摘要:
A system for detecting a jack configuration comprising a first plurality of switches configured to couple a first headphone jack position to ground. A second plurality of switches configured to couple a second headphone jack position to ground. A microphone bias circuit for applying a microphone bias signal to the second headphone jack position when the first headphone jack position is coupled to ground, and for applying the microphone bias signal to the first headphone jack position when the second headphone jack position is coupled to ground.
摘要:
High linearity is essential in audio circuitry. As sampling rates for audio applications are needed, high speed and high linearity are needed in analog and mixed signal portions of audio circuitry such as in current mirrors. A current mirror employs two current paths in an output. The first current path is driven by a fast acting transistor through a resistor. The second current path is driven by a differential amplifier coupled to another transistor through another resistor. The second current path is used to maintain linearity by causing the voltage across both transistors to be the same.
摘要:
A system for detecting a jack configuration comprising a first plurality of switches configured to couple a first headphone jack position to ground. A second plurality of switches configured to couple a second headphone jack position to ground. A microphone bias circuit for applying a microphone bias signal to the second headphone jack position when the first headphone jack position is coupled to ground, and for applying the microphone bias signal to the first headphone jack position when the second headphone jack position is coupled to ground.
摘要:
Presently many audio chips suffer from pop issues, which is especially serious for single ended audio drivers. An audio pop is a disturbance in the output caused by a sudden transition of chip power, particularly when a chip is powered on or powered off. Furthermore, compensation networks included in the amplifiers on audio chips for stability offer a significant path for transmitting power disturbances to the output. Hence, circuitry is developed to suppress pops in the output stages of an amplifier.
摘要:
Direct current (DC) offset in and audio driver can cause a constant drain on power even when there is no sound. Furthermore it can cause an audible pop when the audio driver is enabled. A scaled replica output stage can be employed to perform DC offset cancellation offline during a sampling phase. Once DC offset cancellation is achieved, the audio driver uses a full scale output stage during the operation phase.
摘要:
A circuit for providing a reference voltage can be widely used in audio applications. However, at startup an abrupt start in the reference signal can cause undesirable audible artifacts. A circuit employing feedback of a reference voltage to control the charging of a capacitor which provides the reference voltage can be used to provide a smooth startup to the reference voltage. The circuit contains a differential pair for steering a fixed current source from one path to another as the reference voltage increases. The steered current can then be mirrored into one ore more current mirrors where the newly mirrored current can be squeezed to zero when the difference between a desired reference voltage and the reference voltage approaches zero. This newly mirrored current can be used to charge a capacitor which is used to provide the reference voltage.
摘要:
An integrated audio codec includes a high-pass filter to prevent damage to personal computer speakers and other components. The audio codec may be compliant with HD audio standards and can operate with generic software drivers. Tuning of the high-pass filter is provided through an external pin-out where either an external capacitor or external resistors provide an ability to tune the high-pass filter. In one implementation, a tuning voltage is digitized into a tuning code used by a digital high-pass filter. In addition, multiplexers can be used to insure only the audio path leading to the speakers is filtered.
摘要:
A driver controller comprising a state machine for controlling transitions between a plurality of states. An output switch for providing a low impedance path to ground during transition periods. An output stage for decoupling output signal from driver amplifier during the transition periods.
摘要:
Presently many audio chips suffer from pop issues, which is especially serious for single ended audio drivers. An audio pop is a disturbance in the output caused by a sudden transition of chip power, particularly when a chip is powered on or powered off. Furthermore, compensation networks included in the amplifiers on audio chips for stability offer a significant path for transmitting power disturbances to the output. Hence, circuitry is developed to suppress pops in the output stages of an amplifier.
摘要:
A circuit for providing a reference voltage can be widely used in audio applications. However, at startup an abrupt start in the reference signal can cause undesirable audible artifacts. A circuit employing feedback of a reference voltage to control the charging of a capacitor which provides the reference voltage can be used to provide a smooth startup to the reference voltage. The circuit contains a differential pair for steering a fixed current source from one path to another as the reference voltage increases. The steered current can then be mirrored into one ore more current mirrors where the newly mirrored current can he squeezed to zero when the difference between a desired reference voltage and the reference voltage approaches zero. This newly mirrored current can he used to charge a capacitor which is used to provide the reference voltage.