摘要:
Prior to failure determination of a three-way catalyst, which is carried out on the basis of a reverse frequency ratio of upstream and downstream O2 sensors, deterioration determination is performed at the point when the reverse frequency ratio of the O2 sensors starts to increase, and low NOx control is then implemented. The implement of the low NOx control makes it possible to compensate for the deterioration of the three-way catalyst with respect to NOx purification and to keep NOx emissions from the three-way catalyst equal to or less than the regulation value.
摘要:
Prior to failure determination of a three-way catalyst, which is carried out on the basis of a reverse frequency ratio of upstream and downstream O2 sensors, deterioration determination is performed at the point when the reverse frequency ratio of the O2 sensors starts to increase, and low NOx control is then implemented. The implement of the low NOx control makes it possible to compensate for the deterioration of the three-way catalyst with respect to NOx purification and to keep NOx emissions from the three-way catalyst equal to or less than the regulation value.
摘要:
An electric vehicle includes engine in which the amount of fuel supply is controlled by a throttle, a generator that produces electricity using the power of the engine, a motor outputs power to a drive shaft, an EGR system that supplies gas, exhausted from the engine, to a manifold of the engine, a clutch that switches between the transmission and the non-transmission of power from the engine to the drive shaft, a sensor that measures the change of a pressure of the manifold before and after the EGR system supplies the gas to the manifold, and ECU that performs fault detection of the EGR system using the sensor when conditions, where a series mode is selected, the degree of opening of the throttle is constant, are satisfied.
摘要:
A deterioration diagnostic system of an exhaust gas purifying catalyst includes: an upstream side switching frequency calculator calculating the number of times of switching on the upstream side; a reference value calculator calculating a downstream side rich/lean determination level having a first width; a downstream side rich/lean determination level adjuster setting the first width to a second larger width when the number of times of switching on the upstream side is smaller than a predetermined value; a downstream side switching frequency calculator calculating the number of times of switching on the downstream side; a frequency ratio calculator calculating a frequency ratio between the number of times of switching on the downstream side and the number of times of switching on the upstream side; and a deterioration determiner determining the deterioration of the exhaust gas purifying catalyst when the frequency ratio is larger than a predetermined value.
摘要:
When the opening angle of an intake control valve is limited to a given opening angle by fuel cut, an EGR apparatus is activated, and a malfunction of the EGR apparatus is diagnosed on the basis of a change in intake manifold pressure before and after the activation of the EGR apparatus. When the control for reducing the intake-manifold negative pressure is not implemented, the change of the intake manifold pressure is corrected with a changing amount of first reference intake pressure (P(Ne)) changed by engine speed Ne. When the control for reducing the intake manifold genitive pressure is implemented, the change of the intake manifold pressure is corrected with a changing amount of second reference intake pressure (PL(Ne)) changed by engine speed Ne.
摘要:
When the opening angle of an intake control valve is limited to a given opening angle by fuel cut, an EGR apparatus is activated, and a malfunction of the EGR apparatus is diagnosed on the basis of a change in intake manifold pressure before and after the activation of the EGR apparatus. When the control for reducing the intake-manifold negative pressure is not implemented, the change of the intake manifold pressure is corrected with a changing amount of first reference intake pressure (P(Ne)) changed by engine speed Ne. When the control for reducing the intake manifold genitive pressure is implemented, the change of the intake manifold pressure is corrected with a changing amount of second reference intake pressure (PL(Ne)) changed by engine speed Ne.
摘要:
A deterioration diagnostic system of an exhaust gas purifying catalyst includes: an upstream side switching frequency calculator calculating the number of times of switching on the upstream side; a reference value calculator calculating a downstream side rich/lean determination level having a first width; a downstream side rich/lean determination level adjuster setting the first width to a second width larger than the first width when the number of times of switching on the upstream side is smaller than a predetermined value; a downstream side switching frequency calculator calculating the number of times of switching on the downstream side; an intake air volume calculator calculating an intake air volume; a frequency ratio calculator calculating a frequency ratio between the number of times of switching on the downstream side and the number of times of switching on the upstream side; and a deterioration determiner determining the deterioration of the exhaust gas purifying catalyst when the frequency ratio is larger than a predetermined value.
摘要:
A high-strength cold rolled steel sheet contains:0.10 to 0.28% of C,1.0 to 2.0% of Si,1.0 to 3.0% of Mn, and0.03 to 0.10% of Nb in terms of % by mass,Al is controlled to 0.5 or less, P is controlled to 0.15% or less, and S is controlled to 0.02% or less, and residual austenite accounts for 5 to 20%, bainitic ferrite accounts for 50% or more, and polygonal ferrite accounts for 30% or less (containing 0%), of the entire structure, and a mean number of residual austenite blocks is 20 or more as determined when the random area (15 μm×15 μm) is observed by EBSP (electron back scatter diffraction pattern).
摘要:
An electronic apparatus includes a keyboard unit, a first circuit board, and a first electronic component. The keyboard unit includes a plate that includes a front surface and a bottom surface facing each other and a first coupling portion protruding from the bottom surface, and a plurality of keys provided on the front surface side of the plate. The first circuit board is provided to face the bottom surface via the first coupling portion and includes a second coupling portion to be coupled with the first coupling portion and a first front surface as a surface on a side that faces the bottom surface. The first electronic component is mounted on the first front surface of the first circuit board.
摘要:
A surface-treating process and a forming process in which an inner surface of a vacuum member is mechanically polished in the presence of a liquid medium including no hydrogen atom.