摘要:
An APIX100-grade high strength steel pipe includes a base material containing, in mass percentage, C: more than 0.03% and 0.08% or less, Si: 0.01% to 0.5%, Mn: 1.5% to 3.0%, P: 0.015% or less, S: 0.005% or less, Al: 0.01% to 0.08%, Nb: 0.005% to 0.025%, Ti: 0.005% to 0.025%, N: 0.001% to 0.010%, O: 0.005% or less, and B: 0.0003% to 0.0020%, further contains one or more of Cu, Ni, Cr, Mo, and V, satisfies 0.19≦Pcm≦0.25, the balance being Fe and unavoidable impurities, and has a TS of 760 to 930 MPa, a uniform elongation of 5% or more, and a YR of 85% or less; the seam weld metal has a specific composition.
摘要:
An APIX100-grade high strength steel pipe includes a base material containing, in mass percentage, C: more than 0.03% and 0.08% or less, Si: 0.01% to 0.5%, Mn: 1.5% to 3.0%, P: 0.015% or less, S: 0.005% or less, Al: 0.01% to 0.08%, Nb: 0.005% to 0.025%, Ti: 0.005% to 0.025%, N: 0.001% to 0.010%, O: 0.005% or less, and B: 0.0003% to 0.0020%, further contains one or more of Cu, Ni, Cr, Mo, and V, satisfies 0.19≦Pcm≦0.25, the balance being Fe and unavoidable impurities, and has a TS of 760 to 930 MPa, a uniform elongation of 5% or more, and a YR of 85% or less; the seam weld metal has a specific composition.
摘要:
Provided is a low yield ratio, high strength and high toughness steel plate having excellent strain ageing resistance equivalent to API 5L X70 Grade or lower and a method for manufacturing the same. The steel plate has a metallographic microstructure that is a three-phase microstructure consisting of bainite, M-A constituent, and quasi-polygonal ferrite, the area fraction of the bainite being 5% to 70%, the area fraction of the M-A constituent being 3% to 20%, the remainder being the quasi-polygonal ferrite, the equivalent circle diameter of the M-A constituent being 3.0 μm or less. The steel plate has a yield ratio of 85% or less and a Charpy impact test absorbed energy of 200 J or more at −30° C. before or after being subjected to strain ageing treatment at a temperature of 250° C. or lower for 30 minutes or less.
摘要:
Provided is a low yield ratio, high strength and high uniform elongation steel plate having excellent strain ageing resistance equivalent to API 5L X70 Grade or lower and a method for manufacturing the same. In particular, the steel plate contains 0.06% to 0.12% C, 0.01% to 1.0% Si, 1.2% to 3.0% Mn, 0.015% or less P, 0.005% or less S, 0.08% or less Al, 0.005% to 0.07% Nb, 0.005% to 0.025% Ti, 0.010% or less N, and 0.005% or less O on a mass basis, the remainder being Fe and unavoidable impurities. The low yield ratio, high strength and high uniform elongation steel plate has a metallographic microstructure that is a two-phase microstructure consisting of bainite and M-A constituent, the area fraction of the M-A constituent being 3% to 20%, the equivalent circle diameter of the M-A constituent being 3.0 μm or less.
摘要:
Provided is a low yield ratio, high strength and high toughness steel plate having excellent strain ageing resistance equivalent to API 5L X70 Grade or lower and a method for manufacturing the same. The steel plate has a metallographic microstructure that is a three-phase microstructure including bainite, M-A constituent, and quasi-polygonal ferrite, the area fraction of the bainite being 5% to 70%, the area fraction of the M-A constituent being 3% to 20%, the remainder being the quasi-polygonal ferrite, the equivalent circle diameter of the M-A constituent being 3.0 μm or less. The steel plate has a yield ratio of 85% or less and a Charpy impact test absorbed energy of 200 J or more at −30° C. before or after being subjected to strain ageing treatment at a temperature of 250° C. or lower for 30 minutes or less.
