摘要:
A patch antenna is provided with one or more tuning strips spaced therefrom and RF switches to connect or block RF currents therebetween. When a control system for the antenna selectively connects and isolates RF currents between certain of the tuning strips and the patch, the tuning strips change the effective length of the patch and thus the antenna's resonant frequency, thereby frequency tuning the antenna electrically over a relatively broad band of frequencies. The control system includes circuitry for rapidly switching the antenna to a desired frequency with minimal delay and with superior isolation from the antenna, making it suitable for use in DAMA, TDMA, and other frequency hopping applications.
摘要:
A patch antenna is composed of a segmented patch and MEMS switches which are built on a substrate. The patch segments of the segmented patch can be electrically connected to each other by the MEMS switches to form a contiguous patch and optional tuning strips and to connect or block RF between the contiguous patch and the optional tuning strips. When RF is connected between the tuning strips and the contiguous patch, the tuning strips increase the effective length of the contiguous patch and lower the antenna's resonant frequency, thereby allowing the antenna to be frequency tuned electrically over a relatively broadband of frequencies. When the tuning strips are connected to the patch in other than a symmetrical pattern, the antenna pattern of the antenna can be changed. In another aspect of the invention, the optional tuning strips are continuous structures that are formed by connecting patch segments using switches. A planar inverted F antenna (PIFA) is also provided with one or more tuning strips spaced from the lid of the PIFA and with switches to connect or block RF between the lid of the PIFA and the tuning strips.
摘要:
An antenna consisting of a thin strip bent-wire monopole disposed on an artificial magnetic conductor (AMC) is loaded at the end opposite to the feed point with a distributed or lumped capacitance to achieve an electrically small antenna for use in handheld wireless devices. The capacitive load reduces the length of the antenna to smaller than one-quarter of a wavelength at a given frequency of operation without suffering a substantial loss of efficiency. This results in an easier integration into portable devices, greater radiation efficiency than other loaded antenna approaches and longer battery life in portable devices, and lower cost than use of a chip inductor.
摘要:
A tunable artificial dielectric material achieves the weight reductions made possible in U.S. Pat. No. 6,075,485 and further achieves even higher resonant frequency tuning ratios. In one embodiment of the invention, the artificial dielectric substrate for a patch antenna comprises alternating low and high permittivity layers, with the high permittivity layers each comprised of printed capacitive Frequency Selective Surface (FSS). An example FSS of the invention has a voltage tunable effective sheet capacitance by virtue of varactor diodes integrated into each unit cell. By appropriate adjustment of the bias voltage across the varactor diodes, the amount of the electric field stored in the substrate can be varied, which further varies the resonant frequency of the patch antenna.
摘要:
An antenna beamformer is disclosed that uses controllable time delay elements distributed in a planar fractal feed network between the input port and multiple output ports. The use of time delay elements, rather than phase shifting elements, allows the beamformer to maintain a constant steering angle independent of frequencies over a broad range of frequencies. In addition, fewer control signals are used to control all of the time delay elements due to distributing the time delay elements throughout the fractal feed network, rather than grouping the delay elements near the output ports.
摘要:
An artificial anisotropic dielectric material is used as a microstrip patch antenna substrate and can achieve dramatic antenna weight reduction. The artificial dielectric is comprised of a periodic structure of low and high permittivity layers. The net effective dielectric constant in the plane parallel to the layers is engineered to be any desired value between the permittivities of the constituent layers. These layers are oriented vertically below the patch to support electric fields consistent with desired resonant modes. Substrates may be engineered for both linearly and circularly polarized patch antennas. Substrate weights can be reduced by factors of from 6 to 30 times using different types of high permittivity layers. This concept has numerous applications in electrically small and lightweight antenna elements, as well as in resonators, microwave lenses, and other electromagnetic devices.
摘要:
One embodiment includes a blade antenna system. The system includes a ground plane and a planar substrate material extending orthogonally from the ground plane. The system also includes conductive material coupled to the planar substrate material in a coplanar or parallel manner. The conductive material can correspond to a radiating conductor. A portion of the planar substrate material between an edge of the conductive material and the ground plane can form a notch. The system further includes a magneto-dielectric material (MDM) arranged parallel with the planar substrate material to cover the notch.
摘要:
A parallel plate waveguide structure may be configured to suppress spurious propagating modes by including a lossy frequency selective surface (FSS) formed from a resistive film. The electromagnetic material properties of individual layers disposed between the conductive plates of the waveguide may be engineered to extend the suppression band of the fundamental TE mode up to the cutoff frequency of the second TE mode, and to simultaneously create a multi-octave TM mode suppression band. Applications include, for example, cavity mode suppression in microwave and millimeterwave assemblies at the board, package, and chip level.
摘要:
A parallel plate waveguide structure may be configured to suppress spurious propagating modes by including a lossy frequency selective surface (FSS). The electromagnetic material properties of individual layers disposed between the conductive plates of the waveguide may be engineered to extend the suppression band of the fundamental TE mode up to the cutoff frequency of the second TE mode. Examples of mode suppression structures are presented and analyzed by transverse resonance models. Applications include, for example, cavity mode suppression in microwave and millimeterwave assemblies at the board, package, and chip level.
摘要:
An antenna system is described which is comprised of an artificial magnetic conductor (AMC), an antenna element, and a feed network comprised of shielded feedlines whose outer conductor, or shield, is routed through the substrate of the AMC. The feedline outer conductor is connected to both the substantially continuous conductive surface and the array of capacitive patches forming the AMC. The shielded feedline suppresses the excitation of undesired TM modes within the AMC substrate, results in a stable return loss over a frequency range associated with the AMC's high surface impedance and surface wave bandgap.