摘要:
When transmitting an RF signal for power supply or a pulse signal for data transmission, amplification is made in such a manner that the peak power of the RF signal becomes greater than the peak power of the pulse signal. Thus transmitting the RF signal with the greater peak power enables charging of a capacitor 23 of noncontact wireless communication equipment 2 even if the distance to the noncontact wireless communication equipment 2 is long.
摘要:
A transmission device (10) includes: a series/parallel converter (11); an MSK modulator (31) for modulating a signal on a channel basis; a D/A converter (13); a frequency converter (14a) for conversion into different carrier frequencies; a synchronization circuit (32); an amplifier (15); a multiplexer (16) for multiplexing amplification signals; and an antenna (19). A reception device (20) includes: an antenna (21); a demultiplexer (22); a frequency converter (23) for converting signal demultiplexed on a channel basis into a baseband frequency; a low-pass filter (33) for removing a higher-harmonic component of the signal; an A/D converter (24); a digital filter (36) for extracting a main wave component from the digital signal; a sampling point detection circuit (35a) for detecting a sampling point from the main wave component; an MSK demodulator (34a) for reproducing and demodulating a symbol point based on detection information by an interpolation process; and a parallel/series converter (26) for restoring an original signal from the demodulated signal.
摘要:
When a transmission request for new data is issued under a situation where a plurality of data are transmitted to a specific service area from a plurality of service areas, a feeder link station searches an available frequency to be allocated to the new data in a down-link frequency band of the specific service area, and when any of data communications is completed, allocates a down-link frequency band used in the data communication as a down-link frequency band for the new data. A satellite repeater arranges the new data on the down-link frequency band right after the data communication is completed following a relay control by the feeder link station.
摘要:
When transmitting an RF signal for power supply or a pulse signal for data transmission, amplification is made in such a manner that the peak power of the RF signal becomes greater than the peak power of the pulse signal. Thus transmitting the RF signal with the greater peak power enables charging of a capacitor 23 of noncontact wireless communication equipment 2 even if the distance to the noncontact wireless communication equipment 2 is long.
摘要:
A wide-angle imaging device suitable for a monitor area of about 180 degrees. A first reflection mirror (1) is provided that has, around the rotation center axis (6) of a rotary symmetrical body, a reflection surface having an approximately ±90-degree convex shape with respect to a reference optical axis direction, an image forming lens (2) that has a principal point (7) on the rotation center axis of the first reflection mirror (1) and forms the image of a reflection beam from the first reflection mirror (1) and an imaging element (3) are disposed, and an object within approximately ±90 degrees around the rotation center axis of the first reflection mirror (1) is imaged.
摘要:
A carrier detector which is capable of performing high-accuracy carrier detection even with patterns other than a CR pattern by processing signals on the frequency axis, regardless of the existence of the residual frequency due to the quasi-coherent detection. The carrier detector converts a received signal having been subject to the quasi-coherent detection, A/D conversion, filtering for eliminating noises and expressed on the time axis into that expressed on the frequency axis by the time axis/frequency axis converting circuit. An accumulator 2 accumulatively adds the signals expressed on the frequency axis, and a decision section compares the accumulated value output from the accumulator to a predetermined threshold to detect the coming of the burst so as to detect the carrier.
摘要:
A method and an apparatus for obtaining a displacement condition of a track in a longitudinal direction thereof on a magnetic tape on which a periodic signal is recorded by detecting a signal position from image information obtained by imaging said track while moving the magnetic tape and/or the image device in the longitudinal direction of the track.
摘要:
A demultiplexing apparatus includes, in each of n stages, 2n FC+RXHBFs that down-sample a signal, from which a high-frequency component is removed after frequency conversion is carried out, and output the signal. The demultiplexing apparatus extracts, from an input signal including a plurality of band signals, the band signals to thereby demultiplex the input signal. The demultiplexing apparatus includes a reception-filter-bank control unit that calculates, based on channel information including bands and frequency arrangement of the band signals, a dividing position on a frequency axis and a frequency offset value indicating a frequency conversion value and instructs the FC+RXHBF, which is set as a target of output of divided signals of the input signal, about the calculated values. The FC+RXHBF carries out frequency conversion based on the frequency offset value.
摘要翻译:解复用装置在n个级中分别包括2n个FC + RXHBF,它们对进行频率转换之后的高频分量从其中被去除的信号进行下采样,并输出该信号。 解复用装置从包括多个频带信号的输入信号中提取频带信号,从而解复用输入信号。 解复用装置包括接收滤波器组控制单元,其基于包括频带信号的频带和频率排列的频道信息,频率轴上的分割位置和指示频率转换值的频率偏移值来计算,并且指示FC + RXHBF,其被设置为输入信号的分割信号的输出的目标,关于计算值。 FC + RXHBF基于频率偏移值进行频率转换。
摘要:
A communication apparatus that can suppress an increase in circuit size and reduce influence of interference, includes reception array antenna elements, a reception DBF network that generates a reception beam signal for forming M reception beams using a reception signal, and reception FBs that generate frequency split reception beam signals obtained by frequency-splitting the reception beam signal. The communication apparatus includes an interference-source detecting unit that stores, for each reception beam, an interference candidate beam area estimated based on an initial reception beam characteristic, calculates, based on the frequency split reception beam signals, a reception spectrum, and calculates, based on the reception spectrum and a reception spectrum of a reception beam to the interference candidate beam area, an interference source area. The reception DFB network generates a reception beam signal to perform null formation in the direction of the interference source area.
摘要:
An inspection system according to the present invention includes a sensor (2) that obtains a position of a delivery vehicle (6) that carries an item (7) attached with an electric tag; a communication control device (4) that calculates a communication area using the position that is obtained by the sensor (2), the communication area configured to cover an area between the delivery vehicle (6) and a carry-in/out entrance of the item (7); and an antenna device (1) that produces the communication area by controlling an antenna and performs, via the antenna, wireless communications with the electric tag (8) that is within the communication area. The inspection system automatically inspects all the items that are present between the delivery vehicle (6) and the carry-in/out entrance.