摘要:
An accumulator having an acid electrolyte and possessing two electrodes of the first kind mounted on base electrodes. The active material on the positive side contains manganese dioxide. The base electrode on the negative side consists of powdered graphite embedded in a binder which is resistant to the electrolyte. The base electrode on the positive side has a coarse porous structure and consists of graphite or titanium coated with titanium nitride or titanium carbide. The average pore diameters are from 0.1 to 2 mm and the pore volume is from 20 to 70%.
摘要:
In a secondary battery employing an aqueous lead salt solution as the electrolyte, salts of manganese, cobalt, nickel, copper, thallium, bismuth and/or antimony are additionally present in concentrations of from 0.1 to 100 mmole/l.
摘要:
Secondary batteries with aqueous acid solutions of lead salts as electrolytes and inert electrode base plates also contain redox systems in solution. These systems have a standard potential of from -0.1 to +1.4 V relative to a standard hydrogen reference electrode, do not form insoluble compounds with the electrolytes and are not oxidized or reduced irreversibly by the active compositions applied to the electrode base plates, within their range of operating potentials.
摘要:
Thermoplastic compositions based on mixtures of a vinyl chloride polymer and conventional reinforcing agents.The compositions contain a linear polyester, which is solid at room temperature and is compatible with the vinyl chloride polymer, as a processing assistant.The thermoplastic compositions may in particular be used for the manufacture of injection moldings.
摘要:
Polyacetal molding materials which contain, as a stabilizer, from 0.1 to 10% by weight of a melamine resin, the latter being a melamine-formaldehyde condensate, having a mean degree of polymerization of from 1.2 to 6.0 and a melamine:formaldehyde ratio of from 1:2 to 1:5.5, which has been partially etherified with a C.sub.1 -C.sub.4 -alkanol so that the ratio melamine:ether radicals is from 1:1.5 to 1:5.0 and the ratio melamine:free methylol groups is from 1:0.5 to 1:3. The molding materials can be converted to moldings which can be used industrially at elevated ambient temperatures.
摘要:
Novel anodes consist of a mixture of from 30 to 95% by weight of nagnetite, lead dioxide, magnetite/natural graphite mixture or lead dioxide/natural graphite mixture and from 70 to 5% by weight of a plastic. They may be used for the surface-coating of metallic substrates by cathodic electrocoating.
摘要:
Thermoplastic molding materials contain, as essential components,A) from 5 to 94% by weight of a polyamide,B) from 5 to 94% by weight of a polyphenylene ether,C) from 1 to 20% by weight of a partially hydrogenated PQP' block copolymer, where.alpha.) the blocks P and P' consist of vinylaromatic monomers and the total amount of these blocks in the block copolymer is from 25 to 40% by weight,.beta.) the number average molecular weight of block P is not more than 8,000 and is smaller than the number average molecular weight of block P',.gamma.) block Q consists of conjugated diene monomers and accounts in total for from 60 to 75% by weight of the block copolymer and.delta.) from 5 to 30% by weight of the double bonds in block Q are not hydrogenated, andD) from 0 to 50% by weight of a vinylaromatic polymer.
摘要:
Thermoplastic molding materials containing, as essential components,(A) 5-95% by weight of a partially aromatic copolyamide essentially composed of(A.sub.1) 20-90% by weight of units derived from terephthalic acid and hexamethylenediamine(A.sub.2) 0-50% by weight of units derived from .epsilon.-caprolactam and(A.sub.3) 0-80% by weight of units derived from adipic acid and hexamethylenediamine,(B) 5-95% by weight of a polyphenylene ether,(C) 0-45% by weight of a vinylaromatic polymer and(D) 0-40% by weight of a rubber impact-modifier, are prepared.
摘要:
A process for the preparation of finely divided polyolefin molding materials from 100 parts by weight of a polyolefin and from 0.01 to 30 parts by weight of an electrically conductive additive, with or without other additives, wherein the mixture of the finely divided polyolefin particles and the electrically conductive additives is brought to the crystallite melting point of the polyolefin by the heating effect of the mixing action, and is then brought to a temperature which is from 3.degree. to 40.degree. C. above the said crystallite melting point while being subjected to a defined mixing intensity, after which the mixture is either cooled within 120 seconds or is directly compression-molded.
摘要:
Thermoplastic molding materials containA) not less than 5% by weight of a polymer component consisting of from 50 to 100% by weight of polyphenylene ethers and from 0 to 50% by weight of a styrene polymer differing from component C),B) not less than 5% by weight of a polyester,C) not less than 0.1% by weight of a copolymer consisting ofC.sub.1) not less than 20% by weight of .alpha.-olefins of 2 to 8 carbon atoms, styrene or substituted styrenes of the general formula I ##STR1## where R and R.sup.1 is alkyl of 1 to 8 carbon atoms, hydrogen and/or halogen and n is 0, 1 or 2, or a mixture of these monomers,C.sub.2) not less than 0.5% by weight of a polymerizable monomer containing epoxide groups, and/orC.sub.3) not less than 0.05% by weight of a halobenzyl-containing polymerizable monomer having the structural unit (II) ##STR2## where X is halogen and R.sup.2 and R.sup.3 are each alkyl of 1 to 8 carbon atoms or hydrogen and n is 1, 2 or 3, and/orC.sub.4) not less than 0.05% by weight of a polymerizable monomer containing oxazoline groups, andC.sub.5) from 0 to 65% by weight of acrylonitrile, methacrylonitrile and further nonionic comonomers, andD) from 0 to 40% by weight of a rubber impact modifier.