摘要:
A vent for a dishwasher provides a valve with dual actuation, either to be electrically actuated according to a cycle of the dishwasher so as to close during periods of high noise generation, typically the wash cycle, and opened during the dry cycle, or to be actuated independently of the cycle under pressure differences such as may be caused by interruption of the dishwasher cycle and opening and closing of the dishwasher door such as may cause a pressure surge as the introduced cool air is rapidly heated in the interior of the dishwasher.
摘要:
A latch for a washing machine or other appliance provides two interengaging elements on a lid and housing each having a magnet oriented for mutual repulsion. Proper repulsion of the magnets is necessary to signal that the lid is properly closed such as may be used to determine if the appliance may be locked and safely operated, for example, in a clothes spinning mode.
摘要:
A transportation-robust bi-stable latch mechanism preserves low actuation forces by means of an auxiliary mechanism blocking the effects of shock forces during transportation.
摘要:
An electrical linear actuator employs a reversible motor driving a helical wire spring. The coils of the spring engage a follower that moves along the axis of the spring with rotation of the motor to provide linear motion. This actuator may be used as a linear drive in an appliance lock.
摘要:
An electrical linear actuator employs a reversible motor driving a helical wire spring. The coils of the spring engage a follower that moves along the axis of the spring with rotation of the motor to provide linear motion. This actuator may be used as a linear drive in an appliance lock.
摘要:
An electrically operable door latch employs a permanent magnet for retaining an appliance door closed against the force of a resilient seal. An electromagnet bucks the magnetic attraction of the permanent magnet allowing the latch to be electronically releasable. A simple mechanism and inherent force limits are obtained by a direct magnetic attraction between a strike plate and the latch, one on the door and one on the housing.
摘要:
A motorized lock for a vending machine provides a simple lever mechanism that provides two separate points of engagement between the door and the machine to resist tampering and provide for more even pull in of a gasketed door.
摘要:
In a rotary switch, a manually rotatable shaft turns a disk which has a plurality of riser cam segments on one of its face. Stepwise rotation of the disk causes the cam segments to press down on flat spring contacts arranged in the switch to put the tip of one of the contacts at a time into electric contact with a stationary electrical contact that is connected to a source of electric potential or, in the alternative, to relieve one of the contacts from being pressed onto the stationary contact. An index wheel mounts to the shaft and has equiangularly spaced grooves. A plastic spring having parallel legs is mounted on the base of the switch. The legs have convex detents which register in successive grooves as the rotor is indexed rotationally in a stepwise fashion. The radius of the detents is greater than the radius of the grooves between the teeth of the index wheel. The legs of the spring are prohibited from moving longitudinally and tension is maintained in the spring legs at all times.
摘要:
A casing (11, 12) holds an actuator (18) having a stem (21) that is moves a plunger with substantial force in response to the actuator (18) being heated. The movement of the plunger (22) loads a compression spring (23) that is located between a base end of the plunger (22) and an opposing end wall of the casing. Two longitudinal casing sections (11, 12) form arcuate projections (43, 44) on the opposing end wall (49) which are inserted within at least one coil of the spring with an interference fit to hold the casing half sections together. Beams (64, 65, 74, 75) adjacent the base end wall (17) add support against the thrust reaction movement of the actuator housing (18) in response to movement of the plunger (22) against the compression spring (23).
摘要:
A rotary actuator suitable for use in a refrigerator ice-dispensing door provides a rotating shaft driven by a DC permanent magnet motor through a gear train and subject to a returning force of an internal spring. The gear train communicates with a switch to reduce current to the motor when a limit of travel is reached and a shunting path is provided around the motor to produce generative braking when power is removed from the motor and the actuator rotates backward to its initial position.