摘要:
Provided is a low yield ratio, high strength and high uniform elongation steel plate having excellent strain ageing resistance equivalent to API 5L X70 Grade or lower and a method for manufacturing the same. In particular, the steel plate contains 0.06% to 0.12% C, 0.01% to 1.0% Si, 1.2% to 3.0% Mn, 0.015% or less P, 0.005% or less S, 0.08% or less Al, 0.005% to 0.07% Nb, 0.005% to 0.025% Ti, 0.010% or less N, and 0.005% or less O on a mass basis, the remainder being Fe and unavoidable impurities. The low yield ratio, high strength and high uniform elongation steel plate has a metallographic microstructure that is a two-phase microstructure consisting of bainite and M-A constituent, the area fraction of the M-A constituent being 3% to 20%, the equivalent circle diameter of the M-A constituent being 3.0 μm or less.
摘要:
A steel plate for line pipes containing, in terms of % by weight, C: 0.02 to 0.06%, Si: 0.5% or less, Mn: 0.8 to 1.6%, P: 0.008% or less, S: 0.0008% or less, Al: 0.08% or less, Nb: 0.005 to 0.035%, Ti: 0.005 to 0.025%, and Ca: 0.0005 to 0.0035%, and optionally contains one or more of Cu: 0.5% or less, Ni: 1% or less, Cr: 0.5% or less, Mo: 0.5% or less and V: 0.1% or less, and has a CP value of 0.95 or less represented by CP=4.46C(%)+2.37Mn(%)/6+{1.18Cr(%)+1.95Mo(%)+1.74V(%)}/5+{1.74Cu(%)+1.7Ni(%)}/15+22.36P(%), and a Ceq value of 0.30 or more represented by Ceq=C(%)+Mn(%)/6+{Cr(%)+Mo(%)+V(%)}/5 +{Cu(%)+Ni(%)}/15.
摘要:
Provided is a steel pipe for a linepipe having high compressive strength, a heavy wall thickness and sour gas resistance. The steel pipe has the composition which contains by mass % 0.02 to 0.06% C, 0.01 to 0.5% Si, 0.8 to 1.6% Mn, 0.012% or less P, 0.0015% or less S, 0.01 to 0.08% Al, 0.005 to 0.050% Nb, 0.005 to 0.025% Ti, 0.0005 to 0.0035% Ca, 0.0020 to 0.0060% N, and Fe and unavoidable impurities as a balance. The steel pipe has metal microstructure where a fraction of bainite is 80% or more, a fraction of M-A constituent is 2% or less and an average grain size of bainite is 5 μm or less.
摘要:
Provided is a steel pipe for a linepipe having high compressive strength, a heavy wall thickness and sour gas resistance. The steel pipe has the composition which contains by mass % 0.02 to 0.06% C, 0.01 to 0.5% Si, 0.8 to 1.6% Mn, 0.012% or less P, 0.0015% or less S, 0.01 to 0.08% Al, 0.005 to 0.050% Nb, 0.005 to 0.025% Ti, 0.0005 to 0.0035% Ca, 0.0020 to 0.0060% N, and Fe and unavoidable impurities as a balance. The steel pipe has metal microstructure where a fraction of bainite is 80% or more, a fraction of M-A constituent is 2% or less and an average grain size of bainite is 5 μm or less.
摘要:
A steel plate for line pipes containing, in terms of % by weight, C: 0.02 to 0.06%, Si: 0.5% or less, Mn: 0.8 to 1.6%, P: 0.008% or less, S: 0.0008% or less, Al: 0.08% or less, Nb: 0.005 to 0.035%, Ti: 0.005 to 0.025%, and Ca: 0.0005 to 0.0035%, and optionally contains one or more of Cu: 0.5% or less, Ni: 1% or less, Cr: 0.5% or less, Mo: 0.5% or less and V: 0.1% or less, and has a CP value of 0.95 or less represented by CP=4.46C(%)+2.37Mn(%)/6+{1.18Cr(%)+1.95Mo(%)+1.74V(%)}/5+{1.74Cu(%)+1.7Ni(%)}/15+22.36P(%), and a Ceq value of 0.30 or more represented by Ceq=C(%)+Mn(%)/6+{Cr(%)+Mo(%)+V(%)}/5+{Cu(%)+Ni(%)}/15.