摘要:
Process for producing an optical coupler for polymer optical waveguides by arranging the optical waveguides in the same sense and bundling them by means of a plastic shrink-on sleeve. In this process, two to 10.sup.5 polymer optical waveguides are arranged in the same sense and bundled and a plastic tube is put over the mixing region. Then a piece of plastic shrink-on sleeve is pushed over the plastic tube and the shrink-on sleeve is heated to a temperature at which it contracts. The shrinkage temperature of the shrink-on sleeve is inside the thermoelastic temperature range of the plastic tube. The optical waveguide bundle may be stretched during or after heating.
摘要:
A light detector consists of a plate-like light-absorbing body and at least one optical waveguide connected thereto. Both parts of the light detector contain a fluorescent dye, whereby the irradiated light is converted into a fluorescence radiation. This radiation is guided by total reflection to a light-sensitive semiconductor element and is measured there. The light detector is suitable as light barrier, fiber-optic revolution counter or UV detector.
摘要:
A transparent material of very good heat resistance and very good light conductivity is essentially composed of a polymer derived mainly from bromophenyl acrylates or bromophenyl methacrylates.
摘要:
A transparent thermoplastic molding compound consisting of 40 to 90% by weight of units derived from tetrafluoroethylene, and 60 to 10% by weight of units derived from compounds of formula I or II:CF.sub.2 .dbd.CF--O--(CF.sub.2 --CF(CF.sub.3)--O).sub.m --(CF.sub.2).sub.n --CF.sub.3 (I)CF.sub.2 .dbd.CF--O--(CF.sub.2 --CF(CF.sub.3)--O).sub.p --(CF.sub.2).sub.q --COO--R (II)is particularly suitable for manufacturing the sheath of beam waveguides whose core has a higher transparency than polymethyl methacrylate.
摘要:
Mechanically robust star couplers of polymer optical waveguides having low insertion losses and small fluctuations between the individual output fibers are obtained if polymer optical waveguides are arranged in parallel in the middle region of an apparatus and fused with one another under pressure and with the supply of heat. The optical cladding of the polymer optical waveguides has been previously removed. The method is easy and cost-effective. The apparatus is composed of a lower part with a channel recessed therein and an upper part with a male die located therein, which male die corresponds in its shape to the shape of the channel.
摘要:
Channels in which polymeric optical waveguides can be laid can be milled in surfaces of plastic sheets by means of an excimer laser. The free space between the optical waveguides is filled up with a transparent casting resin.The channels produced by means of the laser are distinguished by high dimensional accuracy and low surface roughness.