摘要:
Techniques disclosed herein include systems and methods for extending an IGMP broadcast domain (multicast domain) across a transport network without implementing IGMP snooping within the core of the transport network, yet while providing efficient transport within the core of the transport network. Techniques include dividing a single IGMP interface into multiple IGMP domains or sub-domains. A separate Querier is then elected for each IGMP domain using the single IGMP interface. Edge nodes of the transport network can be configured as the multiple IGMP Queriers, and then re-distribute sender information via a separate routing protocol. Requests can then be sent using the transport network control messaging or routing protocol instead of IGMP snoop messages to advertise multicast data streams in between the multiple IGMP domains (across the transport network). Traffic can then delivered efficiently between isolated access networks of a single Service Layer 2 Network.
摘要:
Techniques disclosed herein include systems and methods for extending an IGMP broadcast domain (multicast domain) across a transport network without implementing IGMP snooping within the core of the transport network, yet while providing efficient transport within the core of the transport network. Techniques include dividing a single IGMP interface into multiple IGMP domains or sub-domains. A separate Querier is then elected for each IGMP domain using the single IGMP interface. Edge nodes of the transport network can be configured as the multiple IGMP Queriers, and then re-distribute sender information via a separate routing protocol. Requests can then be sent using the transport network control messaging or routing protocol instead of IGMP snoop messages to advertise multicast data streams in between the multiple IGMP domains (across the transport network). Traffic can then delivered efficiently between isolated access networks of a single Service Layer 2 Network.
摘要:
Techniques disclosed herein include systems and methods for providing a scalable solution to transmit edge IP Multicast sender information in a Shortest Path Bridging (SPB) network. Control information is exchanged between Ingress Backbone Edge Bridges and Egress Backbone Edge Bridges using Multicast Flow Specific and type-length-value (TLV) structures, or other control messages, to announce available multicast streams at ingress nodes within the SPB network. Such exchanges of control messages trigger sending SPB specific Intermediate System To Intermediate System (IS-IS) TLV control message with path computation information via IS-IS control messages. This second set of control messages is exchanged within the SPB network and includes source-specific multicast stream information that is used by Backbone Core Bridges to establish a multicast forward state and compute multicast forwarding paths. Multicast data traffic can then be transmitted through the SPB network using a one-to-many distribution model.
摘要:
Techniques disclosed herein include systems and methods for improving multicast traffic operations in a Shortest Path Bridging (SPB) network by conveying bridging domain information of an incoming interface (IIF) when transporting multicast traffic over the SPB network. Techniques disclosed herein include modifying encapsulation packet header information of existing Mac-In-Mac fields to convey additional information that can be interpreted at edge nodes by modifying edge node interpretation of multicast data. Specifically, the value of the I-SID in the BMAC-DA field can be set to be different from the I-SID value in the I-TAG field. Carrying the L2 VSN I-SID value in the I-TAG allows the Egress BEBs to determine which VLAN/L2 VSN/Bridging-Domain of the IIF is in use, and then modify or preserve underlying header information accordingly.
摘要:
Techniques herein include systems and methods that extend functionality of transport networks including Transparent Interconnect of Lots of Links (TRILL) networks. Techniques include using a portion of information within transport device address encapsulation headers for purposes other than identifying source and destination device addresses. The system masks a portion of bits in an address header for an address lookup in forwarding tables of a transport network node. The remaining bits in the address field(s) become free bits that can be used for a variety of application purposes, such as flow identifier selection. By using information fields that already exist in encapsulation headers, such techniques provide additional information without increasing packet size or requiring new protocols. Embodiments can combine Equal-cost multi-path routing (ECMP) functionality, Reverse Path Forwarding (RPF) checks, and Time to live (TTL) protection at the same time.
摘要:
An OAM link trace message is sent from a source node to a target node in a link state protocol controlled Ethernet network. The link trace message using an 802.1ag format except, as a destination address, it uses either the unicast Ethernet MAC node ID of the target node, or the multicast destination address of the service instance. A method of network topology verification in a link state protocol controlled Ethernet network checks the link state protocol database at a node to ascertain the control plane topology view of at least part of the network. It then executes one or more Ethernet OAM commands from the node to ascertain the data plane topology view of the same part of the network. The control plane topology view of the network is compared to the data plane topology view of the network to see if they match. An error is flagged if they do not match.
摘要:
Embodiments herein include systems and methods for providing a mechanism for tunneled data transport within a dual homed access network. A tunnel manager, at a first network connectivity device in a transport network, identifies the transport network configured to interconnect at least two access networks for transporting data traffic between one or more end stations connected to the access networks. The first network connectivity device is coupled to a first access network. The tunnel manager identifies a second network connectivity device. The second network connectivity device is coupled to the first access network to provide the first access network dual homed access to the transport network via the first and second network connectivity devices. The tunnel manager creates a virtual tunnel that connects the first and second network connectivity devices to a third network connectivity device across the transport network. The virtual tunnel defines a same virtual tunnel having multiple paths such that the third network connectivity device learns a single virtual tunnel for device address learning.
摘要:
Ethernet OAM MEPs are automatically configured in a link state protocol controlled Ethernet network. A node operating in the link state protocol controlled Ethernet network receives a Link State PDU (LSP) containing a TLV having a MEP associated with the Ethernet MAC node ID of a second node in the link state protocol controlled Ethernet network, where the path between the first and second node includes a plurality of links. The node updates a forwarding table to indicate an association between the MEP ID and a Ethernet MAC node ID of the second node. An Ethernet OAM maintenance endpoint is produced in a link state protocol controlled Ethernet network by hashing a Sys-ID to produce a MEP; storing the MEP in a TLV; and forwarding the TLV over the link state protocol controlled Ethernet network in an LSP.
摘要:
A method, apparatus and computer program product for resolving conflicting unicast advertisements in transport network is presented. A particular Backbone Virtual Local Area Network (BVLAN) as a first BVLAN (BVLAN1) on a first network device in a transport network. The first network device receives a first message from a second network device advertising a first Backbone Media Access Channel (BMAC) on a first BVLAN (BMAC1,BVLAN1). The first network device receives a second message from a third network device advertising the (BMAC1,BVLAN1). The (BMAC1,BVLAN1) is assigned to the device of the second network device and the third network device having a lower Identifier (ID) value, wherein the ID value comprises one of the group comprising an Intermediate System to Intermediate System (ISIS) system ID and a Shortest Path Bridging (SPB) bridge ID.
摘要:
Ethernet OAM MEPs are automatically configured in a link state protocol controlled Ethernet network. A node operating in the link state protocol controlled Ethernet network receives a Link State PDU (LSP) containing a TLV having a MEP associated with the Ethernet MAC node ID of a second node in the link state protocol controlled Ethernet network, where the path between the first and second node includes a plurality of links. The node updates a forwarding table to indicate an association between the MEP ID and a Ethernet MAC node ID of the second node. An Ethernet OAM maintenance endpoint is produced in a link state protocol controlled Ethernet network by hashing a Sys-ID to produce a MEP; storing the MEP in a TLV; and forwarding the TLV over the link state protocol controlled Ethernet network in an LSP.