摘要:
Techniques for controlling transmit power and the amount of overlapping in a quasi-orthogonal system are described. A base station for a sector receives transmissions from terminals in that sector and neighbor sectors and determines performance metrics (e.g., overall throughput) and/or QoS metrics (e.g., minimum data rate) for the terminals in the sector. The base station updates an overlapping factor based on the performance metrics and updates a QoS power control parameter based on the QoS metrics. The overlapping factor indicates the average number of overlapping transmissions sent simultaneously on each time-frequency block usable for data transmission. The QoS power control parameter ensures that the terminals in the sector can achieve minimum QoS requirements. A power control mechanism with multiple loops is used to adjust the transmit power of each terminal. The overlapping factor and QoS power control parameter are updated by two of the loops.
摘要:
Techniques for controlling transmit power and the amount of overlapping in a quasi-orthogonal system are described. A base station for a sector receives transmissions from terminals in that sector and neighbor sectors and determines performance metrics (e.g., overall throughput) and/or QoS metrics (e.g., minimum data rate) for the terminals in the sector. The base station updates an overlapping factor based on the performance metrics and updates a QoS power control parameter based on the QoS metrics. The overlapping factor indicates the average number of overlapping transmissions sent simultaneously on each time-frequency block usable for data transmission. The QoS power control parameter ensures that the terminals in the sector can achieve minimum QoS requirements. A power control mechanism with multiple loops is used to adjust the transmit power of each terminal. The overlapping factor and QoS power control parameter are updated by two of the loops.
摘要:
For interference control, a sector m estimates interference observed from terminals in neighbor sectors and obtains an interference estimate. Sector m may generate an over-the-air (OTA) other-sector interference (OSI) report and/or an inter-sector (IS) OSI report based on the interference estimate. Sector m may send the IS OSI report to the neighbor sectors, receive IS OSI reports from the neighbor sectors, and regulate data transmissions for terminals in sector m based on the received IS OSI reports. Sector m may control admission of terminals to sector m, de-assign admitted terminals, schedule terminals in sector m in a manner to reduce interference to the neighbor sectors, and/or assign the terminals in sector m with traffic channels that cause less interference to the neighbor sectors.
摘要:
For interference control, a sector m estimates interference observed from terminals in neighbor sectors and obtains an interference estimate. Sector m may generate an over-the-air (OTA) other-sector interference (OSI) report and/or an inter-sector (IS)OSI report based on the interference estimate. Sector m may send the IS OSI report to the neighbor sectors, receive IS OSI reports from the neighbor sectors, and regulate data transmissions for terminals in sector m based on the received IS OSI reports. Sector m may control admission of terminals to sector m, de-assign admitted terminals, schedule terminals in sector m in a manner to reduce interference to the neighbor sectors, and/or assign the terminals in sector m with traffic channels that cause less interference to the neighbor sectors.
摘要:
For interference control, a sector m estimates interference observed from terminals in neighbor sectors and obtains an interference estimate. Sector m may generate an over-the-air (OTA) other-sector interference (OSI) report and/or an inter-sector (IS)OSI report based on the interference estimate. Sector m may send the IS OSI report to the neighbor sectors, receive IS OSI reports from the neighbor sectors, and regulate data transmissions for terminals in sector m based on the received IS OSI reports. Sector m may control admission of terminals to sector m, de-assign admitted terminals, schedule terminals in sector m in a manner to reduce interference to the neighbor sectors, and/or assign the terminals in sector m with traffic channels that cause less interference to the neighbor sectors.
摘要:
For interference control, a sector m estimates interference observed from terminals in neighbor sectors and obtains an interference estimate. Sector m may generate an over-the-air (OTA) other-sector interference (OSI) report and/or an inter-sector (IS) OSI report based on the interference estimate. Sector m may broadcast the OTA OSI report to the terminals in the neighbor sectors. These terminals may adjust their transmit powers based on the OTA OSI report. Sector m may send the IS OSI report to the neighbor sectors, receive IS OSI reports from the neighbor sectors, and regulate data transmissions for terminals in sector m based on the received IS OSI reports. Sector m may control admission of terminals to sector m, de-assign admitted terminals, schedule terminals in sector m in a manner to reduce interference to the neighbor sectors, and/or assign the terminals in sector m with traffic channels that cause less interference to the neighbor sectors.
摘要:
For Quality of Service (QoS) implementation in a multiple-access communication system, a base station processes data transmissions from terminals for all QoS classes supported by the system and obtains status information for the data transmissions. The status information may indicate whether each packet is decoded correctly or in error and the delay for each packet. For each QoS class, the base station derives one or more metrics based on the status information for data transmissions from disadvantaged terminals and updates the QoS parameter based on the metrics and requirements for the QoS class. The QoS parameter for each QoS class determines the transmit powers for the data transmissions sent for that QoS class. The base station broadcasts the QoS parameters for all QoS classes. Each terminal uses the QoS parameter for an applicable QoS class for power control of the data transmission sent to the base station.
摘要:
Techniques for performing power control of multiple channels sent using multiple radio technologies are described. The transmit power of a reference channel, sent using a first radio technology (e.g., CDMA), is adjusted to achieve a target level of performance (e.g., a target erasure rate) for the reference channel. The transmit power of a data channel, sent using a second radio technology (e.g., OFDMA), is adjusted based on the transmit power of the reference channel. In one power control scheme, a reference power spectral density (PSD) level is determined based on the transmit power of the reference channel. A transmit PSD delta for the data channel is adjusted based on interference estimates. A transmit PSD of the data channel is determined based on the reference PSD level and the transmit PSD delta. The transmit power of the data channel is then set to achieve the transmit PSD for the data channel.
摘要:
Techniques for performing power control of multiple channels sent using multiple radio technologies are described. The transmit power of a reference channel, sent using a first radio technology (e.g., CDMA), is adjusted to achieve a target level of performance (e.g., a target erasure rate) for the reference channel. The transmit power of a data channel, sent using a second radio technology (e.g., OFDMA), is adjusted based on the transmit power of the reference channel. In one power control scheme, a reference power spectral density (PSD) level is determined based on the transmit power of the reference channel. A transmit PSD delta for the data channel is adjusted based on interference estimates. A transmit PSD of the data channel is determined based on the reference PSD level and the transmit PSD delta. The transmit power of the data channel is then set to achieve the transmit PSD for the data channel.
摘要:
For interference control, a sector m estimates interference observed from terminals in neighbor sectors and obtains an interference estimate. Sector m may generate an over-the-air (OTA) other-sector interference (OSI) report and/or an inter-sector (IS) OSI report based on the interference estimate. Sector m may broadcast the OTA OSI report to the terminals in the neighbor sectors. These terminals may adjust their transmit powers based on the OTA OSI report. Sector m may send the IS OSI report to the neighbor sectors, recieve IS OSI reports from the neighbor sectors, and regulate data transmissions for terminals in sector m based on the received IS OSI reports. Sector m may control admission of terminals to sector m, de-assign admitted terminals, schedule terminals in sector m in a manner to reduce interference to the neighbor sectors, and/or assign the terminals in sector m with traffic channels that cause less interference to the neighbor sectors.