摘要:
An aqueous sodium carbonate solution is added in an equivalent amount to an aqueous silver nitrate solution (Ag=100 g/L) under stirring and, with nitric acid and sodium hydroxide being added to adjust the pH to 5.5-6.5, a silver carbonate precipitate is formed and subsequently washed thoroughly and dried at 250.degree. C. or below to produce a silver oxide powder, which satisfactory characteristics for use in cells, as exemplified by high water absorption, good shape of granules, high strength, non-stickiness to the molding punch, high fluidity and low residual carbon content. The pellet of the powder has high cell capacity.
摘要:
An aqueous sodium carbonate solution is added in an equivalent amount to an aqueous silver nitrate solution (Ag=100 g/L) under stirring and, with nitric acid and sodium hydroxide being added to adjust the pH to 5.5-6.5, a silver carbonate precipitate is formed and subsequently washed thoroughly and dried at 250.degree. C. or below to produce a silver oxide powder, which satisfactory characteristics for use in cells, as exemplified by high water absorption, good shape of granules, high strength, non-stickiness to the molding punch, high fluidity and low residual carbon content. The pellet of the powder has high cell capacity.
摘要:
Sintered ITO having a relative density of at least 88% and an oxygen content of 15.5-17.0 wt %, as well as an ITO sputtering target made of this sintered ITO. Using the target, an optimal range for the proportion of oxygen in a mixture of argon and oxygen gases used as a sputtering atmosphere is sufficiently expanded to permit the consistent formation of ITO films.
摘要:
The starting salts for ITO production, precipitant and the conditions for reaction, calcination, etc. are specified such as to synthesize a starting oxide adapted to be free from volatile components such as halides and lower oxides; the starting oxide is dispersed to particles having a specified flowability; the powder is pressed into a compact, which is sintered in either air atmosphere or an oxygen-rich atmosphere to produce a large and high-density sinter for use as an ITO sputtering target.