摘要:
Techniques for encoding and decoding data are described. In an aspect, multiple code rates for a forward error correction (FEC) code may be supported, and a suitable code rate may be selected based on packet size. A transmitter may obtain at least one threshold to use for code rate selection, determine a packet size to use for data transmission, and select a code rate from among the multiple code rates based on the packet size and the at least one threshold. In another aspect, multiple FEC codes of different types (e.g., Turbo, LDPC, and convolutional codes) may be supported, and a suitable FEC code may be selected based on packet size. The transmitter may obtain at least one threshold to use for FEC code selection and may select an FEC code from among the multiple FEC codes based on the packet size and the at least one threshold.
摘要:
Techniques for sending control information in a wireless communication system are described. A control segment may include L≧1 tiles, and each tile may include a number of transmission units. A number of control resources may be defined and mapped to the transmission units for the control segment. For symmetric mapping, multiple sets of S≧1 control resources may be formed, and each batch of L consecutive sets of S control resources may be mapped to S transmission units at the same location in the L tiles. For localized mapping, S>1, and each set of S control resources may be mapped to a cluster of S adjacent transmission units in one tile. For distributed mapping, S=1, and each control resource may be mapped to one transmission unit in one tile. For diversity, each control resource may be mapped to multiple (e.g., three) transmission units in at least one tile.
摘要:
Techniques for transmitting data with short-term interference mitigation in a wireless communication system are described. In one design, a serving base station may send a message to a terminal to trigger short-term interference mitigation. In response, the terminal may send a message to request at least one interfering base station to reduce interference on at least one resource. Each interfering base station may determine a transmit power level to be used for the at least one resource and may send a pilot at this transmit power level. The terminal may estimate the channel quality of the at least one resource based on at least one pilot received from the at least one interfering base station. The terminal may send information indicative of the estimated channel quality to the serving base station. The serving base station may send a data transmission on the at least one resource to the terminal.
摘要:
Techniques for transmitting data with short-term interference mitigation in a wireless communication system are described. In one design, a first station (e.g., a base station or a terminal) may send a first message to at least one interfering station to request reduction of interference on at least one resource. The first station may send the first message in anticipation of receiving data on the at least one resource. An interfering station may receive the first message from the first station and may reduce interference on the at least one resource by reducing its transmit power and/or by steering its power in a direction different from the first station. The first station may thereafter receive data from a second station on the at least one resource. The techniques may be used for data transmission on the forward and reverse links.
摘要:
Transmission schemes that can flexibly achieve the desired spatial multiplexing order, spatial diversity order, and channel estimation overhead order are described. For data transmission, the assigned subcarriers and spatial multiplexing order (M) for a receiver are determined, where M≧1. For each assigned subcarrier, M virtual antennas are selected from among V virtual antennas formed with V columns of an orthonormal matrix, where V≧M. V may be selected to achieve the desired spatial diversity order and channel estimation overhead order. Output symbols are mapped to the M virtual antennas selected for each assigned subcarrier by applying the orthonormal matrix. Pilot symbols are also mapped to the V virtual antennas. The mapped symbols are provided for transmission from T transmit antennas, where T≧V. Transmission symbols are generated for the mapped symbols, e.g., based on OFDM or SC-FDMA. Different cyclic delays may be applied for the T transmit antennas to improve diversity.
摘要:
Systems and methodologies are described that facilitate grouping pilot identifies to indicate type and/or classification information regarding one or more access points. The access points can select or be assigned pilot identifiers from the group indicating a type or classification related to the access points. Thus, identifiers can be grouped into macrocell and/or femtocell groups or ranges such that an access point can indicate, and mobile devices can efficiently determine, whether the access point provides macrocell or femtocell coverage based on a range from which its pilot identifier is selected or assigned. In addition, the pilot identifiers can be utilized to indicate restricted association information regarding the access points.
摘要:
Systems and methodologies are described that facilitate selecting and/or reselecting one or more access points, related cells, or carriers based at least in part on calculating an energy efficiency related to the access points. In particular, the energy efficiency can be based at least in part on an estimated pathloss and/or a level of interference related to communicating with the access points. Moreover, load parameters related to the access point can be received and evaluated in selecting and/or reselecting the access point. Thus, access points can be selected or reselected based on parameters other than forward link transmit power. In addition, pathloss and/or interference levels can be weighed based on access point type to prevent macrocell overloading.
摘要:
Systems and methodologies are described that facilitate dynamically supplementing or decrementing resource assignments to mobile devices in a wireless network environment without requiring transmission of replacement assignments. Supplemental assignments can be generated based on information related to mobile device need and resource availability. Moreover, resource assignments can be persisted for a mobile device.
摘要:
A method and apparatus of assigning selected interlace mode, the method comprising generating SelectedInterlaceAssignment message comprising SelectedInterlaceAssignment message comprising an 8 bit Message ID field, a 12 bit PilotPN field, a 1 bit SelectedInterlacesEnabled field, a 4 bit NumAssignedInterlaces field, and a 3 bit InterlaceID field, wherein, the PilotPN field is set to a PilotPN of the sector that sends SelectedInterlace Assignment message, the NumAssignedInterlaces field is set to the number of assigned interlaces, the InterlaceID field is set to an interlace assigned to the access terminal for SelectedInterlace operation and transmitting the generated SelectedInterlaceAssignment message over an OFDM communication link.
摘要:
Techniques for mitigating interference in a wireless communication system are described. In one design, a sector may determine multiple fast other sector interference (OSI) indications for multiple subzones, with each subzone corresponding to a different portion of the system bandwidth. At least one report may be generated for the multiple OSI indications, with each report including at least one OSI indication for at least one subzone. Each report may be encoded to obtain code bits, which may then be mapped to a sequence of modulation symbols. A sequence of modulation symbols of zero values may be generated for each report with all OSI indications in the report set to zero to indicate lack of high interference in the corresponding subzones. This allows a report to be transmitted with zero power in a likely scenario. A regular OSI indication may also be determined for the system bandwidth and transmitted.