摘要:
An orthogonal demodulating section converts the frequency of received signals to the lower range after rejecting an image band thereof by an RE filter. An image rejecting section rejects the image band of the orthogonally converted output. It allows enough of an image rejecting degree to be obtained. An A/D converter section converts the whole range into a digital signal and an orthogonal demodulating section demodulates a desirable channel by means of digital processing. Then, a channel selecting section selects and outputs the desirable channel.
摘要翻译:正交解调部通过RE滤波器将接收信号的频率抑制在其图像频带之后,将其接收信号的频率转换为较低范围。 图像拒绝部分拒绝正交转换输出的图像带。 它允许获得足够的图像拒绝度。 A / D转换器部分将整个范围转换为数字信号,并且正交解调部分通过数字处理解调期望的信道。 然后,频道选择部分选择并输出所需频道。
摘要:
An orthogonal demodulating section converts the frequency of received signals to the lower range in batch after rejecting an image band thereof by an RF filter. An image rejecting section rejects the image band of the orthogonally converted output. It allows an enough image rejecting degree to be obtained. An A/D converter section converts the whole range into a digital signal and an orthogonal demodulating section demodulates a desirable channel by means of digital processing. Then, a channel selecting section selects and outputs the desirable channel. It then allows wide-bands to be received in batch, flexible processing to be achieved by the digital processing and an enough image rejecting degree to be obtained.
摘要翻译:正交解调部在通过RF滤波器拒绝其图像频带之后,将接收信号的频率分批转换为较低范围。 图像拒绝部分拒绝正交转换输出的图像带。 它允许获得足够的图像拒绝度。 A / D转换器部分将整个范围转换为数字信号,并且正交解调部分通过数字处理解调期望的信道。 然后,频道选择部分选择并输出所需频道。 然后允许批量接收宽带,通过数字处理实现灵活处理,并获得足够的图像拒绝度。
摘要:
In a radio apparatus, the band of a loop filter of a synthesizer in a blank channel searching state is narrower than the band in a communicating state. In addition, a radio wave environment is measured. A characteristic necessary for the radio apparatus is determined corresponding to the measured radio wave environment. The power is controlled corresponding to the performance of the radio apparatus. Thus, the power consumption is decreased. In addition, the efficiency of the output power is improved. In the radio apparatus, the current consumption of a power amplifier PA is measured. A matching circuit (LNA or MIX) of the antenna is adjusted with the measured result so as to decrease an antenna loss. In the radio apparatus, a DC offset is removed from the transmitted power and the reflected wave. When the DC offset is removed using an AC coupling capacitor, the deterioration of the frequency characteristic of the receiving portion is compensated with a capacitor in a digital signal process. In the radio apparatus, a transmission power detecting portion is structured as an IC chip. The transmission power detecting portion detects the transmission power corresponding to leakage currents in the power supply of the IC chip and the ground. Thus, when the power is detected, a power loss is suppressed. Consequently, the power consumption of the radio apparatus can be decreased.
摘要:
In a radio apparatus, the band of a loop filter of a synthesizer in a blank channel searching state is narrower than the band in a communicating state. In addition, a radio wave environment is measured. A characteristic necessary for the radio apparatus is determined corresponding to the measured-radio wave environment. The power is controlled corresponding to the performance of the radio apparatus. Thus, the power consumption is decreased. In addition, the efficiency of the output power is improved. In the radio apparatus, the current consumption of a power amplifier PA is measured. A matching circuit (LNA or MIX) of the antenna is adjusted with the measured result so as to decrease an antenna loss. In the radio apparatus, a DC offset is removed from the transmitted power and the reflected wave. When the DC offset is removed using an AC coupling capacitor, the deterioration of the frequency characteristic of the receiving portion is compensated with a capacitor in a digital signal process. In the radio apparatus, a transmission power detecting portion is structured as an IC chip. The transmission power detecting portion detects the transmission power corresponding to leakage currents in the power supply of the IC chip and the ground. Thus, when the power is detected, a power loss is suppressed. Consequently, the power consumption of the radio apparatus can be decreased.
摘要:
In a radio apparatus, the band of a loop filter of a synthesizer in a blank channel searching state is narrower than the band in a communicating state. In addition, a radio wave environment is measured. A characteristic necessary for the radio apparatus is determined corresponding to the measured-radio wave environment. The power is controlled corresponding to the performance of the radio apparatus. Thus, the power consumption is decreased. In addition, the efficiency of the output power is improved. In the radio apparatus, the current consumption of a power amplifier PA is measured. A matching circuit (LNA or MIX) of the antenna is adjusted with the measured result so as to decrease an antenna loss. In the radio apparatus, a DC offset is removed from the transmitted power and the reflected wave. When the DC offset is removed using an AC coupling capacitor, the deterioration of the frequency characteristic of the receiving portion is compensated with a capacitor in a digital signal process. In the radio apparatus, a transmission power detecting portion is structured as an IC chip. The transmission power detecting portion detects the transmission power corresponding to leakage currents in the power supply of the IC chip and the ground. Thus, when the power is detected, a power loss is suppressed. Consequently, the power consumption of the radio apparatus can be decreased.
