摘要:
A self oscillating converter with regenerative switching includes circuitry to enhance the gain of circuity to turn off a MOSFET power switch and enhance the regenerative action culminating in turn off in order to eliminate bursting at low loads. The MOSFET power switching device turn off circuitry includes the addition of a supplementary drive transistor operative for counteracting the effects of the parasitic capacitances of the MOSFET power switching device. This permits the converter to operate with the shorter on times and to provide a low ripple output at very low load.
摘要:
An electronic circuit simulator technique dramatically reduces barriers to simulation of complex analog circuits. The simulator technique reduces simulation preparation time by permitting a skilled user to formulate a simulation strategy that can combine a modeling strategy, a deck extraction strategy, and a comprehensive suite of pre-engineered simulation tests that fully characterize a system under test. The simulation technique reduces the CPU time required for each test by allowing a skilled user to encode a device modeling strategy and a deck extraction strategy that effectively minimize the CPU time required to achieve a given simulation objective. For a given simulation objective, a skilled user chooses for each element implemented in a simulation a device model of minimum complexity that achieves a desired level of simulation accuracy and extracts a portion of the complete production schematic that achieves the desired level of simulation accuracy.
摘要:
A power converter circuit is disclosed utilizing pulse width modulation for power regulation. A rapid acting surge protection circuit for the power driving switch is operated from a string of zener diodes to disable the power switch. A base charge removal circuit is included for removing accumulated base charges on the driving transistor without the need for a bipolar driving signal for the power transistor.
摘要:
A multiple-output DC-DC converter has an electronically controllable reactor (64,66) connected in series with each output circuit. In response to variations in voltage of the output circuits (80,82), control signals are fed back to vary the permeance of the electronically controllable reactor (64,66) in each output circuit. The voltage in any output circuit is thereby made independent of input voltage variations and load fluctuations in any other output circuit.
摘要:
The start-up trajectory of the operating point of a DC-to-DC converter normally includes a high current locus which must be traversed to reach the steady-state operating point. In the case of a converter powered by a current-limited source, such as a power supply system where one converter powers a plurality of subsequent converters, the subsequent converters may be unable to turn on due to inadequate current drive. By using a control circuit adapted to control the start-up trajectory of a DC-to-DC converter as a continuous function of the input voltage applied to it by the current-limited source, the start-up characteristics are constrained to be compatible to both source and load permitting the converter to proceed to its steady-state operating point.
摘要:
A high stability integratable resistance-capacitance oscillator is disclosed which is capable of operating at a stable frequency regardless of changes in ambient temperature or applied voltages. The oscillator uses a temperature compensating impedance and semiconductor junction to compensate for temperature dependent variations in active elements of the oscillator. Constant current bias sources and voltage clamping circuits insure oscillations having predetermined amplitude ranges despite changes in applied voltages. Active transistors in the oscillator are maintained in their linear range by the use of antisaturation transistors connected between their base and collector electrodes.
摘要:
A power converter circuit is disclosed utilizing pulse width modulation for power regulation. A rapid acting surge protection circuit for the power driving switch is operated from a string of zener diodes to disable the power switch. A base charge removal circuit is included for dissipating accumulated base charges on the driving transistor without the need for a bipolar driving signal for the power transistor.