摘要:
A control device for a rotating electrical machine, which is able to reduce a tracking delay of an actual output torque and actual currents with respect to a fluctuating torque command and fluctuating current commands and to reduce steady state deviations, is obtained. The control device includes a torque current computing unit; an actual current computing unit; a current feedback control unit; and a voltage control unit that controls voltages on the basis of the two-phase voltage commands. The torque command includes a fluctuation cancellation torque command for cancelling transmission torque fluctuations transmitted from the internal combustion engine, and the current feedback control unit includes a harmonic controller that calculates the two-phase voltage commands by using a characteristic of a transfer function corresponding to a periodic function of a frequency of the transmission torque fluctuations.
摘要:
A control device for a rotating electrical machine, which is able to reduce a tracking delay of an actual output torque and actual currents with respect to a fluctuating torque command and fluctuating current commands and to reduce steady state deviations, is obtained. The control device includes a torque current computing unit; an actual current computing unit; a current feedback control unit; and a voltage control unit that controls voltages on the basis of the two-phase voltage commands. The torque command includes a fluctuation cancellation torque command for cancelling transmission torque fluctuations transmitted from the internal combustion engine, and the current feedback control unit includes a harmonic controller that calculates the two-phase voltage commands by using a characteristic of a transfer function corresponding to a periodic function of a frequency of the transmission torque fluctuations.
摘要:
An electric motor drive control apparatus includes a detection angle obtaining section that obtains the detection angle of the resolver; a correction information storage section that stores correction information for correcting the detection angle, in association with a modulation ratio that is a ratio of an effective value of a fundamental wave component of the AC voltage to the system voltage; and a detection angle correcting section that obtains the correction information from the correction information storage section, based on the modulation ratio at the time the detection angle obtaining section obtains the detection.
摘要:
An electric motor drive control apparatus includes a detection angle obtaining section that obtains the detection angle of the resolver; a correction information storage section that stores correction information for correcting the detection angle, in association with a modulation ratio that is a ratio of an effective value of a fundamental wave component of the AC voltage to the system voltage; and a detection angle correcting section that obtains the correction information from the correction information storage section, based on the modulation ratio at the time the detection angle obtaining section obtains the detection.
摘要:
An inverter control section controls the inverter by controlling an armature current in a two-axis orthogonal coordinate system that rotates in synchronization with the rotary electric machine, the armature current being a vector obtained by synthesizing a field current and a drive current extending along respective axes of the orthogonal coordinate system. If it is determined that connection between the DC power source section and the inverter is in a blocked state, the inverter control section executes zero-torque control in which the inverter is controlled such that torque regenerated by the rotary electric machine becomes zero, and executes high-loss control in which the field current is varied so as to increase the armature current while maintaining a torque command provided in the zero-torque control.
摘要:
A device and related method for mixing a powdered component and a liquid component with minimal user interaction are described. A powdered component and a liquid component are separately fed into a mixing chamber. The powdered component may be released into the liquid component by removing a barrier. Alternatively, the two components are drawn into the mixing chamber from respective sources by a vacuum. The mixture is sonicated at precise vibrational frequencies to control the physical properties of the final blended content. A piston-like device is used to remove the blended content from the mixing chamber.
摘要:
A method for sintering ceramic materials using a microwave hybrid heating system includes the steps of providing a ceramic member to be sintered, providing a microwave furnace, providing a thermal containment box comprising a material that is virtually transparent to microwave energy, providing at least one susceptor comprising a material that directly couples to microwave energy at room temperature substantially immediately within the thermal containment box, positioning the ceramic member within the thermal containment chamber proximate the susceptor, and irradiating the thermal containment box with microwave energy. The susceptor couples to the microwave energy and generates heat within the thermal containment box and the temperature of the ceramic member increases to the microwave coupling-trigger temperature, at which time the ceramic member couples directly to the microwave energy and is directly sintered by the microwave energy in cooperation with radiant energy from the one susceptor.
摘要:
A control device that controls an electric motor drive device is configured with a current control portion that determines a voltage command value, a voltage control portion that generates a switching control signal, and a current control period determining portion. The control device is also configured with a voltage control period determining portion that determines a voltage control period, and a control period setting portion. In the control device, the current control period determining portion determines, according to a target torque, the current control period as a value that increases continuously or stepwise as the target torque decreases. Furthermore, the voltage control period determining portion determines, according to a rotating speed, the voltage control period as a value that increases continuously or stepwise as the rotating speed decreases.
摘要:
A control system includes an electric rotating machine; a driving circuit that is connected to a DC power supply, the driving circuit includes a frequency conversion unit configured such that, when the electric rotating machine is to be driven in a power running mode, the frequency conversion unit converts an output of the DC power supply into AC electric power, and when the electric rotating machine is to be driven in a regenerative operation mode, the frequency conversion unit converts an output of the electric rotating machine into DC electric power; and a control unit that controls the driving circuit, wherein the control unit judges whether a connection between the DC power supply and the driving circuit is being maintained, and is configured such that, when the connection is not being maintained, regenerative electric power generated by the electric rotating machine is reduced by controlling the driving circuit.
摘要:
A electric motor drive apparatus comprising a voltage control unit performing voltage control processing that determines alternating-current voltage command values serving as command values of the alternating-current voltages to be supplied to the alternating-current electric motor and generates switching control signals for the inverter; and a control mode selection unit selecting a synchronous control mode in which a cycle of electric angle of the alternating-current electric motor is synchronized with a switching cycle of the inverter, or an asynchronous control mode in which the cycles are not synchronized with each other. Current detection processing is performed to detect currents flowing in coils of the alternating-current electric motor in every standard calculation cycle that is set to a half of a cycle of the carrier.