摘要:
In a radio apparatus, the band of a loop filter of a synthesizer in a blank channel searching state is narrower than the band in a communicating state. In addition, a radio wave environment is measured. A characteristic necessary for the radio apparatus is determined corresponding to the measured-radio wave environment. The power is controlled corresponding to the performance of the radio apparatus. Thus, the power consumption is decreased. In addition, the efficiency of the output power is improved. In the radio apparatus, the current consumption of a power amplifier PA is measured. A matching circuit (LNA or MIX) of the antenna is adjusted with the measured result so as to decrease an antenna loss. In the radio apparatus, a DC offset is removed from the transmitted power and the reflected wave. When the DC offset is removed using an AC coupling capacitor, the deterioration of the frequency characteristic of the receiving portion is compensated with a capacitor in a digital signal process. In the radio apparatus, a transmission power detecting portion is structured as an IC chip. The transmission power detecting portion detects the transmission power corresponding to leakage currents in the power supply of the IC chip and the ground. Thus, when the power is detected, a power loss is suppressed. Consequently, the power consumption of the radio apparatus can be decreased.
摘要:
In a radio apparatus, the band of a loop filter of a synthesizer in a blank channel searching state is narrower than the band in a communicating state. In addition, a radio wave environment is measured. A characteristic necessary for the radio apparatus is determined corresponding to the measured radio wave environment. The power is controlled corresponding to the performance of the radio apparatus. Thus, the power consumption is decreased. In addition, the efficiency of the output power is improved. In the radio apparatus, the current consumption of a power amplifier PA is measured. A matching circuit (LNA or MIX) of the antenna is adjusted with the measured result so as to decrease an antenna loss. In the radio apparatus, a DC offset is removed from the transmitted power and the reflected wave. When the DC offset is removed using an AC coupling capacitor, the deterioration of the frequency characteristic of the receiving portion is compensated with a capacitor in a digital signal process. In the radio apparatus, a transmission power detecting portion is structured as an IC chip. The transmission power detecting portion detects the transmission power corresponding to leakage currents in the power supply of the IC chip and the ground. Thus, when the power is detected, a power loss is suppressed. Consequently, the power consumption of the radio apparatus can be decreased.
摘要:
In a radio apparatus, the band of a loop filter of a synthesizer in a blank channel searching state is narrower than the band in a communicating state. In addition, a radio wave environment is measured. A characteristic necessary for the radio apparatus is determined corresponding to the measured-radio wave environment. The power is controlled corresponding to the performance of the radio apparatus. Thus, the power consumption is decreased. In addition, the efficiency of the output power is improved. In the radio apparatus, the current consumption of a power amplifier PA is measured. A matching circuit (LNA or MIX) of the antenna is adjusted with the measured result so as to decrease an antenna loss. In the radio apparatus, a DC offset is removed from the transmitted power and the reflected wave. When the DC offset is removed using an AC coupling capacitor, the deterioration of the frequency characteristic of the receiving portion is compensated with a capacitor in a digital signal process. In the radio apparatus, a transmission power detecting portion is structured as an IC chip. The transmission power detecting portion detects the transmission power corresponding to leakage currents in the power supply of the IC chip and the ground. Thus, when the power is detected, a power loss is suppressed. Consequently, the power consumption of the radio apparatus can be decreased.
摘要:
A receiver having a function of a direct current offset, and including a receiving section for receiving a radio frequency signal, an analog signal processing section for amplifying, band-converting and frequency-converting an analog signal inputted from the receiving section, and an AD converting section for converting an output of the analog signal processing section from an analog signal to a digital signal. Also included is a digital signal processing section for processing the digital signal converted by the DC converting section. The receiver further includes an offset detecting element, provided in the digital signal processing section, for detecting a direct current offset signal produced in the receiving section or a frequency converting section, an offset holding element, provided in the digital signal processing section, for holding the direct current offset signal detected by the offset detecting element, a DA converting section for converting the direct current offset signal detected by the digital signal processing section into an analog signal, and a first offset correcting element, provided in the analog signal processing section, for correcting the analog signal on the basis of the direct current offset signal converted by the DA converting section into the analog signal.
摘要:
A frequency conversion apparatus comprising a sampling circuit for receiving a first intermediate frequency signal extracted from an input signal and having a predetermined intermediate frequency and a predetermined band width and sampling the first intermediate frequency signal in accordance with a predetermined sampling frequency signal, to output a second intermediate frequency signal, and a sampling signal generator for outputting the sampling frequency signal to the sampling circuit, the sampling frequency signal having a frequency determined so that an integer multiple of not less than three times the sampling frequency is outside a frequency range of the input signal.