish a timing synchronized wireless link with a terrestrial base station. In a second mode of operation, used to establish a timing synchronized wireless link with a satellite base station, a slightly modified access protocol is employed. The round trip signaling time and timing ambiguity between a wireless terminal and a satellite base station is substantially greater than with a terrestrial base station. The modified access protocol uses coding of access probe signals to uniquely identify a superslot index within a beaconslot. The modified protocol uses multiple access probes with different timing offsets to further resolve timing ambiguity and allows the satellite base station access monitoring interval to remain small in duration. Terrestrial base station location/connection information is used to estimate initial timing.
摘要:
A stream of modulation symbols from a zero symbol rate (ZSR) coding/modulation module and a stream of modulation symbols from another type of coding/modulation module are input into an interweaver module. The interweaver module mixes the two input streams when assigning modulation symbols to be communicated in a segment. If a ZSR modulation symbol is non-zero, the ZSR modulation symbol is allocated a transmission position. If the ZSR modulation symbol is a zero modulation symbol, the modulation symbol from the other coding/modulation module is allocated the transmission position. The non-zero modulation symbols from the ZSR module are higher in power than the non-zero modulation symbols from the other module, thus facilitating detection and recovery.
摘要:
Methods and apparatus for efficient two-stage paging wireless communications systems are described. Wireless terminals are assigned to paging groups. A few first paging message information bits are modulated (using non-coherent modulation) into a first paging signal and communicated from a base station to wireless terminals. WTs wake-up, receive the first paging signal and quickly ascertain whether its paging group should expect a second paging signal, if so, the WT is operated to receive the second paging signal; otherwise, the WT goes back to sleep conserving power. The base station modulates (using coherent modulation) a number of second message information bits into a second paging signal and transmits the signal to WTs. From the information in first and second paging signals, a WT can determine that it is the paged WT and process the paging instructions. The intended paged WT can transmit an acknowledgement signal on a dedicated uplink resource.
摘要:
Special DC tone treatment in a wireless communications system, e.g., an OFDM system, is discussed. In the downlink, a wireless terminal receiver introduces self-interference at the DC tone from the RP/ baseband conversion. A base station thus does not transmit on the downlink DC tone according to a predetermined pattern while continuing to transmit on other downlink tones.. Wireless terminals measure received signal on the downlink DC tone during the time of suspended DC tone transmission, estimate self-interference and apply a correction to other received downlink DC tones. In the uplink DC tone interference is a composite of the assigned wireless terminal transmitter's baseband/RF conversion self-interference and air link noise. During one symbol interval of an N symbol interval dwell, the uplink DC tone is reserved for a special modulation symbol, which is a predetermined function of the other M-I modulation symbols. At the base station, its receiver receives a set of modulation symbols conveyed by the uplink DC tone for a dwell, calculates the average DC component and corrects the received N-I modulation symbols.
摘要:
Downlink traffic channel data rate options and methods of indicating to a wireless terminal a utilized downlink data rate option are described. The downlink traffic channel rate option for a segment is conveyed using an assignment signal and/or a block in the downlink traffic channel segment which is not used for user data. Downlink segment assignment signals in some implementations allocate fewer bits for rate option indication than are required to uniquely identify each option. In some implementations low rate options, e.g., using QPSK, are uniquely identified via assignment signals. Higher rate options, e.g., using QAM16 modulation, are conveyed via the distinct information block in the downlink traffic segment using a first coding/modulation method. Still higher rate options, e.g., using QAM16, QAM64, or QAM256, are conveyed via the information block in the segment using a second coding/modulation method which is applied to the rate option information.
摘要:
Methods and apparatus for implementing and/or using amplifiers and performing various amplification related operations are described. The methods are well suited for use with, but not limited to, switching type amplifiers. The methods and apparatus described herein allow for the use of switching amplifiers while reducing and/or compensating for distortions that the use of such amplifiers would normally create. The described methods and apparatus can be used alone or in combination with various novel signaling schemes which can make it easier to compensate for the non-ideal behavior of switching amplifiers in such a way as to enable practical application in wireless transmission and/or other applications.
摘要:
Mobile nodes support simultaneous OFDM links with multiple points of network attachment. A MN may simultaneously use multiple IP addresses, allowing packets addressed to the mobile to be routed over different paths. Alternatively, the MN may have a single IP address with packets corresponding to different applications, e.g., identified by packet header information, being routed over different paths. Thus packets corresponding to one application, e.g., a voice application, may be routed over one wireless link while packets corresponding to another application, e.g., a data application such as E-mail, may be routed over another wireless link, while packets corresponding to still another application, e.g., a broadcast TV service may be communicated over another wireless link. The direction of communication, latency, reliability and other QoS characteristics of the different wireless links may be considered in path selection to provide MN's user with cost effective service while still meeting minimum application requirements.