摘要:
A quick change pump assembly for an adhesive pumping system includes three main components: a manifold, a pump, and a motor. These components are secured to a subframe which is adapted to be detachably mounted on the mainframe of the system. The subframe with the three components mounted thereon is selectively movable between an operating position and a withdrawn position. In the withdrawn position, any of the components on the subframe may be replaced or repaired.
摘要:
An in-line continuous method of formulating and applying a hot melt adhesive to a substrate involves metering a particulate polymer adhesive and a tackifier in a weight ratio in an extruder where the raw materials are formed into a homogeneous melt. The melt is continuously discharged directly into a hot melt applicator for deposition onto a substrate.
摘要:
A six-sided fibrous batting is coated with a nonwoven polymeric material by passing the batt sequentially through three coating stations. Four sides of the batt are coated in the first two stations and, after the batt is turned 90.degree., the final two sides are coated, completely encapsulating the batt in fibrous nonwoven coating.
摘要:
Modular die constructions includes a plurality of side-by-side self-contained, interchangeable meltblowing modules on a manifold so that the length of the die can be varied by adding modules or removing modules from the manifold.
摘要:
A meltblowing die assembly featuring a preassembled die tip assembly permitting the rapid exchange thereof. The preassembled die tip assembly includes a die tip having a triangular nosepiece, a member mounted on the die tip assembly for conforming the die tip to the die body, and a pair of air plates mounted on the die tip and in combination with the nosepiece define converging air slots.
摘要:
A meltblowing system with a modular die design and on-line monitoring of web properties is described. The modular die consists of individually fed side-by-side meltblowing units. Automated control of the polymer feed rates to the units have been shown to produce a web with excellent uniformity of basis weight. The die also features a valve assembly for minimizing polymer afterflow and die tip plugging.
摘要:
A hot melt adhesive polymer is applied to a diaper backsheet by an aligned series of meltblowing units which are selectively operable to apply the coating in the desired geometry on the diaper backsheet.
摘要:
A meltblowing die assembly features (a) intermittent operation, (b) modular valve actuator to selectively shut off polymer flow, (c) an in-line electric heater, and (d) meltblowing units arranged in side-by-side relationship.
摘要:
A nozzle assembly and method for delivering swirls of a thermoplastic melt to a substrate operate on the principle of contacting a thermoplastic spun filament with swirling air to impart a circular swirling expanding cone pattern to the filament. The swirling filament is deposited on a substrate or collector as circular beads.
摘要:
A polymer metl delivery system includes a preheated hopper, a high clearance auger, a gear pump, and provisions for delivering heat to the polymer. The resin is melted and fed to the auger and pumped to the gear pump and further pump to an extrusion die. Heat is added to the polymers from the hopper and throughout its course to the outlet connection for the extrusion die. The preheated in the hopper includes heat conductive fins. The system is particularly suited for use in combination with a meltblowing die.