摘要:
A system including a current sensor to sense a current provided by an electronic power converter, the current sensor includes an output; an overcurrent detection circuit with an input coupled to an output of the current sensor; and a logic control circuit configurable to maintain the current provided by the electronic power converter in response to the sensed current having a short circuit magnitude, the logic control circuit including an input coupled to an output of the overcurrent detection circuit and at least one output coupled to at least one switch of the electronic power converter.
摘要:
A power system employs an outer voltage feedback loop and an inner current feedback loop to control a power converter, such as a DC to AC inverter for transferring electrical power between a power source, for example a photovoltaic array, and a load, for example a power grid. The outer loop accommodates variations in the output of the power source, for example accommodating anomalies in IV characteristics such as IV droop characteristic associated with photovoltaic cells. The outer loop may employ a first control regime or a second control regime, for example, dependent on whether a DC bus voltage or power is smaller than a value corresponding to measurement resolution or expected noise.
摘要:
Cycle error correction is performed in an electronic power system to compensate for a difference between an AC grid side frequency and an AC load side frequency. The electronic power system can comprise an electronic power inverter, such as one usable with an uninterruptible power supply. Cycles of signals indicative of the AC grid power and the AC load power are counted and compared to obtain a cycle error value. If the cycle error value exceeds a first value to indicate that AC load side frequency is too high or too low, then compensation is performed to change the AC load side frequency to be closer to the AC grid side frequency. If the cycle error value falls below a second value to indicate that the AC grid side frequency and AC load side frequency are sufficiently close to one another, then the compensation is deactivated.
摘要:
Cycle error correction is performed in an electronic power system to compensate for a difference between an AC grid side frequency and an AC load side frequency. The electronic power system includes an electronic power inverter, such as one usable with an uninterruptible power supply. Cycles of signals indicative of the AC grid power and the AC load power are counted and compared to obtain a cycle error value. If the cycle error value exceeds a first value to indicate that AC load side frequency is too high or too low, then compensation is performed to change the AC load side frequency to be closer to the AC grid side frequency. If the cycle error value falls below a second value to indicate that the AC grid side frequency and AC load side frequency are sufficiently close to one another, then the compensation is deactivated.
摘要:
Cycle error correction is performed in an electronic power system to compensate for a difference between an AC grid side frequency and an AC load side frequency. The electronic power system can comprise an electronic power inverter, such as one usable with an uninterruptible power supply. Cycles of signals indicative of the AC grid power and the AC load power are counted and compared to obtain a cycle error value. If the cycle error value exceeds a first value to indicate that AC load side frequency is too high or too low, then compensation is performed to change the AC load side frequency to be closer to the AC grid side frequency. If the cycle error value falls below a second value to indicate that the AC grid side frequency and AC load side frequency are sufficiently close to one another, then the compensation is deactivated.
摘要:
Cycle error correction is performed in an electronic power system to compensate for a difference between an AC grid side frequency and an AC load side frequency. The electronic power system can comprise an electronic power inverter, such as one usable with an uninterruptible power supply. Cycles of signals indicative of the AC grid power and the AC load power are counted and compared to obtain a cycle error value. If the cycle error value exceeds a first value to indicate that AC load side frequency is too high or too low, then compensation is performed to change the AC load side frequency to be closer to the AC grid side frequency. If the cycle error value falls below a second value to indicate that the AC grid side frequency and AC load side frequency are sufficiently close to one another, then the compensation is deactivated.
摘要:
A power converter system advantageously employs a modular, bi-directionally symmetrical power converter assembly in a readily customizable configuration to interconnect a direct current power source to a three-phase alternating power grid. Connections external to the power converter assembly are selected to optimize the power converter system for a specific application, such as interconnecting a photovoltaic array to the three-phase electrical power grid. The electrical interconnections of various elements including isolation transformers, voltage sensors, and control switches are optimized to improve efficiency and reliability.
摘要:
A power conversion system which comprises a controller and conversion assemblies which selectively rectify and invert an electrical signal. Conversion assemblies comprise a plurality of integrated gate bipolar transistor assemblies. The power conversion system is effective to convert DC current to AC current, to convert AC current to DC current, and to control the output frequency of a received electrical signal to a conventional operating range.
摘要:
Independent phase output voltage control for a 3-phase 4-wire DC/AC inverter, for example, is provided. With the independent phase output voltage control, all three phase output voltages from the DC/AC inverter can be separately and effectively controlled to provide balanced 3-phase voltages from the DC/AC inverter to an unbalanced load, and/or to provide unbalanced 3-phase voltages from the DC/AC inverter to a balanced or unbalanced load. The independent phase output voltage control method can be applied to an inverter power system, with outputs of N-phase (N+1) wire configurations. Here, N can be any integer number greater than zero.
摘要:
A switch/power conditioning module may be added to a hybrid vehicle to selectively supply power from an AC power bus to a load, providing on-vehicle standby power generating capability with a minimum of added hardware and/or when the vehicle is stationary.